brandproces mislukt

Marylaine · 13 apr 2005

kan iemand mij helpen?

ik krijg steeds een foutmelding.

Branden lukt tot ongeveer 90% en dan gaat het mis.

Marylaine

Marylaine · 13 apr 2005

sWindows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26-10-2004 17:35:34
Nero-versie: 6.6.0.2 (Nero Express)
Recorder: <SONY DVD RW DRU-720A> Versie: JY02 - HA 1 TA 1 - 6.6.0.2
Adapter-stuurprogramma:<atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD_RW ND-2500A >Versie: 1.0A - HA 1 TA 0 - 6.6.0.2
Adapter-stuurprogramma:<atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-720A atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
_NEC DVD_RW ND-2500A E: CDRom0
SONY DVD RW DRU-720A F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 36700160 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 223MB (228896kB)
Free physical memory: 67MB (69212kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.4.2005
DVD snelkopiëren (on-the-fly)
13:13:36 #1 Text 0 File Reader.cpp, Line 127
Reader running

13:13:36 #2 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-720A running

13:13:36 #3 Text 0 File DVDCopy.cpp, Line 267
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2268544 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)

13:13:36 #4 Text 0 File DVDCopy.cpp, Line 370
Max -1 tracks of 1 allowed to copy
1: 0 - 2268544 = 2268544, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

13:13:36 #5 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media

13:13:37 #6 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2268543 (504:07.18, 4430MB)

13:13:37 #7 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

13:13:37 #8 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: SONY DVD RW DRU-720A, Media type: DVD+RW
Disc Manufacturer ID: PHILIPS, Media Type ID: 041, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1

13:13:37 #9 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

13:13:37 #10 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (modus 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2268544 (2268544) = #2268544/504:7.19
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2268544 blocks [SONY DVD RW DRU-720A]
--------------------------------------------------------------

13:13:37 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [SONY DVD RW DRU-720A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4645978112, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2268544 | lead-out | 1 | 0x00 | 0x41

13:13:37 #12 Phase 36 File dlgbrnst.cpp, Line 1832
Begin brandproces met 4x (5.540 kB/sec)

13:13:38 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2568
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

13:13:38 #14 Text 0 File Cdrdrv.cpp, Line 8310
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: PHILIPS.
Media type ID: 041
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 50 48 49 4C 49 - 50 53 00 30 34 31 00 39 ...PHILIPS.041.9
23 00 9F 7C 5C 02 28 00 - 9A 7E 70 02 28 00 A0 7B #..|\.(..~p.(..{
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............

13:13:38 #15 CDR -1207 File DVDR.cpp, Line 4780
Boektype automatisch instellen op: Huidige recorder-instelling

13:13:38 #16 Text 0 File DVDPlusRW.cpp, Line 606
Start write address at LBA 0
DVD high compatibility mode: Yes

13:26:07 #17 SCSI -1128 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x074E7000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x1E 0x93 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x1E 0x93 0xE0 0x0A
0x00 0x00 0x00 0x00 0x11 0x00

13:26:07 #18 TRANSFER -25 File Reader.cpp, Line 382
Fout tijdens lezen data

13:26:07 #19 Text 0 File Reader.cpp, Line 385
Exception value: -1128

13:26:13 #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

13:26:14 #21 Text 0 File DVDR.cpp, Line 5291
Drive: SONY DVD RW DRU-720A
Book Type request: DVD+RW
Changing the Book Type was finished successfully, return code 0

13:26:14 #22 Phase 38 File dlgbrnst.cpp, Line 1832
Brandproces mislukt met 4x (5.540 kB/sec)

Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 11, 1, size=99456 bytes, created 3-1-2005 11:33:44 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 11, 1, size=28928 bytes, created 3-1-2005 11:33:24 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 11, 1, size=8704 bytes, created 3-1-2005 11:33:46 (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4-8-2004 14:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Sorry ging iets mis.

lamp · 13 apr 2005

eerst een heel simpele oplossing upgrade eens je nero.
je kan gratis upgraden naar de laatste versie als je een nero 6.6 hebt
dus je kan een 6.6.0.8 nemen op www.nero.com

m@ikel · 13 apr 2005

Hallo,

als je gaat branden moet je er wel voor zorgen dat je niet te veel dingen tegelijk gaat zitten doen. Anders kan je brandproces mislukken zoals in jou geval. Of haal anders nero er is helemaal af en zet hem er dan weer op.

