Ik heb een probleem met overklokken met m'n
4400+ x2
a8r32 mvp
melco 2x1gb pc3200 ddr sdram 3.0-3-3-8 @ 200mhz
2.5-3-3-7 @ 166mhz
2.0-2-2-6 @ 133 mhz
2x hd2900xt
draait standaard op 2.2, ben tot 2.534 gekomen, fsb 229, geen errors met prime, helaas als ik de fsb verhoog naar 230 heb ik na 5 min. errors, ik heb hier een print van m'n bios, ik hoop dat iemand wat advies heeft!:thumb:
ADVANCED
*Jumper Free Configuration
*AI Overclocking__________________Manual
*CPU Frequency__________________229
*PCIE Frequency_________________100
*FID/VID Change_________________Manual
*Processor Frequency Multiple______X11
*Processor Voltage_______________1.400 v
*DDR Voltage____________________auto
*VCORE Voltage_________________+200mV
*Northbridge Overvolt______________Enabled
* Core Voltage___________________1.20V
* HT Bus Voltage_________________1.30V
* PCIE Voltage___________________1.20V
*PEG Link Mode_________________disabled
*PEG Buffer Length_______________Auto
*AI Clock SkewA_________________Auto
*AI Clock SkewB_________________Auto
CPU Configuration
*GART Error Reporting____________Disabled
*MTR Mapping___________________Continuous
*Cool N Quiet____________________Disabled
*HT Link Speed__________________400 Mhz
*Memory Configuration
*Memory Timing Mode____________Limit
** Memclock Value_______________166 Mhz
*MCT Timing Mode_______________Auto
*MCT Extra Timing Mode__________Auto
*User Configuration Mode__________Auto
*Bank Interleaving_________________Auto
*Burst Length____________________4 Beats
*hardware Memory Hole____________Disabled
*ECC Configuration
** DRAM ECC Enable______________Disabled
** L2 Cache BG Scrub_____________Disabled
** Data Cache BG Scrub___________Disabled
Chipset
*VGA Priority___________________1st PCIE ->2nd PCIE
*HT Config
** HT Link Speed_________________400 Mhz
** CPU:RD580-NB HT Link Width____auto
** RD580 HT Link Three State_______Disabled
** RD580 HT Drive Strength_________auto
** HT Receiver Comp. Ctrl__________auto
** RD580 HT PLL Control___________auto
*PCI-E Configuration
** PCIE GFX1 Link Width___________X16
** PCIE GFX2 Link Width___________X16
** P2P Writes Between GFX Ports___Disabled
** 10% Extra Current Between GFX__Enabled
** 10% Extra Current Between GPP__Enabled
** 10% Extra Current Between SB___Enabled
** 10% Extra Current Between GFX1_Enabled
** 10% Extra Current Between GFX2_Enabled
4400+ x2
a8r32 mvp
melco 2x1gb pc3200 ddr sdram 3.0-3-3-8 @ 200mhz
2.5-3-3-7 @ 166mhz
2.0-2-2-6 @ 133 mhz
2x hd2900xt
draait standaard op 2.2, ben tot 2.534 gekomen, fsb 229, geen errors met prime, helaas als ik de fsb verhoog naar 230 heb ik na 5 min. errors, ik heb hier een print van m'n bios, ik hoop dat iemand wat advies heeft!:thumb:
ADVANCED
*Jumper Free Configuration
*AI Overclocking__________________Manual
*CPU Frequency__________________229
*PCIE Frequency_________________100
*FID/VID Change_________________Manual
*Processor Frequency Multiple______X11
*Processor Voltage_______________1.400 v
*DDR Voltage____________________auto
*VCORE Voltage_________________+200mV
*Northbridge Overvolt______________Enabled
* Core Voltage___________________1.20V
* HT Bus Voltage_________________1.30V
* PCIE Voltage___________________1.20V
*PEG Link Mode_________________disabled
*PEG Buffer Length_______________Auto
*AI Clock SkewA_________________Auto
*AI Clock SkewB_________________Auto
CPU Configuration
*GART Error Reporting____________Disabled
*MTR Mapping___________________Continuous
*Cool N Quiet____________________Disabled
*HT Link Speed__________________400 Mhz
*Memory Configuration
*Memory Timing Mode____________Limit
** Memclock Value_______________166 Mhz
*MCT Timing Mode_______________Auto
*MCT Extra Timing Mode__________Auto
*User Configuration Mode__________Auto
*Bank Interleaving_________________Auto
*Burst Length____________________4 Beats
*hardware Memory Hole____________Disabled
*ECC Configuration
** DRAM ECC Enable______________Disabled
** L2 Cache BG Scrub_____________Disabled
** Data Cache BG Scrub___________Disabled
Chipset
*VGA Priority___________________1st PCIE ->2nd PCIE
*HT Config
** HT Link Speed_________________400 Mhz
** CPU:RD580-NB HT Link Width____auto
** RD580 HT Link Three State_______Disabled
** RD580 HT Drive Strength_________auto
** HT Receiver Comp. Ctrl__________auto
** RD580 HT PLL Control___________auto
*PCI-E Configuration
** PCIE GFX1 Link Width___________X16
** PCIE GFX2 Link Width___________X16
** P2P Writes Between GFX Ports___Disabled
** 10% Extra Current Between GFX__Enabled
** 10% Extra Current Between GPP__Enabled
** 10% Extra Current Between SB___Enabled
** 10% Extra Current Between GFX1_Enabled
** 10% Extra Current Between GFX2_Enabled
Laatst bewerkt:
