dropl
Verenigingslid
- Lid geworden
- 14 jan 2006
- Berichten
- 1.370
Ik draai Debian unstable.
Ik heb een Riva TNT-2 videokaart
Het draaide allemaal leuk totdat ik dvd's wilde gaan spelen. MPlayer zat te zaniken over m'n video driver en dus heb ik de driver van nvidia geinstalleerd. Dit werkt allemaal heel leuk onder X. Maar ergens tijdens het boot proces verdwijnt m'n console en gaat m'n monitor in standby. Als X dan geladen is komt die wel weer tot leven, maar m'n (ook erg fijne) consoles blijven onzichtbaar
Dus als iemand hier iets over weet, dan graag!
Nog even een dmesg dump:
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f7550
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x63e4, dseg 0xf0000
PnPBIOS: Missing SMALL_TAG_ENDDEP tag
PnPBIOS: Missing SMALL_TAG_ENDDEP tag
PnPBIOS: Missing SMALL_TAG_ENDDEP tag
PnPBIOS: Missing SMALL_TAG_ENDDEP tag
PnPBIOS: Missing SMALL_TAG_ENDDEP tag
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 89 & 1f -> 09
Boot video device is 0000:01:00.0
PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
PCI: IRQ 0 for device 0000:00:0f.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 11 for device 0000:00:0f.0
PCI: Sharing IRQ 11 with 0000:00:07.2
PCI: Sharing IRQ 11 with 0000:00:07.3
PCI: Sharing IRQ 11 with 0000:00:0a.1
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
PCI: Disabling Via external APIC routing
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 1480KiB [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
input: AT Translated Set 2 keyboard on isa0060/serio0
Freeing unused kernel memory: 176k freed
Capability LSM initialized
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:07.1
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda
MA, hdb
io
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc
io, hdd
MA
Probing IDE interface ide0...
hda: HDS722580VLAT20, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: HL-DT-STDVD-ROM GDR8164B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 1024KiB
hda: 160836480 sectors (82348 MB) w/1794KiB Cache, CHS=16383/255/63, UDMA(66)
hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
FDC 0 is a post-1991 82077
hdd: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Real Time Clock Driver v1.12
mice: PS/2 mouse device common for all mice
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
input: PC Speaker
usbcore: registered new driver usbfs
usbcore: registered new driver hub
parport_pc: VIA parallel port: io=0x378, irq=7
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 11 for device 0000:00:07.2
PCI: Sharing IRQ 11 with 0000:00:07.3
PCI: Sharing IRQ 11 with 0000:00:0a.1
PCI: Sharing IRQ 11 with 0000:00:0f.0
uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x0000c000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 11 for device 0000:00:07.3
PCI: Sharing IRQ 11 with 0000:00:07.2
PCI: Sharing IRQ 11 with 0000:00:0a.1
PCI: Sharing IRQ 11 with 0000:00:0f.0
uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
Linux agpgart interface v0.101 (c) Dave Jones
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:07.3: irq 11, io base 0x0000c400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Found IRQ 10 for device 0000:00:0a.0
PCI: Sharing IRQ 10 with 0000:00:07.5
uhci_hcd 0000:00:0a.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
uhci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:0a.0: irq 10, io base 0x0000b400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Found IRQ 11 for device 0000:00:0a.1
PCI: Sharing IRQ 11 with 0000:00:07.3
PCI: Sharing IRQ 11 with 0000:00:07.2
PCI: Sharing IRQ 11 with 0000:00:0f.0
uhci_hcd 0000:00:0a.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4)
uhci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:0a.1: irq 11, io base 0x0000b800
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
Linux Tulip driver version 1.1.13 (May 11, 2002)
PCI: Found IRQ 10 for device 0000:00:09.0
tulip0: MII transceiver #1 config 3100 status 7869 advertising 05e1.
eth0: ADMtek Comet rev 17 at 0001bc00, 00:0C:F6:0B:62:F7, IRQ 10.