Gr,

Maikel

Elisa · 13 apr 2005

Wat mij opviel waren al die InCd drivers.
Kan Windows tegenwoordig wel goed omgaan met Incd?

jackall · 13 apr 2005

2 branders???
Probeer eens de on the fly copy eens om te draaien.
Aan het schijfje zal het waarschijnlijk niet liggen.
En idd te veel bezig zijn op de achtergrond tijdens het copieren is niet echt bevoordelijk voor de brandprestaties.
On the fly kan ook problemen krijgen als beide branders/spelers op dezelfde ide kabel zijn aangesloten.

Marylaine · 13 apr 2005

on the fly copy omdraaien, hoe doe ik dat?

Elisa · 13 apr 2005

Dat doe je door een lege cd in de brander te leggen en het origineel in de cdrom.
Nu voor kopieren kiezen.
Het betekent zoiets als direct overnemen zonder dat er eerst bestanden op de harde schrijf worden gezet.

Eerlijk gezegd..........dit lijkt me alleen maar meer belasting geven.

Wat ik vooral raar vind zijn die InCd drivers.
Gebruik je dat programma? Het is branden op de manier zoals je vroeger een bestandje naar je floppy sleepte.
Als je het niet gebruikt ga dan eens naar
start/uitvoeren/msconfig en kijk of je daar die INCD ziet staan. Haal even het vinkje weg.

Heb je trouwens Windows XP?

Marylaine · 20 apr 2005

hallo, hier ben ik weer. computer is een week in de reparatie geweest, is vorige week gecrasht bij het branden van een DVD. Zou nu gemaakt moeten zijn maar helaas, ik heb zojuist geprobeerd weer te branden maar tevergeefs. doet weer niks. Nero is wel geupload naar 6.6.0.1 en daar ben ik ook niks mee opgeschoten. In msconfig kom ik geen incd tegen om uit te vinken. misschien kan iemand wijs uit de foutmelding die ik nu gekregen heb.

groetjes,

Marylaine · 20 apr 2005

sorry gaat weer mis met bijvoegen. komt ie nog een k

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26-10-2004 18:35:34
Nero Version: 6.6.0.12
Internal Version: 6, 6, 0, 12c
(Nero Express)
Recorder: <_NEC DVD_RW ND-2500A> Version: 1.0A - HA 1 TA 1 - 6.6.0.12
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SAMSUNG CDRW/DVD SM-352B>Version: T809 - HA 1 TA 0 - 6.6.0.12
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CDRW/DVD SM-352B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
SAMSUNG CDRW/DVD SM-352B E: CDRom0
_NEC DVD_RW ND-2500A F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 36700160 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 223MB (228896kB)
Free physical memory: 127MB (130352kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.4.2005
===== Disc-Copy over image - 1st step : Copy to image ...

18:03:34 #1 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xBB 0x00 0xFF 0xFF 0xFF 0xFF 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

18:03:34 #2 Text 0 File Reader.cpp, Line 127
Reader running

18:03:34 #3 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running

18:03:34 #4 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2268543 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

18:03:34 #5 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 2268543 = 2268543, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

18:03:34 #6 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

18:03:34 #7 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2621439 (582:32.39, 5119MB)
Last address to be written: 2268542 (504:07.17, 4430MB)

18:03:34 #8 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

18:03:34 #9 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

18:03:34 #10 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

18:03:34 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2268543 (2268543) = #2268543/504:7.18
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2268543 blocks [Image Recorder]
--------------------------------------------------------------

18:03:34 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4645976064, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2268543 | lead-out | 1 | 0x41 | 0x00

18:03:34 #13 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning

18:03:35 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

18:11:54 #15 SCSI -1047 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06EC1000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x11 0xEF 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x64 0x00

18:11:54 #16 TRANSFER -25 File Reader.cpp, Line 382
Error reading data

18:11:54 #17 Text 0 File Reader.cpp, Line 385
Exception value: -1047

18:11:54 #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

18:11:56 #19 Phase 22 File dlgbrnst.cpp, Line 1832
Reading disc failed

===== Disc-Copy over image - 2nd step : Burn the image ...

