bitlord port forward

Status
Niet open voor verdere reacties.

coolsnarf

Gebruiker
Lid geworden
7 sep 2004
Berichten
99
Hoi,

ik wil op een e-tech router een port forwarde voor bitlord, maar nu moet je ook iets van een portmap invullen? Wat is dit?

ik heb al geprobeerd om het ip adres in te vullen, maar dat werkt niet

Frans
 
daar had ik al gekeken, maar de goede router/router setup staat er niet bij.
Het forwarden opzich is niet het probleem, maar echt het item van de port map waar ik dus niet weet wat ik in moet vullen
 
Laatst bewerkt:
het etech router model is volgens mij (wat er op de doos staat) ADWG02
 
Ik kan niets vinden over het forwarden van poorten maar het volgende is te vinden op de website:
To got the best speed, BitLord need a public listening port as other p2p applications do. But if you are behind a DSL router or use Windows Internet Connection Sharing (ICS), you need manually config a port mapping (a port forwarding from gateway/router to your computer). It is usually a boring task. BitLord takes advantage of the UPnP technology as what MSN Messenger does, it will automatically config the port mapping for you as soon as the download task begins. Please note that: UPnP is only supported in Windows XP or above, and your hardware router must support UPnP and enable it, too. By default, BitLord won't release the portmapping when exit. You may config it in Options->Advanced->Connections Dialogs.
Without any cofiguration, BitLord will auto dectect your internet connection ( to find out if you are behind the NAT or haven't any successful port-mapping ) and did all those automatically. But you may also enable or disable this feature in the Options - Advanced dialog.
Ik zou zeggen, probeer gewoon eens verbinding te maken. :)
 
mmmm, ik heb het gezien en denk inderdaad dat t dan vanzelf gaat. Maar de downloads blijven traag, zelfs bij veel seeds. Zou t ook wat anders kunnen zijn dan?
 
Status
Niet open voor verdere reacties.

Nieuwste berichten

Terug
Bovenaan Onderaan