DVD+R Dual layer branden met een NEC DVD_RW 2510_A mislukt steeds.

extremefun1 · 17 okt 2010

Ik wil graag dual layers DVD's branden. Mijn brander is een NEC DVD_RW 2510_A brander.

Volgens nero infotool en verschillende reviews zou deze brander DVD+R DL moeten kunnen branden. Maar het lukt maar niet met nero en imgburner. Cd's is geen probleem.

Heeft iemand een idee waarom dit niet lukt?

Extra informatie:
----------------------------------------------------------
DVD's die ik gebruik zijn:
Dual layer platinum 8.5GB 8x speed
---------------------------------------------------------
Drive informatie volgens imgburner:
_NEC DVD_RW ND-2510A 2.15 (ATA)
Current Profile: DVD+R DL

Disc Information:
Status: Empty
State of Last Session: Empty
Erasable: No
Free Sectors: 3*827*488
Free Space: 7*838*695*424 bytes
Free Time: 850:35:13 (MM:SS:FF)
Next Writable Address: 0

DVD±R DL Boundary Information:
L0 Data Zone Capacity: 1*913*744
Changeable: No

Physical Format Information (ADIP):
Disc ID: RITEK-S04-66
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196*608
Last Physical Sector of Data Area: 16*580*607
Last Physical Sector in Layer 0: 2*283*519

-----------------------------------------------------------
Nero informatie over het branden:

Bericht: Burn process failed at 8x

1K22-0867-0795-66M4-5041-2725-****

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.3.2.1
Internal Version: 8, 3, 2, 1
(Nero Express)
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.15 - HA 1 TA 0 - 8.3.2.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <CPQHUZ ENGXQNOH >Version: 1.03 - HA 1 TA 2 - 8.3.2.1
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : CPQHUZ ENGXQNOH 1.03 abfpoalx Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-2510A F: CdRom0
CPQHUZ ENGXQNOH I: CdRom2
=======================

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048096kB)
Free physical memory: 556MB (569568kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

1.1.2002
Burn DVD Image
03:13:20 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

03:13:20 #2 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using DVD media

03:13:20 #3 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 3827487 (850:33.12, 7475MB)
Last address to be written: 3827487 (850:33.12, 7475MB)

03:13:20 #4 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)

03:13:20 #5 Text 0 File DlgWaitCD.cpp, Line 2932
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD+R DL

03:13:20 #6 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================

03:13:20 #7 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 3827488 (3827488) = #3827488/850:33.13
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3827488 blocks [F: _NEC DVD_RW ND-2510A]
--------------------------------------------------------------

03:13:20 #8 Text 0 File ThreadedTransferInterface.cpp, Line 956
Prepare [F: _NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7838695424, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 3827488 | 3827488 | 0x00
3827488 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

03:13:20 #9 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

03:13:20 #10 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)

03:13:20 #11 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

03:13:20 #12 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.

03:13:20 #13 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

03:13:20 #14 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 8x (11*080 KB/s)

03:13:20 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

03:13:20 #16 Text 0 File DVDPlusDualLayer.cpp, Line 593
L0 Data Zone Capacity already set to 1913744 (1D3390h, 3737MB), requested last LBA L0 0 (0h, 0MB) ignored

03:13:20 #17 Text 0 File DVDPlusDualLayer.cpp, Line 756
L0 Data Zone Capacity not set.
Max LBA L0 1913743 (1D338Fh, 3737MB), next writable address 0 (0h, 0MB)

03:13:20 #18 CDR -1205 File DVDPlusDualLayer.cpp, Line 772
Burning Layer 1

03:13:20 #19 Text 0 File DVDPlusDualLayer.cpp, Line 782
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode

03:13:20 #20 SPTI -1066 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x0783e7c0: Len x804

03:13:20 #21 SPTI -1066 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0xC9 03 02 00 42 54 59 50 45 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24

03:13:20 #22 Text 0 File DVDR.cpp, Line 6901
Drive: _NEC DVD_RW ND-2510A
Book Type request [NEC]: DVD-ROM, write to RAM
Changing the Book Type was finished with error, return code -1066

03:13:20 #23 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes

03:13:20 #24 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

03:13:21 #25 SPTI -1046 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
Buffer x08cc0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

03:13:21 #26 CDR -1046 File Writer.cpp, Line 306
Illegal disc
F: _NEC DVD_RW ND-2510A

03:13:22 #27 SPTI -1046 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

03:13:22 #28 SPTI -1046 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

03:13:22 #29 Phase 127 File dlgbrnst.cpp, Line 1767
Generating DVD high compatibility borders

03:13:22 #30 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 0

03:13:22 #31 CDR -1046 File WriterStatus.cpp, Line 292
Illegal disc
F: _NEC DVD_RW ND-2510A

03:13:22 #32 TRANSFER -24 File WriterStatus.cpp, Line 292
Could not perform end of Disc-at-once

03:13:23 #33 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 8x (11*080 KB/s)

03:13:23 #34 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

03:13:25 #35 Text 0 File Cdrdrv.cpp, Line 11420
DriveLocker: UnLockVolume completed

03:13:25 #36 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

--------------------------------------------

Windowsfaq · 17 okt 2010

Beste extremefun1,
Probeer eens met Roxio creator 2011,
(http://www.roxio.com/nld/products/creator/pro/overview.html)

óf probeer het met Power2go.
(http://www.cyberlink.com/products/power2go/overview_en_US.html)

Veel suc6

jackall · 17 okt 2010

Kunnen een paar dingen zijn.
Deze brander stamt uit 2003, nog net in die tijd dat dvdbranders nog niet alle merken schijven slikte.
Optie 1 is een ander merk schijf proberen, optie 2 een lagere brandsnelheid selecteren, hoewel dvd9 op max 2.4x kan worden gebrand met deze brander. optie 3(eigen risico) firmwareupdate naar de laatste versie, of 4 uitkijken naar een nieuwere brander voor die paar tientjes.

DVD+R Dual layer branden met een NEC DVD_RW 2510_A mislukt steeds.

extremefun1

Gebruiker

Windowsfaq

Terugkerende gebruiker

jackall

Moderator

Nieuwste berichten

Wij waarderen jouw privacy