18:03:34 #1 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xBB 0x00 0xFF 0xFF 0xFF 0xFF 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

18:03:34 #2 Text 0 File Reader.cpp, Line 127
Reader running

18:03:34 #3 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running

18:03:34 #4 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2268543 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

18:03:34 #5 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 2268543 = 2268543, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

18:03:34 #6 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

18:03:34 #7 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2621439 (582:32.39, 5119MB)
Last address to be written: 2268542 (504:07.17, 4430MB)

18:03:34 #8 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

18:03:34 #9 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

18:03:34 #10 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

18:03:34 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2268543 (2268543) = #2268543/504:7.18
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2268543 blocks [Image Recorder]
--------------------------------------------------------------

18:03:34 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4645976064, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2268543 | lead-out | 1 | 0x41 | 0x00

18:03:34 #13 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning

18:03:35 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

18:11:54 #15 SCSI -1047 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06EC1000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x11 0xEF 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x64 0x00

18:11:54 #16 TRANSFER -25 File Reader.cpp, Line 382
Error reading data

18:11:54 #17 Text 0 File Reader.cpp, Line 385
Exception value: -1047

18:11:54 #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

18:11:56 #19 Phase 22 File dlgbrnst.cpp, Line 1832
Reading disc failed

Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 11, 1, size=99456 bytes, created 3-1-2005 11:33:44 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 11, 1, size=28928 bytes, created 3-1-2005 11:33:24 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 11, 1, size=8704 bytes, created 3-1-2005 11:33:46 (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4-8-2004 14:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

eer.

Marylaine · 20 apr 2005

Als ik het goed begrijp kan ik de InCD drivers beter weggooien? Hoe doe ik dat?

Elisa · 21 apr 2005

Nou, kijk eerst maar eens in msconfig. Als je iets hebt van InCd of NeroInCd kunnen we het tijdelijk stopzetten.
start/uitvoeren/msconfig intypen/ga naar opstarten.
Als je duidelijk iets ziet van InCd dan haal je het vinkje weg. Twijfel je dan maak je even een screenprint.

Marylaine · 21 apr 2005

in msconfig is niets te vinden

groetjes

Elisa · 21 apr 2005

Toch denk ik dat het in die hoek zit.
Er moet een onderdeel in Nero zitten dat InCd heet.
Kijk eens bij je programma's (via programma toegang)
en anders via de site van Nero. Er moet een remove-tool zijn.
Nero has a tool that will remove InCD. That app interferes and should be removed before doing anything else.

Ik heb het al
Remove tool

Marylaine · 21 apr 2005

Helaas, inCD drivers zijn verwijderd, maar hij blijft een foutmelding geven; onderstaand de nieuwe log.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26-10-2004 18:35:34
Nero Version: 6.6.0.12
Internal Version: 6, 6, 0, 12c
(Nero Express)
Recorder: <_NEC DVD_RW ND-2500A> Version: 1.0A - HA 1 TA 1 - 6.6.0.12
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SAMSUNG CDRW/DVD SM-352B>Version: T809 - HA 1 TA 0 - 6.6.0.12
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CDRW/DVD SM-352B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
SAMSUNG CDRW/DVD SM-352B E: CDRom0
_NEC DVD_RW ND-2500A F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 36700160 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 223MB (228896kB)
Free physical memory: 158MB (162000kB)
Memory in use : 29 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.4.2005
===== Disc-Copy over image - 1st step : Copy to image ...

