Driver
- Onderwerp starter nrouno
- Startdatum
- Status
Muurhond
Inventaris
- Lid geworden
- 23 jun 2001
- Berichten
- 10.584
maestro12
Inventaris
- Lid geworden
- 2 jan 2001
- Berichten
- 13.656
In anderhalve minuut http://ts.thrustmaster.com/eng/?pa=drv&id_prd=T16&cy=UK&ft=4
En dan krijg je dit te zien:
No drivers are required for this device
This device is fully compliant with the "Human Interface Device" specifications.
We have developed the device in such a way that it will be recognize under the Microsoft Operating systems (Windows 98 series, Me, 2000 and Windows XP) as an "HID compliant Game Device".
By simply connecting your Thrustmaster game controllers to the computer’s USB port, it will become available in Windows Game Controller / Gaming Option.
The drivers provided by Microsoft will ensure you a perfect compatibility with any games using DirectX technology (100% of today's games!).
Note: If you wish to use advanced functions (Like Axis and Button programming or Keyboard key mapping), the Thrustmapper software is available from the "Software" section. This program will install proprietary drivers to enable such functions.
En dan krijg je dit te zien:
No drivers are required for this device
This device is fully compliant with the "Human Interface Device" specifications.
We have developed the device in such a way that it will be recognize under the Microsoft Operating systems (Windows 98 series, Me, 2000 and Windows XP) as an "HID compliant Game Device".
By simply connecting your Thrustmaster game controllers to the computer’s USB port, it will become available in Windows Game Controller / Gaming Option.
The drivers provided by Microsoft will ensure you a perfect compatibility with any games using DirectX technology (100% of today's games!).
Note: If you wish to use advanced functions (Like Axis and Button programming or Keyboard key mapping), the Thrustmapper software is available from the "Software" section. This program will install proprietary drivers to enable such functions.
Laatst bewerkt:
maestro12
Inventaris
- Lid geworden
- 2 jan 2001
- Berichten
- 13.656
Weer 30 seconden verder, deze link:
http://ts.thrustmaster.com/eng/index.php?pg=view_files&gid=1&fid=3&pid=44&cid=1
http://ts.thrustmaster.com/eng/index.php?pg=view_files&gid=1&fid=3&pid=44&cid=1
TS
TS
nrouno
Gebruiker
- Lid geworden
- 25 apr 2001
- Berichten
- 132
Ik durf bijna niet meer te antwoorden , omdat jij waarschijnlijk binnen 30 sec weer een andere webcite zal vinden ! maar daarmee is het probleem nog niet opgelost , het probleem is dat ik mijn joystick niet geinstaleerd krijg, en telkens zegt (niet verbonden).
trouwens op die website was ik ook al geweest, blijkbaar heb ik geen driver nodig ?
trouwens op die website was ik ook al geweest, blijkbaar heb ik geen driver nodig ?
TS
TS
nrouno
Gebruiker
- Lid geworden
- 25 apr 2001
- Berichten
- 132
Hij is aangesloten op de game poort, mijn vorige joystick werkte prima ! als ik die terug insteek is mijn status ok, als ik de andere insteek zegt hij niet verbonden ? ik gebruik de standaard poort. ik weet niet of hij is aangesloten op mijn geluidskaart, waar kan ik dat zien ?
maestro12
Inventaris
- Lid geworden
- 2 jan 2001
- Berichten
- 13.656
Je hebt dit allemaal gedaan???
- From Windows "Control Panel", select Game Controllers/ Gaming Options (depending on your Operating System).
- Click the ADD button and select the "Custom" configuration.
(this "custom" driver allow any user to make his own standard game port driver according to its game controller hardware in the condition that the gaming controller is analog and plugged in the game port)
For the TOP GUN FOX 2, please fill game controller hardware information as follow :
- It's a joystick
- with 3 axis
- with 4 buttons.
- NO POD (Point Of View - Hat Switch)
- Click OK and give a name to your custom configuration - i.e. : TOP GUN FOX 2
- Your custom driver should now appears in the Windows game controller panel with the state "OK"
- Finally, select the "TOP GUN FOX 2" configuration line with your mouse and click on "PROPERTIES" and then proceed with calibration.
-Run the calibration process : This will allow your operating system (Windows) to properly communicates with the hardware. During all calibration steps, windows will memories axis range of motion and axis center data. This is very important if you want the joystick to be accurate within the game.
- Launch your game. The joystick should be available.
Note : Don't forget to read your game's manual to check how your can set your joystick within the game.
Met name het laatste stuk over het calibreren is belangrijk, want mijn merkloze Joystick werkt ook niet zonder dat dit gedaan is maar wel een OK status.
- From Windows "Control Panel", select Game Controllers/ Gaming Options (depending on your Operating System).
- Click the ADD button and select the "Custom" configuration.
(this "custom" driver allow any user to make his own standard game port driver according to its game controller hardware in the condition that the gaming controller is analog and plugged in the game port)
For the TOP GUN FOX 2, please fill game controller hardware information as follow :
- It's a joystick
- with 3 axis
- with 4 buttons.
- NO POD (Point Of View - Hat Switch)
- Click OK and give a name to your custom configuration - i.e. : TOP GUN FOX 2
- Your custom driver should now appears in the Windows game controller panel with the state "OK"
- Finally, select the "TOP GUN FOX 2" configuration line with your mouse and click on "PROPERTIES" and then proceed with calibration.
-Run the calibration process : This will allow your operating system (Windows) to properly communicates with the hardware. During all calibration steps, windows will memories axis range of motion and axis center data. This is very important if you want the joystick to be accurate within the game.
- Launch your game. The joystick should be available.
Note : Don't forget to read your game's manual to check how your can set your joystick within the game.
Met name het laatste stuk over het calibreren is belangrijk, want mijn merkloze Joystick werkt ook niet zonder dat dit gedaan is maar wel een OK status.
TS
TS
nrouno
Gebruiker
- Lid geworden
- 25 apr 2001
- Berichten
- 132
Ja dat heb ik allemaal gedaan , zo staat het trouwens ook in het boekje dat bij de joystick was , hij zegt niet ok, maar niet verbonden ? Begin al te denken er er is mis is met de joystick zelf.
Zal hem eens aan vrienden geven om te zien of zij hem op hun pc wel kunnen instaleren ?
Zal hem eens aan vrienden geven om te zien of zij hem op hun pc wel kunnen instaleren ?
- Status
