CD branden gaat niet!!

Status
Niet open voor verdere reacties.

knarfje

Gebruiker
Lid geworden
12 mrt 2001
Berichten
817
Hallo.

Ik wil een cd fikken en hij komt niet verder dan 8%.

heb al een andere brander gebuikt en andere software maar zonder resultaat.
Wat kan er hier nou aan mis gaan??
 
Wat krijg je voor foutmelding?
Wat voor versie windows?
Wat zijn de specs van je cd-rom ?

kortom, meer info graag.
 
een philips cd rom en een Aopen cd-rom geprobeerd.
Diverse verschillende schijfjes.
Windows xp pro.

geen foutmelding hieronder wel een log van nero.

Nero blijft wel op 8% hangen.

Nero log:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\Programma`s\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26-10-2004 18:35:34
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c

Recorder: <PHILIPS CDD4851 CD-R/RW> Version: C3.7 - HA 0 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 0
Drive buffer : 4096kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PHILIPS CDD4851 CD-R/RW >Version: C3.7 - HA 0 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800JB-00ETA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS CDD4851 CD-R/RW atapi Port 0 ID 1 DMA: On

=== CDRom-Device-Map ===
PHILIPS CDD4851 CD-R/RW F: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 446MB (457516kB)
Free physical memory: 117MB (120240kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

23.6.2005
Audio-CD
9:30:07 #1 CDADOC -1 File Cdadoc.cpp, Line 1465
Audio item log info:
Audio document burn settings:
=============================
Burn mode: DAO,
CD Text: On,
Cache disk or network files: No,
Cache small files: No,
Cache files smaller than 65536 bytes.
Audio Multisession: No
List of audio tracks:
=====================
Track 01: Length: 04:04.44, Pause frames: 150, Filters: 0, Name: '01 Nummer 1.wma'.
Track 02: Length: 03:05.44, Pause frames: 150, Filters: 0, Name: '02 Nummer 2.wma'.
Track 03: Length: 04:30.57, Pause frames: 150, Filters: 0, Name: '03 Nummer 3.wma'.
Track 04: Length: 04:16.42, Pause frames: 150, Filters: 0, Name: '04 Nummer 4.wma'.
Track 05: Length: 03:05.41, Pause frames: 150, Filters: 0, Name: '05 Nummer 5.wma'.
Track 06: Length: 03:58.64, Pause frames: 150, Filters: 0, Name: '06 Nummer 6.wma'.
Track 07: Length: 03:11.67, Pause frames: 150, Filters: 0, Name: '07 Nummer 7.wma'.
Track 08: Length: 02:49.49, Pause frames: 150, Filters: 0, Name: '08 Nummer 8.wma'.
Track 09: Length: 04:06.69, Pause frames: 150, Filters: 0, Name: '09 Nummer 9.wma'.
Track 10: Length: 03:52.34, Pause frames: 150, Filters: 0, Name: '10 Nummer 10.wma'.
Track 11: Length: 03:14.51, Pause frames: 150, Filters: 0, Name: '11 Nummer 11.wma'.
Total size: 40:39.37

9:30:07 #2 Text 0 File Burncd.cpp, Line 2882
PHILIPS CDD4851 CD-R/RW
Seamless Link geactiveerd

9:30:07 #3 Text 0 File Reader.cpp, Line 127
Reader running

9:30:07 #4 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

9:30:07 #5 Text 0 File Writer.cpp, Line 122
Writer PHILIPS CDD4851 CD-R/RW running

9:30:07 #6 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using CD-R/RW media

9:30:07 #7 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 182811 ( 40:39.36)

9:30:07 #8 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

9:30:07 #9 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PHILIPS CDD4851 CD-R/RW;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