18:31:46 #1 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xBB 0x00 0xFF 0xFF 0xFF 0xFF 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

18:31:46 #2 Text 0 File Reader.cpp, Line 127
Reader running

18:31:46 #3 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running

18:31:46 #4 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2268543 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

18:31:46 #5 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 2268543 = 2268543, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

18:31:46 #6 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

18:31:47 #7 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2621439 (582:32.39, 5119MB)
Last address to be written: 2268542 (504:07.17, 4430MB)

18:31:47 #8 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

18:31:47 #9 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

18:31:47 #10 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

18:31:47 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2268543 (2268543) = #2268543/504:7.18
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2268543 blocks [Image Recorder]
--------------------------------------------------------------

18:31:47 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4645976064, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2268543 | lead-out | 1 | 0x41 | 0x00

18:31:47 #13 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning

18:31:47 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

18:40:10 #15 SCSI -1047 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06DE1000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x11 0xEF 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x64 0x00

18:40:11 #16 TRANSFER -25 File Reader.cpp, Line 382
Error reading data

18:40:21 #17 Text 0 File Reader.cpp, Line 385
Exception value: -1047

18:40:24 #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

18:40:25 #19 Phase 22 File dlgbrnst.cpp, Line 1832
Reading disc failed

===== Disc-Copy over image - 2nd step : Burn the image ...

18:31:46 #1 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xBB 0x00 0xFF 0xFF 0xFF 0xFF 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

18:31:46 #2 Text 0 File Reader.cpp, Line 127
Reader running

18:31:46 #3 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running

18:31:46 #4 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2268543 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

18:31:46 #5 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 2268543 = 2268543, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

18:31:46 #6 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

18:31:47 #7 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2621439 (582:32.39, 5119MB)
Last address to be written: 2268542 (504:07.17, 4430MB)

18:31:47 #8 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

18:31:47 #9 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

18:31:47 #10 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

18:31:47 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2268543 (2268543) = #2268543/504:7.18
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2268543 blocks [Image Recorder]
--------------------------------------------------------------

18:31:47 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4645976064, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2268543 | lead-out | 1 | 0x41 | 0x00

18:31:47 #13 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning

18:31:47 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

18:40:10 #15 SCSI -1047 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06DE1000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x11 0xEF 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x64 0x00

18:40:11 #16 TRANSFER -25 File Reader.cpp, Line 382
Error reading data

18:40:21 #17 Text 0 File Reader.cpp, Line 385
Exception value: -1047

18:40:24 #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

18:40:25 #19 Phase 22 File dlgbrnst.cpp, Line 1832
Reading disc failed

Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4-8-2004 14:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

utmelding geven. onderstaand de nieuwe log.

Elisa · 21 apr 2005

Eerlijk gezegd....die techniek is voor mij ook alcadabra.
Maar nu zag ik ook dit:
18:11:56 #19 Phase 22 File dlgbrnst.cpp, Line 1832
Reading disc failed

En ik zag meer reading problemen.
Probeer je 'on te fly' te kopieren?
Dus rechtstreeks van de cd/dvd-rom naar de brander?

Marylaine · 21 apr 2005

heb alletwee de manieren al geprobeerd maar krijg steeds een foutmelding.

Bugs Bunny · 21 apr 2005

Misschien wat extra (atapi) drivers downloaden?

Je krijgt vaak de melding: illegal request. Is dat DVD beveiligd?

Elisa · 21 apr 2005

heb alletwee de manieren al geprobeerd maar krijg steeds een foutmelding.
Het gaat er mij meer om dat je brander niet eens de kans krijgt om te lezen.
Kijk eens of die cd/dvd goed schoon is.

Marylaine · 22 apr 2005

Ik ben ermee gestopt; niets wat ik probeer lukt.
Er is geen een film, beveiligd of niet, die ik kan kopieren.
DVD's zijn ook niet vuil of beschadigd, dus de prullenbak ermee in met de brander.

groetjes, Marylaine

brandproces mislukt

Gebruiker

Bijlagen

Gebruiker

Terugkerende gebruiker

Gebruiker

Inventaris

Moderator

Gebruiker

Inventaris

Gebruiker

Bijlagen

Gebruiker

Gebruiker

Inventaris

Gebruiker

Inventaris

Gebruiker

Inventaris

Gebruiker

Gebruiker

Inventaris

Gebruiker

Wij waarderen jouw privacy