manamana
Inventaris
- Lid geworden
- 30 aug 2011
- Berichten
- 15.146
Canon MP560 krijg ik niet geinstalleerd
- Onderwerp starter stephan70
- Startdatum
- Status
Ennnn... hier ben ik weer! Was er even af, maar ben jullie niet vergeten hoor!
Ben even verder wezen graven en de printer is nog niet goed.
Boven op de pc (windows7 64 bit) van mijn zoon krijg ik de printer WEL geinstalleerd, maar op mijn laptop met vista 32bit dus niet.
Weet iemand hoe ik de mp driver (nieuwste 1.05 van Canon) op mijn laptop wel geinstalleerd krijg? Blijkt dus dat het aan mijn pc software ligt en NIET aan de printer, leuk he? pfffff
Ben even verder wezen graven en de printer is nog niet goed.
Boven op de pc (windows7 64 bit) van mijn zoon krijg ik de printer WEL geinstalleerd, maar op mijn laptop met vista 32bit dus niet.
Weet iemand hoe ik de mp driver (nieuwste 1.05 van Canon) op mijn laptop wel geinstalleerd krijg? Blijkt dus dat het aan mijn pc software ligt en NIET aan de printer, leuk he? pfffff
michelvalk
Nieuwe gebruiker
- Lid geworden
- 16 dec 2011
- Berichten
- 1
Probleem "de nieuwe poort is niet gemaakt :0000 " opgelost
Stephan, ik had exact dezelfde foutmelding bij installatie van mijn canon MG5250 (na het terugzetten van een backup). Ik heb het probleem opgelost mbv de oplossing zoals vermeld op onderstaande link (of zoek in Google op "new port could not be created"):
http://answers.microsoft.com/en-us/...ated0000/6e0e6283-17fb-475a-9011-106a944dfe6f
Hieronder stapsgewijs de oplossing, in dit geval beschreven voor een PIXMA MX340, maar het werkte bij mij ook voor de MG5250:
Uninstalling and reinstalling the network port and printer driver should
resolve this issue. To perform the uninstall, please have the PIXMA
MX340's CDROM in the CDROM drive and then follow these steps:
1. Click on Start and then Run.
2. Click Browse. In the browse window, on the left hand side in the
row of big icons, click on My Computer.
3. In the window to the right, double click the printer CDROM named
CANON_IJ.
4. Double click the folder named WIN.
5. Double click the folders named Driver and then DrvSetup.
6. Double click the file named DELDRV. In the Run box click ok.
7. Click Execute to start uninstall and Yes to completely uninstall
the drivers.
8. Once finished, click on Start and then Run.
9. Click Browse. In the browse window, on the left hand side in the
row of big icons, click on My Computer.
10. In the window to the right, double click the printer CDROM named
CANON_IJ.
11. Double click the folders named WIN, DRIVER and then LAN.
12. Double click the file named CNMNPU.exe
13. In the Run box click OK and then Yes on the Delete BJNP Port
window.
14. The uninstaller will prompt you to restart the computer, please
click Yes to restart the computer.
Once the printer has been uninstalled, restart the computer.
When the computer restarts, please make sure to disable any firewall or
anti-spyware programs currently installed. Then we will reinstall. To
do so, please follow these steps:
1. Turn your PIXMA MX340 off.
2. Insert the CDROM that came with the unit. The setup program will
start automatically.
3. If the Autoplay screen appears, click Run and then Continue.
4. Click on Custom Install.
5. When the Custom Install screen appears, Check the MP Drivers/MX340
Drivers and the Canon IJ Network Tool.
6. Read the License Agreement carefully and click Yes if you agree.
7. When the Setup Method appears, choose Printer is already connected
to the network.
8. Click Next.
9. When the Printer Connection screen appears, connect the PIXMA MX340
to the computer using the USB cable and turn on the PIXMA MX340.
10. Click Next on the Setup Preparations screen.
11. When the Access Points screen appears, select an access point to
use and then click Connect.
12. If the Set Printer IP Address screen appears, click Connect.
13. If the Network Setup of Card Slot window appears, click Next.
14. When the Setup Completion dialog box appears, disconnect the USB
cable and then click Next.
15. On the Connection Performance Measurement screen, click Next.
16. Confirm the results and then click Finish to complete the
installation.
Succes,
Michel
Stephan, ik had exact dezelfde foutmelding bij installatie van mijn canon MG5250 (na het terugzetten van een backup). Ik heb het probleem opgelost mbv de oplossing zoals vermeld op onderstaande link (of zoek in Google op "new port could not be created"):
http://answers.microsoft.com/en-us/...ated0000/6e0e6283-17fb-475a-9011-106a944dfe6f
Hieronder stapsgewijs de oplossing, in dit geval beschreven voor een PIXMA MX340, maar het werkte bij mij ook voor de MG5250:
Uninstalling and reinstalling the network port and printer driver should
resolve this issue. To perform the uninstall, please have the PIXMA
MX340's CDROM in the CDROM drive and then follow these steps:
1. Click on Start and then Run.
2. Click Browse. In the browse window, on the left hand side in the
row of big icons, click on My Computer.
3. In the window to the right, double click the printer CDROM named
CANON_IJ.
4. Double click the folder named WIN.
5. Double click the folders named Driver and then DrvSetup.
6. Double click the file named DELDRV. In the Run box click ok.
7. Click Execute to start uninstall and Yes to completely uninstall
the drivers.
8. Once finished, click on Start and then Run.
9. Click Browse. In the browse window, on the left hand side in the
row of big icons, click on My Computer.
10. In the window to the right, double click the printer CDROM named
CANON_IJ.
11. Double click the folders named WIN, DRIVER and then LAN.
12. Double click the file named CNMNPU.exe
13. In the Run box click OK and then Yes on the Delete BJNP Port
window.
14. The uninstaller will prompt you to restart the computer, please
click Yes to restart the computer.
Once the printer has been uninstalled, restart the computer.
When the computer restarts, please make sure to disable any firewall or
anti-spyware programs currently installed. Then we will reinstall. To
do so, please follow these steps:
1. Turn your PIXMA MX340 off.
2. Insert the CDROM that came with the unit. The setup program will
start automatically.
3. If the Autoplay screen appears, click Run and then Continue.
4. Click on Custom Install.
5. When the Custom Install screen appears, Check the MP Drivers/MX340
Drivers and the Canon IJ Network Tool.
6. Read the License Agreement carefully and click Yes if you agree.
7. When the Setup Method appears, choose Printer is already connected
to the network.
8. Click Next.
9. When the Printer Connection screen appears, connect the PIXMA MX340
to the computer using the USB cable and turn on the PIXMA MX340.
10. Click Next on the Setup Preparations screen.
11. When the Access Points screen appears, select an access point to
use and then click Connect.
12. If the Set Printer IP Address screen appears, click Connect.
13. If the Network Setup of Card Slot window appears, click Next.
14. When the Setup Completion dialog box appears, disconnect the USB
cable and then click Next.
15. On the Connection Performance Measurement screen, click Next.
16. Confirm the results and then click Finish to complete the
installation.
Succes,
Michel
- Status