9:30:07 #10 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:30:07 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_AUDIO_NOPRE (01 Nummer 1.wma)
2 indices, index0 (150) not provided
original disc pos #0 + 18344 (18344) = #18344/4:4.44
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW_NOPRE, 2368, config 0, wanted index0 0 blocks, length 18344 blocks [PHILIPS CDD4851 CD-R/RW]
1: TRM_AUDIO_NOPRE (02 Nummer 2.wma)
2 indices, index0 (150) not provided
original disc pos #0 + 13919 (13919) = #13919/3:5.44
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW_NOPRE, 2368, config 0, wanted index0 0 blocks, length 13919 blocks [PHILIPS CDD4851 CD-R/RW]
2: TRM_AUDIO_NOPRE (03 Nummer 3.wma)
2 indices, index0 (150) not provided
original disc pos #0 + 20307 (20307) = #20307/4:30.57
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW_NOPRE, 2368, config 0, wanted index0 0 blocks, length 20307 blocks [PHILIPS CDD4851 CD-R/RW]
3: TRM_AUDIO_NOPRE (04 Nummer 4.wma)
2 indices, index0 (150) not provided
original disc pos #0 + 19242 (19242) = #19242/4:16.42
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW_NOPRE, 2368, config 0, wanted index0 0 blocks, length 19242 blocks [PHILIPS CDD4851 CD-R/RW]
4: TRM_AUDIO_NOPRE (05 Nummer 5.wma)
2 indices, index0 (150) not provided
original disc pos #0 + 13916 (13916) = #13916/3:5.41
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW_NOPRE, 2368, config 0, wanted index0 0 blocks, length 13916 blocks [PHILIPS CDD4851 CD-R/RW]
5: TRM_AUDIO_NOPRE (06 Nummer 6.wma)
2 indices, index0 (150) not provided
original disc pos #0 + 17914 (17914) = #17914/3:58.64
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW_NOPRE, 2368, config 0, wanted index0 0 blocks, length 17914 blocks [PHILIPS CDD4851 CD-R/RW]
6: TRM_AUDIO_NOPRE (07 Nummer 7.wma)
2 indices, index0 (150) not provided
original disc pos #0 + 14392 (14392) = #14392/3:11.67
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW_NOPRE, 2368, config 0, wanted index0 0 blocks, length 14392 blocks [PHILIPS CDD4851 CD-R/RW]
7: TRM_AUDIO_NOPRE (08 Nummer 8.wma)
2 indices, index0 (150) not provided
original disc pos #0 + 12724 (12724) = #12724/2:49.49
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW_NOPRE, 2368, config 0, wanted index0 0 blocks, length 12724 blocks [PHILIPS CDD4851 CD-R/RW]
8: TRM_AUDIO_NOPRE (09 Nummer 9.wma)
2 indices, index0 (150) not provided
original disc pos #0 + 18519 (18519) = #18519/4:6.69
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW_NOPRE, 2368, config 0, wanted index0 0 blocks, length 18519 blocks [PHILIPS CDD4851 CD-R/RW]
9: TRM_AUDIO_NOPRE (10 Nummer 10.wma)
2 indices, index0 (150) not provided
original disc pos #0 + 17434 (17434) = #17434/3:52.34
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW_NOPRE, 2368, config 0, wanted index0 0 blocks, length 17434 blocks [PHILIPS CDD4851 CD-R/RW]
10: TRM_AUDIO_NOPRE (11 Nummer 11.wma)
2 indices, index0 (150) not provided
original disc pos #0 + 14601 (14601) = #14601/3:14.51
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW_NOPRE, 2368, config 0, wanted index0 0 blocks, length 14601 blocks [PHILIPS CDD4851 CD-R/RW]
--------------------------------------------------------------

9:30:07 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PHILIPS CDD4851 CD-R/RW] for write in raw writing
DAO infos:
==========
MCN: " "
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 11:
1: TRM_AUDIO_ULTRARAW_NOPRE, 2368/0x00, FilePos 0 355200 43793792, ISRC ""
2: TRM_AUDIO_ULTRARAW_NOPRE, 2368/0x00, FilePos 43793792 44148992 77109184, ISRC ""
3: TRM_AUDIO_ULTRARAW_NOPRE, 2368/0x00, FilePos 77109184 77464384 125551360, ISRC ""
4: TRM_AUDIO_ULTRARAW_NOPRE, 2368/0x00, FilePos 125551360 125906560 171471616, ISRC ""
5: TRM_AUDIO_ULTRARAW_NOPRE, 2368/0x00, FilePos 171471616 171826816 204779904, ISRC ""
6: TRM_AUDIO_ULTRARAW_NOPRE, 2368/0x00, FilePos 204779904 205135104 247555456, ISRC ""
7: TRM_AUDIO_ULTRARAW_NOPRE, 2368/0x00, FilePos 247555456 247910656 281990912, ISRC ""
8: TRM_AUDIO_ULTRARAW_NOPRE, 2368/0x00, FilePos 281990912 282346112 312476544, ISRC ""
9: TRM_AUDIO_ULTRARAW_NOPRE, 2368/0x00, FilePos 312476544 312831744 356684736, ISRC ""
10: TRM_AUDIO_ULTRARAW_NOPRE, 2368/0x00, FilePos 356684736 357039936 398323648, ISRC ""
11: TRM_AUDIO_ULTRARAW_NOPRE, 2368/0x00, FilePos 398323648 398678848 433254016, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x01 | 0x00
-150 | 1 | 0 | 0x21 | 0x00
0 | 1 | 1 | 0x21 | 0x00
18344 | 2 | 0 | 0x21 | 0x00
18494 | 2 | 1 | 0x21 | 0x00
32413 | 3 | 0 | 0x21 | 0x00
32563 | 3 | 1 | 0x21 | 0x00
52870 | 4 | 0 | 0x21 | 0x00
53020 | 4 | 1 | 0x21 | 0x00
72262 | 5 | 0 | 0x21 | 0x00
72412 | 5 | 1 | 0x21 | 0x00
86328 | 6 | 0 | 0x21 | 0x00
86478 | 6 | 1 | 0x21 | 0x00
104392 | 7 | 0 | 0x21 | 0x00
104542 | 7 | 1 | 0x21 | 0x00
118934 | 8 | 0 | 0x21 | 0x00
119084 | 8 | 1 | 0x21 | 0x00
131808 | 9 | 0 | 0x21 | 0x00
131958 | 9 | 1 | 0x21 | 0x00
150477 | 10 | 0 | 0x21 | 0x00
150627 | 10 | 1 | 0x21 | 0x00
168061 | 11 | 0 | 0x21 | 0x00
168211 | 11 | 1 | 0x21 | 0x00
182812 | lead-out | 1 | 0x01 | 0x00

