problemen met branden

jackbosman · 10 jan 2012

Hallo mensen

Ik probeer nu al enkele weken een film te branden met Nero, maar bij het begin stop hij er direct mee. Nu ben ik iemand die er niet veel vanaf weet, hoop dan ook dat er iemand hier is die mij kan gaan helpen.
De fout die Nero aangeeft is

Code:

Windows XP 6.0
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0
 (Nero Express)
Recorder:             <MAT****A BD-CMB UJ130AS> Version: 1.01 - HA 1 TA 0 - 7.10.1.0
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      8192kB
 Bus Type      :      via Inquiry data (1) -> ATAPI, detected: ?
 Connected to MMC as unknown drive with class-nr : 1
 Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM:               <MAT****A BD-CMB UJ130AS  >Version: 1.01 - HA 1 TA 0 - 7.10.1.0
 Adapter driver:      <IDE>                     HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : TOSHIBA MK4058GSX               iaStor Port 0 ID 0  DMA: On 
CdRomPeripheral      : MAT****A BD-CMB UJ130AS         iaStor Port 0 ID 1  DMA: Off

=== CDRom-Device-Map ===
MAT****A BD-CMB UJ130AS    F:   CdRom0
DTSOFT BDROM               G:   CdRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 2047MB (2097151kB)
Free physical memory: 1341MB (1373904kB)
Memory in use       : 55 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

10.1.2012
UDF/ISO compilation
17:32:59	#1 Text 0 File SCSIPTICommands.cpp, Line 424
	LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
17:32:59	#2 Phase 112 File dlgbrnst.cpp, Line 1762
	DVD-Video files reallocation started
	
17:32:59	#3 DVDREALLOC -21 File DVDVideoCompilation.cpp, Line 1317
	Required file 'VTS_01_0.VOB' is not present
	
17:32:59	#4 Phase 115 File dlgbrnst.cpp, Line 1762
	DVD-Video files reallocation failed
	
17:33:04	#5 Phase 132 File dlgbrnst.cpp, Line 1762
	DVD-Video files compliance ignored
	
17:33:04	#6 Text 0 File Isodoc.cpp, Line 6666
	UDF document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	UDF Mode                : UDF/ISO bridge
	UDF Options             : automatic
	UDF Revision            : 1.02
	UDF Partition Type      : physical
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : FALSE
	Allow pathdepth more than 8 directories : FALSE
	Allow more than 255 characters in path  : FALSE
	Write ISO9660 ;1 file extensions        : TRUE
	
17:33:04	#7 Phase 111 File dlgbrnst.cpp, Line 1762
	DVD-Video files sorted
	
17:33:04	#8 ISO9660GEN -11 File Geniso.cpp, Line 3343
	First writeable address = 0 (0x00000000)
	
17:33:04	#9 ISO9660GEN -11 File Geniso.cpp, Line 3343
	First writeable address = 0 (0x00000000)
	
17:33:04	#10 Text 0 File Burncd.cpp, Line 3508
	Turn on Disc-At-Once, using DVD media
	
17:33:05	#11 Text 0 File DlgWaitCD.cpp, Line 307
	Last possible write address on media:  2295103 (510:01.28, 4482MB)
	Last address to be written:                639 (  0:08.39,    1MB)
	
17:33:05	#12 Text 0 File DlgWaitCD.cpp, Line 319
	Write in overburning mode: NO (enabled: CD)
	
17:33:05	#13 Text 0 File DlgWaitCD.cpp, Line 2972
	Recorder: MAT****A BD-CMB UJ130AS, Media type: DVD+R
	 Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
	 Disc Application Code: 0, Extended Information Indicators: 7
	
17:33:05	#14 Text 0 File DlgWaitCD.cpp, Line 493
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
17:33:05	#15 Text 0 File ThreadedTransferInterface.cpp, Line 793
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 640 (640) = #640/0:8.40
	    relocatable, disc pos for caching/writing not required/ required
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 640 blocks [F: MAT****A BD-CMB UJ130AS]
	--------------------------------------------------------------
	
17:33:05	#16 Text 0 File ThreadedTransferInterface.cpp, Line 995
	Prepare [F: MAT****A BD-CMB UJ130AS] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0       1310720, ISRC ""
	DAO layout:
	===========
	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
	        0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   1 |    0x41 |      640 |        0 | 0x00
	      640 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
	
17:33:05	#17 Text 0 File SCSIPTICommands.cpp, Line 215
	SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
	
17:33:05	#18 Text 0 File Burncd.cpp, Line 4294
	Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
	
17:33:05	#19 Phase 24 File dlgbrnst.cpp, Line 1762
	Caching of files started
	
17:33:05	#20 Text 0 File Burncd.cpp, Line 4413
	Cache writing successful.
	
