SAMSUNG TV standaard op HD instellen

  • Onderwerp starter Onderwerp starter Bone
  • Startdatum Startdatum
Status
Niet open voor verdere reacties.

Bone

Gebruiker
Lid geworden
18 sep 2008
Berichten
230
Hallo,

Ik ben in het bezit van een samsung ue46d5000.

Elke keer als ik de TV aanzet moet ik deze op HD (in dit geval HDMI4) zetten.

Kan ik dit ergens standaard instellen dat dit bij het aanzetten standaard op HDMI4 staat?

Ik hoor het graag.

Gr. Tom
 
Staat de decoder dan wel aan?
Heb hier een U37 en als hij uit is gezet op hdmi 4 gaat hij daar naar toe als ik hem aanzet.
 
Bij onze Samsung (volgens mijn zoon):
. De tv zet je uit terwijl deze op hdmi4 staat
. Voordat je de tv aanzet moet het apparaat wat op hdmi4 is aangesloten aan staan (niet in slaapstand)
. De tv gaat dan autom. naar hdmi4
 
Ik zet altijd zowel de TV, als de decoder van Cisco uit.

Heb net de TV aangezet + Decoder en vervolgens de TV op HDMI gezet. Toen de TV weer uitgezet en de decoder AANGELATEN.

Bij het aanzetten van de TV stond die weer op EXT, oftewel niet meer op HD.
 
Laatst bewerkt:
Even om te testen...
Hetzelfde als je aangaf, maar dan de tv op de tv aanzetten (niet via de AB)
 
er is een functie die verstopt zit en die noemen ze "hotel-modus" daar kan je o.a aangeven op welke ingang hij moet staan als de tv opgestart word


hieronder staan een aantal voorbeelden van samsung maar je kan beter googlen op je eigen typenummer



How To Get into The Samsung Service Menu

You can use the Samsung service menu, for such things as resetting the digital tuner, a total factory reset and enabling/disabling hotel mode.

Method 1
Put TV on standby and then push in series these buttons on the remote: 'info, menu, mute, power' the TV will then turn itself on and display a menu.
Method 2
Turn the power off. On the remote, press Mute followed by 1, 8, 2, Power in sequence.
Method 3
With the TV in standby, press the {DISPLAY} {P.STD} {MUTE} {POWER} on the remote.
Method 4
With the TV in standby, press the {SLEEP} {P.STD} {MUTE} {POWER} on the remote.
Method 5
With the TV in standby, press the {DISPLAY} {MENU} {MUTE} {POWER} on the remote.
Method 6
With the TV in standby. On the remote, press Mute followed by 1, 1, 9, Enter in sequence.
Samsung LCD Monitor Service Menu Instructions

Power on the lcd monitor and open the OSD menu.
Set the Brightness and Contrast to 0.
Then press and hold the "SOURCE or ENTER" button for 5 second until the "SERVICE FUNCTION MENU" pop-up.

With the television turned off, press mute, 1, 8, 2, power on the remote. This will put you into the service menu. Be VERY careful! only change what you understand. Click down to Hotel Mode and change it to off.
 
Ook voor mij handig. Dank je voor de tip.
Gaat dan ook de volume beperking aan -net als in een hotel-
 
Status
Niet open voor verdere reacties.
Terug
Bovenaan Onderaan