9:30:07 #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 12x (1.800 kB/sec)

9:30:07 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

9:30:07 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #18494

9:30:07 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #0): write at #32563

9:30:07 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 3 (relocatable, no disc pos, no patch infos, orig at #0): write at #53020

9:30:07 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 4 (relocatable, no disc pos, no patch infos, orig at #0): write at #72412

9:30:07 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 5 (relocatable, no disc pos, no patch infos, orig at #0): write at #86478

9:30:07 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 6 (relocatable, no disc pos, no patch infos, orig at #0): write at #104542

9:30:07 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 7 (relocatable, no disc pos, no patch infos, orig at #0): write at #119084

9:30:07 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 8 (relocatable, no disc pos, no patch infos, orig at #0): write at #131958

9:30:07 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 9 (relocatable, no disc pos, no patch infos, orig at #0): write at #150627

9:30:07 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 10 (relocatable, no disc pos, no patch infos, orig at #0): write at #168211

9:30:07 #25 Text 0 File Mmc.cpp, Line 16689
StartDAO : CD-Text - On

9:30:07 #26 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Seamless Link -> ON

9:31:30 #27 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x04280000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0xFF 0xFF 0xD8 0xAC 0x00 0x00 0x1B 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x13
0x00 0x00 0x00 0x00 0x73 0x03

9:31:30 #28 CDR -1106 File Writer.cpp, Line 311
Power calibration error

9:31:30 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

9:31:30 #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

9:31:33 #31 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 12x (1.800 kB/sec)

9:31:33 #32 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

9:31:33 #33 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 3-8-2004 22:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
 
indien je servicepack 2 heb, kun je als je nog niet geupdated hebt problemen ondervinden.
Mij nero deed ook alles behalve een degelijke cd schrijven.
Tot ik de update deed...nu bolt ie als een tiet.

de 'update 'is te vinden op de nero website.
(Packet Writing Problem with Windows XP Service Pack 2 is op de nero site te lezen.)

Bij wma inderdaad pluginnen, zoals eeder opgemerkt.
 
Laatst bewerkt:
Geplaatst door nomis
indien je servicepack 2 heb, kun je als je nog niet geupdated hebt problemen ondervinden.
Mij nero deed ook alles behalve een degelijke cd schrijven.
Tot ik de update deed...nu bolt ie als een tiet.

de 'update 'is te vinden op de nero website.
(Packet Writing Problem with Windows XP Service Pack 2 is op de nero site te lezen.)

Bij wma inderdaad pluginnen, zoals eeder opgemerkt.

Maar ik heb geen incd geinstalleerd,dit is een nieuwe xp install incl SP2.

En ja ik heb de WMA pluginn.
 
Ik zie nu dat ik een foutmelding in Nero krijg.
>>Interne doelfout<<
 
Daarbij zie ik nog een error:

9:31:30 #28 CDR -1106 File Writer.cpp, Line 311
Power calibration error

Wat is het vermogen van je voeding?
Als die je hele pc niet meer aankan door alle aangasloten apparatuur of door slijtage, zou je deze error kunnen krijgen.

Heb je nog een andere voeding liggen?

Lees even mee op dit engelse forum.

En hier op een Nero.com problemen site.
 
Laatst bewerkt:
Ik heb de status van de DNA op PIO gezet en kan nu wel branden!!

Ieder bedankt voor de reacties..
 
Status
Niet open voor verdere reacties.
Terug
Bovenaan Onderaan