17:33:05	#21 Phase 25 File dlgbrnst.cpp, Line 1762
	Caching of files completed
	
17:33:06	#22 Phase 36 File dlgbrnst.cpp, Line 1762
	Burn process started at 8x (11.080 KB/s)
	
17:33:06	#23 Text 0 File ThreadedTransferInterface.cpp, Line 2721
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
17:33:06	#24 Text 0 File Cdrdrv.cpp, Line 9872
	---- Disc Structure: Physical Format Information (00h) ----
	Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD+R (10), Part Version: 1.0x (1)
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Disc Application Code: 0 / 0 h
	  Extended Information indicators: 7 h
	  Disc Manufacturer ID: MCC.....
	  Media type ID: 004
	  Product revision number: 0
	  Number of Physical format information bytes in use in ADIP up to byte 63: 56
	 Media Specific [16..63]:
	    00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38    ...MCC.....004.8
	    23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08    #T7..Tl.._......
	    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00    ................
	
17:33:06	#25 SPTI -1066 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)

Mensen dit is voor mij de eerste keer, laat even weten als ik iets verkeerd doe

jackall · 10 jan 2012

Probleem iin dit geval is duidelijk.
De dvd files zijn niet compleet.

Zie 17:32:59 in de logfile

BTW, welkom op helpmij.nl

jackbosman · 11 jan 2012

Probleem met branden

Hallo Jakhall.

het eerst wil ik je bedanken voor je reactie

het volgende. Heb nu verschillende films geprobeerd te branden, maar na enkele seconden stop Nero er mee. Ook met clone heb ik het zelfde probleem.
Heb de zelfde film geprobeerd op een andere PC, maar dat was helemaal geen probleem .

Het volgende foutmelding van NERO is .

Code:

IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0
 (Nero Express)
Recorder:             <MAT****A BD-CMB UJ130AS> Version: 1.01 - HA 1 TA 0 - 7.10.1.0
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      8192kB
 Bus Type      :      via Inquiry data (1) -> ATAPI, detected: ?
 Connected to MMC as unknown drive with class-nr : 1
 Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM:               <MAT****A BD-CMB UJ130AS  >Version: 1.01 - HA 1 TA 0 - 7.10.1.0
 Adapter driver:      <IDE>                     HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : TOSHIBA MK4058GSX               iaStor Port 0 ID 0  DMA: On 
CdRomPeripheral      : MAT****A BD-CMB UJ130AS         iaStor Port 0 ID 1  DMA: Off

=== CDRom-Device-Map ===
MAT****A BD-CMB UJ130AS    F:   CdRom0
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 2047MB (2097151kB)
Free physical memory: 1637MB (1677228kB)
Memory in use       : 46 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

10.1.2012
UDF/ISO compilation
21:57:32	#1 Text 0 File SCSIPTICommands.cpp, Line 424
	LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
21:57:33	#2 Phase 112 File dlgbrnst.cpp, Line 1762
	DVD-Video files reallocation started
	
21:57:34	#3 Phase 114 File dlgbrnst.cpp, Line 1762
	DVD-Video files reallocation completed (no file modified)
	
21:57:34	#4 Text 0 File Isodoc.cpp, Line 6666
	UDF document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	UDF Mode                : UDF/ISO bridge
	UDF Options             : automatic
	UDF Revision            : 1.02
	UDF Partition Type      : physical
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : FALSE
	Allow pathdepth more than 8 directories : FALSE
	Allow more than 255 characters in path  : FALSE
	Write ISO9660 ;1 file extensions        : TRUE
	
21:57:34	#5 Phase 111 File dlgbrnst.cpp, Line 1762
	DVD-Video files sorted
	
21:57:35	#6 ISO9660GEN -11 File Geniso.cpp, Line 3343
	First writeable address = 0 (0x00000000)
	
21:57:35	#7 ISO9660GEN -11 File Geniso.cpp, Line 3343
	First writeable address = 0 (0x00000000)
	
21:57:35	#8 Text 0 File Burncd.cpp, Line 3508
	Turn on Disc-At-Once, using DVD media
	
21:57:35	#9 Text 0 File DlgWaitCD.cpp, Line 307
	Last possible write address on media:  2295103 (510:01.28, 4482MB)
	Last address to be written:            2286127 (508:01.52, 4465MB)
	
21:57:35	#10 Text 0 File DlgWaitCD.cpp, Line 319
	Write in overburning mode: NO (enabled: CD)
	
21:57:35	#11 Text 0 File DlgWaitCD.cpp, Line 2972
	Recorder: MAT****A BD-CMB UJ130AS, Media type: DVD+R
	 Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
	 Disc Application Code: 0, Extended Information Indicators: 7
	
21:57:35	#12 Text 0 File DlgWaitCD.cpp, Line 493
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
21:57:35	#13 Text 0 File ThreadedTransferInterface.cpp, Line 793
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
	    relocatable, disc pos for caching/writing not required/ required
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [F: MAT****A BD-CMB UJ130AS]
	--------------------------------------------------------------
	
21:57:35	#14 Text 0 File ThreadedTransferInterface.cpp, Line 995
	Prepare [F: MAT****A BD-CMB UJ130AS] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4681990144, ISRC ""
	DAO layout:
	===========
	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
	        0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   1 |    0x41 |  2286128 |        0 | 0x00
	  2286128 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
	
21:57:35	#15 Text 0 File SCSIPTICommands.cpp, Line 215
	SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
	
21:57:35	#16 Text 0 File Burncd.cpp, Line 4294
	Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
	
21:57:35	#17 Phase 24 File dlgbrnst.cpp, Line 1762
	Caching of files started
	
21:57:35	#18 Text 0 File Burncd.cpp, Line 4413
	Cache writing successful.
	
