WIN7 bevriest

[reduceme]

hallo

Ik heb vista update naar WIN7,alles werkt prima ook de updates ervan alles ok.
nu merk ik dat ik bv 10 minuten niet op de PC bezig bent dat hij bevriest,de muis werkt nog maar kan nergens meer op klikken, heb ook al eens geprobeerd om schermbeveiliging in te schakelen maar kreeg het zelfde resultaat.

Enig idee wat ik hier kan aan doen ?

Mvg

 

[vanschagen]

heeft het iets met de slaap stand te maken ?? optimalisatie staat hier
http://www.schoonepc.nl/windows7/optimale_windows7_instellingen.html

 

[reduceme]

heeft niet geholpen

 

[helghast001]

Is het een upgrade van je fabrikant bijvoorbeeld van HP, Acer etc. ?

Als dat zo is is het handig om de benodigde drivers te installeren. Als het niet van een fabrikant is dan moet je nagaan welke hardware je hebt in je PC of laptop, en de ontbrekende drivers daarvan installeren. Er zijn programma's ervoor.
Alleen ik ben hem nu even kwijt zodra ik die naam weer heb dan post ik het hier.

*EDIT: http://www.drivershq.com/ deze programma is er een van wat ik bedoel.

 

[reduceme]

JA

hij heeft fouten gevonden, maar dit is een PAYWARE programma,is er iets gratis?

want ik heb gaan zoeken naar een aantal nieuwe drivers maar ik durf die niet zelf instaleren,ik betrouw dit niet zo goed, en Driver Detective die doet dat voor jou....

 

[vanschagen]

deze is free http://www.devicedoctor.com/

 

[reduceme]

hoe installeer ik dit ?

het valt klein uit maar mss via SHIFT + SCROLL kan je het vergroten ,sorry

 

[helghast001]

Sorry hoor maar bij die device doctor krijg ik gewoon een .EXE bestand. Hier de download link voor de .EXE http://www.devicedoctor.com/download/DeviceDoctor_Bundle.exe

 

[reduceme]

wel als je na de scan het resultaat krijgt, zie je dat die update dat ik nodig heb voor mijn driver een zipfile is en ik weet niet hoe ik dat moet instaleren zie foto boven...

 

[helghast001]

ik zie een kladblok bestand raadpleeg die eens. of ga naar de website van de fabrikant. lukt het niet zeg het dan even hier.

 

[reduceme]

Dit staat in dat KLADBLOK

; Copyright (c) 2003-09 Intel Corporation
;#############################################################################
;#
;# Filename: TXTSETUP.OEM
;#
;#############################################################################
[Disks]
disk1 = "Intel(R) Matrix Storage Manager Driver", iaStor.sys, \

[Defaults]
scsi = iaStor_8ME9MEPCHM

;#############################################################################
[scsi]

; iaAHCI.inf
iaAHCI_ESB2 = "Intel(R) ESB2 SATA AHCI Controller"
iaAHCI_7RDH = "Intel(R) ICH7R/DH SATA AHCI Controller"
iaAHCI_7MMDH = "Intel(R) ICH7M/MDH SATA AHCI Controller"
iaAHCI_8RDHDO = "Intel(R) ICH8R/DH/DO SATA AHCI Controller"
iaAHCI_8MEM = "Intel(R) ICH8M-E/M SATA AHCI Controller"
iaAHCI_9RDODH = "Intel(R) ICH9R/DO/DH SATA AHCI Controller"
iaAHCI_9MEM = "Intel(R) ICH9M-E/M SATA AHCI Controller"
iaAHCI_10DDO = "Intel(R) ICH10D/DO SATA AHCI Controller"
iaAHCI_10R = "Intel(R) ICH10R SATA AHCI Controller"
iaAHCI_PCHM = "Intel(R) PCHM SATA AHCI Controller 4 Port"
iaAHCI_PCHM_1 = "Intel(R) PCHM SATA AHCI Controller 6 Port"
iaAHCI_PCH = "Intel(R) PCH SATA AHCI Controller"

; iaStor.inf
iaStor_ESB2 = "Intel(R) ESB2 SATA RAID Controller"
iaStor_7RDH = "Intel(R) ICH7R/DH SATA RAID Controller"
iaStor_7MDH = "Intel(R) ICH7MDH SATA RAID Controller"
iaStor_8R9R10RDOPCH = "Intel(R) ICH8R/ICH9R/ICH10R/DO/PCH SATA RAID Controller"
iaStor_8ME9MEPCHM = "Intel(R) ICH8M-E/ICH9M-E/PCHM SATA RAID Controller"

;#############################################################################

; iaAHCI.inf
[Files.scsi.iaAHCI_ESB2]
driver = disk1, iaStor.sys, iaStor
inf = disk1, iaAHCI.inf
catalog = disk1, iaAHCI.cat

[Files.scsi.iaAHCI_7RDH]
driver = disk1, iaStor.sys, iaStor
inf = disk1, iaAHCI.inf
catalog = disk1, iaAHCI.cat

[Files.scsi.iaAHCI_7MMDH]
driver = disk1, iaStor.sys, iaStor
inf = disk1, iaAHCI.inf
catalog = disk1, iaAHCI.cat

[Files.scsi.iaAHCI_8RDHDO]
driver = disk1, iaStor.sys, iaStor
inf = disk1, iaAHCI.inf
catalog = disk1, iaAHCI.cat

[Files.scsi.iaAHCI_8MEM]
driver = disk1, iaStor.sys, iaStor
inf = disk1, iaAHCI.inf
catalog = disk1, iaAHCI.cat