usb 4-2: new full speed USB device using uhci_hcd and address 2
PCI: Found IRQ 10 for device 0000:00:07.5
PCI: Sharing IRQ 10 with 0000:00:0a.0
PCI: Setting latency timer of device 0000:00:07.5 to 64
Linux video capture interface: v1.00
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.4.1 (tagged release) loading
ivtv: Linux version: 2.6.12-1-k7 K7 gcc-4.0
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
PCI: Found IRQ 9 for device 0000:00:0a.2
ehci_hcd 0000:00:0a.2: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:0a.2: irq 9, io mem 0xdffffb00
ehci_hcd 0000:00:0a.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
PCI: Enabling device 0000:00:0f.0 (0000 -> 0002)
PCI: Found IRQ 11 for device 0000:00:0f.0
PCI: Sharing IRQ 11 with 0000:00:07.3
PCI: Sharing IRQ 11 with 0000:00:07.2
PCI: Sharing IRQ 11 with 0000:00:0a.1
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
tveeprom: Hauppauge: model = 26034, rev = C197, serial# = 2998923
tveeprom: tuner = LG PAL (TAPE Series) (idx = 97, type = 55)
tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x44, v4l2 = 0x00000e07)
tveeprom: audio_processor = MSP3400C (type = 4)
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
usb 5-4: new high speed USB device using ehci_hcd and address 2
cx25840 1-0044: ivtv driver
cx25840 1-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0)
usb 4-2: USB disconnect, address 2
cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
wm8775 1-001b: ivtv driver
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv0: Create encoder radio stream
tuner 1-0061: type set to 55 (LG PAL (TAPE series))
ivtv0: Initialized WinTV PVR 150, card #0
ivtv: ==================== END INIT IVTV ====================
Vendor: TOSHIBA Model: MK4025GAS Rev: 0000
Type: Direct-Access ANSI SCSI revision: 00
usb-storage: device scan complete
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
sda: assuming drive cache: write through
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Adding 939760k swap on /dev/hda5. Priority:-1 extents:1
EXT3 FS on hda1, internal journal
nvidiafb: nVidia device/chipset 10DE002D
nvidiafb: nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro]
nvidiafb: EDID found from BUS1
nvidiafb: Using CRT on CRTC 0
nvidiafb: MTRR set to ON
Console: switching to colour frame buffer device 90x25
nvidiafb: PCI nVidia NV2 framebuffer (16MB @ 0xD2000000)
NET: Registered protocol family 17
0000:00:09.0: tulip_stop_rxtx() failed
eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c032f880(lo)
IPv6 over IPv4 tunneling driver
Ik heb een Riva TNT-2 videokaart
Het draaide allemaal leuk totdat ik dvd's wilde gaan spelen. MPlayer zat te zaniken over m'n video driver en dus heb ik de driver van nvidia geinstalleerd. Dit werkt allemaal heel leuk onder X. Maar ergens tijdens het boot proces verdwijnt m'n console en gaat m'n monitor in standby. Als X dan geladen is komt die wel weer tot leven, maar m'n (ook erg fijne) consoles blijven onzichtbaar
Dus als iemand hier iets over weet, dan graag!
Nog even een dmesg dump:
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f7550
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x63e4, dseg 0xf0000
PnPBIOS: Missing SMALL_TAG_ENDDEP tag
PnPBIOS: Missing SMALL_TAG_ENDDEP tag
PnPBIOS: Missing SMALL_TAG_ENDDEP tag
PnPBIOS: Missing SMALL_TAG_ENDDEP tag
PnPBIOS: Missing SMALL_TAG_ENDDEP tag
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 89 & 1f -> 09
Boot video device is 0000:01:00.0
PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
PCI: IRQ 0 for device 0000:00:0f.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 11 for device 0000:00:0f.0
PCI: Sharing IRQ 11 with 0000:00:07.2
PCI: Sharing IRQ 11 with 0000:00:07.3
PCI: Sharing IRQ 11 with 0000:00:0a.1
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
PCI: Disabling Via external APIC routing
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 1480KiB [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
input: AT Translated Set 2 keyboard on isa0060/serio0
Freeing unused kernel memory: 176k freed
Capability LSM initialized
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:07.1
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda


ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc


Probing IDE interface ide0...
