ik gebruik dvd shrink. normaal gezien geen problemen. nu wilde het de laatste tijd maar niet lukken om te branden. kreeg iedere keer een foutmelding. nu viel het me ineens op dat dat is sinds ik een andere soort dvd-r gebruik. ik ging nu gaan kijken bij mij dvd-rw en toen zag ik beschikbaar 0 ,gebruikt 0. doos van 25 en die zijn allemaal zo. zijn dit slechte of kan mijn dvd-rw die niet gebruiken? dvd-r van sentinel geschikt voor data ,audio,games,photo en video. snelheid 2X. mijn dvd-rw is een benq,nog maar enkele maanden oud. Zou graag iets weten want stel dat ik andere koop en ze zijn ook niet geschikt.
"Dé grootste en gratis computerhelpdesk van Nederland"
kapotte dvd's ?
- Onderwerp starter tam
- Startdatum
- Status
luuk2512
Verenigingslid
- Lid geworden
- 16 jan 2001
- Berichten
- 2.093
misschien moet je de laatste firmware voor je brander even bij benq van de site halen.
http://www.benq.nl/ServiceAndSupport/downloads/index.cfm?productline=14
http://www.benq.nl/ServiceAndSupport/downloads/index.cfm?productline=14
ik heb dat gedaan ,die firmware maar het probleem blijft. ik zet hier even de foutmelding die ik krijg
1A23-0009-5030-1452-8119-1318
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 4:03:20
ahead WinASPI: File 'C:\programma\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 16:33:44
Nero API version: 6.3.1.20
Using interface version: 6.3.1.4
Installed in: C:\programma\ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <ATAPI DVD DUAL 8X4X12> Version: B3BC - HA 0 TA 1 - 6.3.1.20
Adapter driver: <atapi> HA 0
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP0802N atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVD DUAL 8X4X12 atapi Port 0 ID 1 DMA: On
DiskPeripheral : Maxtor 5T040H4 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AOPEN CD-RW CRW1232PRO atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
ATAPI DVD DUAL 8X4X12 F: CDRom0
AOPEN CD-RW CRW1232PRO G: CDRom1
AXV CD/DVD-ROM H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 182MB (186776kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
30.12.2004
NeroAPI
20:49:30 #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started
20:49:30 #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)
20:49:30 #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted
20:49:30 #4 Text 0 File Reader.cpp, Line 126
Reader running
20:49:30 #5 Text 0 File Writer.cpp, Line 124
Writer ATAPI DVD DUAL 8X4X12 running
20:49:30 #6 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
20:49:30 #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
20:49:31 #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
20:49:31 #9 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-At-Once, using DVD media
20:49:31 #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
20:49:31 #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO
20:49:31 #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: ATAPI DVD DUAL 8X4X12, Media type: DVD-R
Disc Manufacturer: OPTODI - SCK001
Disc Application Code: 64, Disc Physical Code: 193
20:49:31 #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
20:49:31 #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [ATAPI DVD DUAL 8X4X12 ]
--------------------------------------------------------------
20:49:31 #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [ATAPI DVD DUAL 8X4X12 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286128 | lead-out | 1 | 0x00 | 0x41
20:49:31 #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started
20:49:32 #17 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.
20:49:32 #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed
20:49:32 #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 2.4x (3.324 KB/s)
20:49:32 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
20:49:32 #21 Text 0 File DVDR.cpp, Line 1942
Recording mode: Sequential Recording Mode
20:49:32 #22 Text 0 File Mmc.cpp, Line 20531
Set BUFE: Seamless Link -> ON
20:49:32 #23 Text 0 File DVDR.cpp, Line 2083
Start write address at LBA 0
DVD high compatibility mode: Yes
20:49:32 #24 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
20:49:36 #25 SCSI -1064 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x01420000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x01 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x21 0x02
20:49:36 #26 CDR -1064 File Writer.cpp, Line 304
Invalid block address
20:49:36 #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
hopelijk weet er iemand iets .
1A23-0009-5030-1452-8119-1318
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 4:03:20
ahead WinASPI: File 'C:\programma\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 16:33:44
Nero API version: 6.3.1.20
Using interface version: 6.3.1.4
Installed in: C:\programma\ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <ATAPI DVD DUAL 8X4X12> Version: B3BC - HA 0 TA 1 - 6.3.1.20
Adapter driver: <atapi> HA 0
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP0802N atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVD DUAL 8X4X12 atapi Port 0 ID 1 DMA: On
DiskPeripheral : Maxtor 5T040H4 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AOPEN CD-RW CRW1232PRO atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
ATAPI DVD DUAL 8X4X12 F: CDRom0
AOPEN CD-RW CRW1232PRO G: CDRom1
AXV CD/DVD-ROM H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 182MB (186776kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
30.12.2004
NeroAPI
20:49:30 #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started
20:49:30 #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)
20:49:30 #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted
20:49:30 #4 Text 0 File Reader.cpp, Line 126
Reader running
20:49:30 #5 Text 0 File Writer.cpp, Line 124
Writer ATAPI DVD DUAL 8X4X12 running
20:49:30 #6 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
20:49:30 #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
20:49:31 #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
20:49:31 #9 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-At-Once, using DVD media
20:49:31 #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
20:49:31 #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO
20:49:31 #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: ATAPI DVD DUAL 8X4X12, Media type: DVD-R
Disc Manufacturer: OPTODI - SCK001
Disc Application Code: 64, Disc Physical Code: 193
20:49:31 #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
20:49:31 #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [ATAPI DVD DUAL 8X4X12 ]
--------------------------------------------------------------
20:49:31 #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [ATAPI DVD DUAL 8X4X12 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286128 | lead-out | 1 | 0x00 | 0x41
20:49:31 #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started
20:49:32 #17 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.
20:49:32 #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed
20:49:32 #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 2.4x (3.324 KB/s)
20:49:32 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
20:49:32 #21 Text 0 File DVDR.cpp, Line 1942
Recording mode: Sequential Recording Mode
20:49:32 #22 Text 0 File Mmc.cpp, Line 20531
Set BUFE: Seamless Link -> ON
20:49:32 #23 Text 0 File DVDR.cpp, Line 2083
Start write address at LBA 0
DVD high compatibility mode: Yes
20:49:32 #24 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
20:49:36 #25 SCSI -1064 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x01420000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x01 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x21 0x02
20:49:36 #26 CDR -1064 File Writer.cpp, Line 304
Invalid block address
20:49:36 #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
hopelijk weet er iemand iets .
- Status
Nieuwste berichten
-
-
-
-
apple agenda synchroniseren met google agenda
- Nieuwste: Opnieuw uitvogelen
