Kan geen schijfletter toewijzen

  • Onderwerp starter Onderwerp starter XY32
  • Startdatum Startdatum
Status
Niet open voor verdere reacties.

XY32

Gebruiker
Lid geworden
15 mei 2006
Berichten
29
Hallo,

Ik had een backuppartitie op mijn systeem (EISA) staan die ik heb verwijderd omdat ik de extra ruimte wel kan gebruiken. Wat nu de primaire partitie zou moeten zijn (waar Vista op staat) is nu echter veranderd in een EISA-schijf die ik geen schijfletter kan toewijzen. Ook kan ik Vista niet meer normaal starten (ik krijg dan een groen scherm), wel in veilige modus (in Explorer heet de schijf dan wel C: maar onder Schijfbeheer is het een naamloze schijf).

Als ik in XP start, kan ik dus ook niet op deze schijf komen. Wel kan ik met Easeus (partitiemanager) een schijfletter toewijzen, maar Windows neemt dit dan niet over.

Hoe kan ik dit het beste herstellen?
 
Dat is nou dom.
Met de eisa partitie had je windows kunnen herstellen.
Dat gaat nu dus ook niet meer.
Het is niet alleen backup,ook je windows installatie stond daarop.
 
Hoi !

Ja, nu heb je jezelf in de problemen gebracht !

Wil je de partitie definitief verwijderen en ken je de consequentie´s dan lees het volgende goed door

However, it’s recommended that users check with manufacturer first if the OEM provides any removal and deletion procedure or guide, such as those provided by Lenovo/IBM and HP. If none is found, it’s possible to remove the recovery partition from Windows Vista, by using advanced Diskpart, a text-mode command line interpreter based on scripts that manages hard disk, partition and volume in Vista (also available for free download for XP, 2000, and 2003).

Here’s the trick to delete and remove the EISA recovery or diagnostic partition in Vista. Before proceeding with the deletion action, make sure that at least a set of Recovery Disc Media has been created. Else, you won’t be able to restore your computer to working and factory default condition when any problem on PC requires reinstallation.

Open a command prompt as administrator.
Run Diskpart application by typing Diskpart in the command prompt.
In the “Diskpart” prompt, enter rescan command and press Enter key to re-scan all partitions, volumes and drives available.
Then type in list disk and press Enter key to show all hard disk drive available.
Select the disk that contains the partition you want to remove. Normally, with just 1 hard disk, it will be disk 0. So the command will be:

select disk 0

Finish by Enter key.
Type list partition and press Enter key to show all available and created partition in the disk selected.
Select the partition that wanted to be deleted by using the following command, followed by Enter key:

select partition x

where x is the number of the EISA based recovery partition to be removed and unlocked its space. Be careful with the number of this partition, as wrong number may get data wipes off.
Finally, type in delete partition override and press Enter key.

Succes,

Harry.
 
ok maar het probleem is dus dat de schijf die nu als EISA wordt weergegeven, helemaal geen EISA-schijf was. Dit is gewoon de schijf waar Vista op staat met de rest van mijn bestanden (NTFS). Dit verwijderen is voor mij geen optie want ik heb niet genoeg schijfruimte om de bestanden elders te plaatsen.
 
Ik heb er nooit een dvd bij gekregen... Ik moest zelf een kopie branden vanaf die herstelpartitie maar daar kon ik niet bij komen.

Ik heb de veilige modus met commandoprompt geprobeerd, maar dan werkt bootrec niet. Ik heb nu EasyBCD gevonden dus dat zal ik eerst nog testen.
 
Ik heb de schijf omgezet naar logische schijf, toen terug naar primaire schijf. Nu heeft deze schijf wel een letter en ik kan hem vanuit Win weer lezen, maar Vista start nu helemaal niet meer op.

Ik heb overigens multiboot met Windows XP/Vista/7 en het is niet zo erg als Vista niet meer werkt (deze was voorgeïnstalleerd), maar ik kan nu tenminste weer bij mijn gegevens.

Bedankt voor jullie hulp :thumb:
 
Status
Niet open voor verdere reacties.
Terug
Bovenaan Onderaan