21:57:35	#19 Phase 25 File dlgbrnst.cpp, Line 1762
	Caching of files completed
	
21:57:35	#20 Phase 36 File dlgbrnst.cpp, Line 1762
	Burn process started at 8x (11.080 KB/s)
	
21:57:35	#21 Text 0 File ThreadedTransferInterface.cpp, Line 2721
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
21:57:35	#22 Text 0 File Cdrdrv.cpp, Line 9872
	---- Disc Structure: Physical Format Information (00h) ----
	Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD+R (10), Part Version: 1.0x (1)
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Disc Application Code: 0 / 0 h
	  Extended Information indicators: 7 h
	  Disc Manufacturer ID: MCC.....
	  Media type ID: 004
	  Product revision number: 0
	  Number of Physical format information bytes in use in ADIP up to byte 63: 56
	 Media Specific [16..63]:
	    00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38    ...MCC.....004.8
	    23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08    #T7..Tl.._......
	    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00    ................
	
21:57:35	#23 SPTI -1066 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x24
	Sense Qual: 0x00
	CDB Data:   0xAC 00 00 00 00 00 00 00 00 64 00 00 
	Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 
	Buffer x07f0c700: Len x648
	
21:57:35	#24 Text 0 File DVDPlusRW.cpp, Line 675
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
21:57:35	#25 Text 0 File ThreadedTransfer.cpp, Line 269
	Pipe memory size 83836800
	
21:58:03	#26 SPTI -1106 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x73
	Sense Qual: 0x03
	CDB Data:   0x2A 00 00 00 0E 80 00 00 20 00 00 00 
	Sense Area: 0xF1 00 03 00 00 00 00 0A 00 23 1C C0 73 03 
	Buffer x197e1d40: Len x10000
	0x00 00 01 BA 44 00 75 16 F5 69 01 89 C3 F8 00 00 
	0x01 BD 07 EC 81 80 05 21 00 1D 69 AF 80 03 01 84 
	0x8A 6F 55 B2 53 E8 34 29 D5 19 D6 AC 98 96 CF 1F 
	
21:58:03	#27 CDR -1106 File Writer.cpp, Line 303
	Power calibration error
	F: MAT****A BD-CMB UJ130AS
	
21:58:04	#28 SPTI -1106 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x73
	Sense Qual: 0x03
	CDB Data:   0x5B 01 01 00 00 01 00 00 00 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 0A 00 23 1C C0 73 03 
	
21:58:04	#29 SPTI -1106 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x73
	Sense Qual: 0x03
	CDB Data:   0x5B 01 05 00 00 00 00 00 00 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 0A 00 23 1C C0 73 03 
	
21:58:04	#30 Phase 127 File dlgbrnst.cpp, Line 1762
	Generating DVD high compatibility borders
	
21:58:04	#31 Text 0 File DVDPlusRW.cpp, Line 935
	EndDAO: Last written address 3712
	
21:58:04	#32 CDR -1106 File WriterStatus.cpp, Line 162
	Power calibration error
	F: MAT****A BD-CMB UJ130AS
	
21:58:04	#33 TRANSFER -24 File WriterStatus.cpp, Line 162
	Could not perform end of Disc-at-once
	
21:58:05	#34 Phase 38 File dlgbrnst.cpp, Line 1762
	Burn process failed at 8x (11.080 KB/s)
	
21:58:05	#35 Text 0 File SCSIPTICommands.cpp, Line 261
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
21:58:09	#36 Text 0 File Cdrdrv.cpp, Line 11185
	DriveLocker: UnLockVolume completed
	
21:58:09	#37 Text 0 File SCSIPTICommands.cpp, Line 424
	UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon

Groetjes jack

jackall · 12 jan 2012

Deze logfile verteld net iets meer.
De melding "power calibration error" duidt op een defecte brander.
Als je een andere hebt liggen probeer dan die eens iut, of voor enkele tientjes een nieuwe.

jackbosman · 12 jan 2012

Probleem met branden

Hallo Jackall

Je laat mij weten dat het een defecte brander moet zijn. Als ik een iso bestand brand ( film dus ) met dvd decrypter, dan heb ik het probleem niet.
Zou het niet aan de sofware zijn, clone en nero heb ik binnen gehaald via ftd .

jackbosman · 28 jan 2012

probleem met branden

hallo mensen

Is er iemand die voor mij een oplossing weet, kan al een tijdje niet branden. Niet met Nero of clone dvd, het probleem heb ik niet met Decrypter.

Is er iemand die ook dit probleem heeft

problemen met branden

jackbosman

Nieuwe gebruiker

jackall

Moderator

jackbosman

Nieuwe gebruiker

jackall

Moderator

jackbosman

Nieuwe gebruiker

jackbosman

Nieuwe gebruiker

Nieuwste berichten

Wij waarderen jouw privacy