hda: HDS722580VLAT20, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: HL-DT-STDVD-ROM GDR8164B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 1024KiB
hda: 160836480 sectors (82348 MB) w/1794KiB Cache, CHS=16383/255/63, UDMA(66)
hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
FDC 0 is a post-1991 82077
hdd: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Real Time Clock Driver v1.12
mice: PS/2 mouse device common for all mice
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
input: PC Speaker
usbcore: registered new driver usbfs
usbcore: registered new driver hub
parport_pc: VIA parallel port: io=0x378, irq=7
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 11 for device 0000:00:07.2
PCI: Sharing IRQ 11 with 0000:00:07.3
PCI: Sharing IRQ 11 with 0000:00:0a.1
PCI: Sharing IRQ 11 with 0000:00:0f.0
uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x0000c000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 11 for device 0000:00:07.3
PCI: Sharing IRQ 11 with 0000:00:07.2
PCI: Sharing IRQ 11 with 0000:00:0a.1
PCI: Sharing IRQ 11 with 0000:00:0f.0
uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
Linux agpgart interface v0.101 (c) Dave Jones
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:07.3: irq 11, io base 0x0000c400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Found IRQ 10 for device 0000:00:0a.0
PCI: Sharing IRQ 10 with 0000:00:07.5
uhci_hcd 0000:00:0a.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
uhci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:0a.0: irq 10, io base 0x0000b400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Found IRQ 11 for device 0000:00:0a.1
PCI: Sharing IRQ 11 with 0000:00:07.3
PCI: Sharing IRQ 11 with 0000:00:07.2
PCI: Sharing IRQ 11 with 0000:00:0f.0
uhci_hcd 0000:00:0a.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4)
uhci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:0a.1: irq 11, io base 0x0000b800
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
Linux Tulip driver version 1.1.13 (May 11, 2002)
PCI: Found IRQ 10 for device 0000:00:09.0
tulip0: MII transceiver #1 config 3100 status 7869 advertising 05e1.
eth0: ADMtek Comet rev 17 at 0001bc00, 00:0C:F6:0B:62:F7, IRQ 10.
usb 4-2: new full speed USB device using uhci_hcd and address 2
PCI: Found IRQ 10 for device 0000:00:07.5
PCI: Sharing IRQ 10 with 0000:00:0a.0
PCI: Setting latency timer of device 0000:00:07.5 to 64
Linux video capture interface: v1.00
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.4.1 (tagged release) loading
ivtv: Linux version: 2.6.12-1-k7 K7 gcc-4.0
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
PCI: Found IRQ 9 for device 0000:00:0a.2
ehci_hcd 0000:00:0a.2: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:0a.2: irq 9, io mem 0xdffffb00
ehci_hcd 0000:00:0a.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
PCI: Enabling device 0000:00:0f.0 (0000 -> 0002)
PCI: Found IRQ 11 for device 0000:00:0f.0
PCI: Sharing IRQ 11 with 0000:00:07.3
PCI: Sharing IRQ 11 with 0000:00:07.2
PCI: Sharing IRQ 11 with 0000:00:0a.1
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
tveeprom: Hauppauge: model = 26034, rev = C197, serial# = 2998923
tveeprom: tuner = LG PAL (TAPE Series) (idx = 97, type = 55)
tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x44, v4l2 = 0x00000e07)
tveeprom: audio_processor = MSP3400C (type = 4)
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
usb 5-4: new high speed USB device using ehci_hcd and address 2
cx25840 1-0044: ivtv driver
cx25840 1-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0)
usb 4-2: USB disconnect, address 2
cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
wm8775 1-001b: ivtv driver
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv0: Create encoder radio stream
tuner 1-0061: type set to 55 (LG PAL (TAPE series))
ivtv0: Initialized WinTV PVR 150, card #0
ivtv: ==================== END INIT IVTV ====================
Vendor: TOSHIBA Model: MK4025GAS Rev: 0000
Type: Direct-Access ANSI SCSI revision: 00
usb-storage: device scan complete
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
sda: assuming drive cache: write through
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Adding 939760k swap on /dev/hda5. Priority:-1 extents:1
EXT3 FS on hda1, internal journal
nvidiafb: nVidia device/chipset 10DE002D
nvidiafb: nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro]
nvidiafb: EDID found from BUS1
nvidiafb: Using CRT on CRTC 0
nvidiafb: MTRR set to ON
Console: switching to colour frame buffer device 90x25
nvidiafb: PCI nVidia NV2 framebuffer (16MB @ 0xD2000000)
NET: Registered protocol family 17
0000:00:09.0: tulip_stop_rxtx() failed
eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c032f880(lo)
IPv6 over IPv4 tunneling driver