route99
Meubilair
- Lid geworden
- 5 aug 2017
- Berichten
- 7.876
- Besturingssysteem
- Windows & Linux
Hoofdstuk 2-11 in Engelse unique features pdf
En in de Engelse complete handleiding staat jouw tekst:
Dus die kun je aansluiten als je die LED-feestpartij wil laten draaien zoals beschreven boven aan?
Staat dus gewoon op de support site, die heb je iig wel kunnen vinden.
2-11 RGB Fusion
This application allows you to enable or specify the lighting mode of the onboard LEDs and rear panel
LEDs (Note 1) while in the Windows environment.
The RGB Fusion Interface
Using RGB Fusion
• The icon on the top right corner: Allows you to enable or disable the LED lighting.
The icon on the top right corner: Allows your computer to connect to the GIGABYTE RGB Fusion app
installed on your handheld devices. (Note 2)
• Basic (Note 3): Allows to you to configure the lighting behaviour of all LEDs/armor LEDs.
Pulse ─ All LEDs simultaneously fade in and fade out.
Music ─ All LEDs are synchronized with your music.
Color Cycle ─ All LEDs simultaneously cycle through a full spectrum of colors.
Static ─ All LEDs emit a single color.
Flash ─ All LEDs simultaneously flash on and off.
Random ─ Single LED regions flash randomly.
Wave ─ A full color spectrum cascades throughout the armor LED.
Double Flash ─ All LEDs flash in an interlaced pattern.
DEMO ─ The LEDs/digital LED strip cycle through a full spectrum of analog/digital colors.
En in de Engelse complete handleiding staat jouw tekst:
LED_C (RGB LED Strip Header) The header can be used to connect a standard 5050 RGB LED strip (12V/G/R/B), with maximum power rating of 2A (12V) and maximum length of 2m.
Pin No. Definition 1 12V 2 G 3 R 4 B
1
Connect your RGB LED strip to the header. The power pin (marked with a triangle on the plug) of the LED strip must be connected to Pin 1 (12V) of the digital LED strip header. Incorrect connection may lead to the damage of the LED strip.
RGB LED Strip
1
12V
DEBUG PORT
Before installing the devices, be sure to turn off the devices and your computer. Unplug the power cord from the power outlet to prevent damage to the devices
Dus die kun je aansluiten als je die LED-feestpartij wil laten draaien zoals beschreven boven aan?
Staat dus gewoon op de support site, die heb je iig wel kunnen vinden.