[Files.scsi.iaAHCI_9RDODH]
driver = disk1, iaStor.sys, iaStor
inf = disk1, iaAHCI.inf
catalog = disk1, iaAHCI.cat

[Files.scsi.iaAHCI_9MEM]
driver = disk1, iaStor.sys, iaStor
inf = disk1, iaAHCI.inf
catalog = disk1, iaAHCI.cat

[Files.scsi.iaAHCI_10DDO]
driver = disk1, iaStor.sys, iaStor
inf = disk1, iaAHCI.inf
catalog = disk1, iaAHCI.cat

[Files.scsi.iaAHCI_10R]
driver = disk1, iaStor.sys, iaStor
inf = disk1, iaAHCI.inf
catalog = disk1, iaAHCI.cat

[Files.scsi.iaAHCI_PCHM]
driver = disk1, iaStor.sys, iaStor
inf = disk1, iaAHCI.inf
catalog = disk1, iaAHCI.cat

[Files.scsi.iaAHCI_PCHM_1]
driver = disk1, iaStor.sys, iaStor
inf = disk1, iaAHCI.inf
catalog = disk1, iaAHCI.cat

[Files.scsi.iaAHCI_PCH]
driver = disk1, iaStor.sys, iaStor
inf = disk1, iaAHCI.inf
catalog = disk1, iaAHCI.cat


; iaStor.inf
[Files.scsi.iaStor_ESB2]
driver = disk1, iaStor.sys, iaStor
inf = disk1, iaStor.inf
catalog = disk1, iaStor.cat

[Files.scsi.iaStor_7RDH]
driver = disk1, iaStor.sys, iaStor
inf = disk1, iaStor.inf
catalog = disk1, iaStor.cat

[Files.scsi.iaStor_7MDH]
driver = disk1, iaStor.sys, iaStor
inf = disk1, iaStor.inf
catalog = disk1, iaStor.cat

[Files.scsi.iaStor_8R9R10RDOPCH]
driver = disk1, iaStor.sys, iaStor
inf = disk1, iaStor.inf
catalog = disk1, iaStor.cat

[Files.scsi.iaStor_8ME9MEPCHM]
driver = disk1, iaStor.sys, iaStor
inf = disk1, iaStor.inf
catalog = disk1, iaStor.cat


;#############################################################################
[Config.iaStor]
value = "", tag, REG_DWORD, 1b
value = "", ErrorControl, REG_DWORD, 1
value = "", Group, REG_SZ, "SCSI Miniport"
value = "", Start, REG_DWORD, 0
value = "", Type, REG_DWORD, 1

;#############################################################################

; iaAHCI.inf
[HardwareIds.scsi.iaAHCI_ESB2]
id = "PCI\VEN_8086&DEV_2681&CC_0106","iaStor"
#--The following lines give additional USB floppy support
id = "USB\VID_03F0&PID_2001", "usbstor" #--HP
id = "USB\VID_054C&PID_002C", "usbstor" #--Sony
id = "USB\VID_057B&PID_0001", "usbstor" #--Y-E Data
id = "USB\VID_0409&PID_0040", "usbstor" #--NEC
id = "USB\VID_0424&PID_0FDC", "usbstor" #--SMSC
id = "USB\VID_08BD&PID_1100", "usbstor" #--Iomega
id = "USB\VID_055D&PID_2020", "usbstor" #--Samsung
id = "USB\VID_03EE&PID_6901", "usbstor" #--Mitsumi

[HardwareIds.scsi.iaAHCI_7RDH]
id = "PCI\VEN_8086&DEV_27C1&CC_0106","iaStor"
#--The following lines give additional USB floppy support
id = "USB\VID_03F0&PID_2001", "usbstor" #--HP
id = "USB\VID_054C&PID_002C", "usbstor" #--Sony
id = "USB\VID_057B&PID_0001", "usbstor" #--Y-E Data
id = "USB\VID_0409&PID_0040", "usbstor" #--NEC
id = "USB\VID_0424&PID_0FDC", "usbstor" #--SMSC
id = "USB\VID_08BD&PID_1100", "usbstor" #--Iomega
id = "USB\VID_055D&PID_2020", "usbstor" #--Samsung
id = "USB\VID_03EE&PID_6901", "usbstor" #--Mitsumi

[HardwareIds.scsi.iaAHCI_7MMDH]
id = "PCI\VEN_8086&DEV_27C5&CC_0106","iaStor"
#--The following lines give additional USB floppy support
id = "USB\VID_03F0&PID_2001", "usbstor" #--HP
id = "USB\VID_054C&PID_002C", "usbstor" #--Sony
id = "USB\VID_057B&PID_0001", "usbstor" #--Y-E Data
id = "USB\VID_0409&PID_0040", "usbstor" #--NEC
id = "USB\VID_0424&PID_0FDC", "usbstor" #--SMSC
id = "USB\VID_08BD&PID_1100", "usbstor" #--Iomega
id = "USB\VID_055D&PID_2020", "usbstor" #--Samsung
id = "USB\VID_03EE&PID_6901", "usbstor" #--Mitsumi

[HardwareIds.scsi.iaAHCI_8RDHDO]
id = "PCI\VEN_8086&DEV_2821&CC_0106","iaStor"
#--The following lines give additional USB floppy support
id = "USB\VID_03F0&PID_2001", "usbstor" #--HP
id = "USB\VID_054C&PID_002C", "usbstor" #--Sony
id = "USB\VID_057B&PID_0001", "usbstor" #--Y-E Data
id = "USB\VID_0409&PID_0040", "usbstor" #--NEC
id = "USB\VID_0424&PID_0FDC", "usbstor" #--SMSC
id = "USB\VID_08BD&PID_1100", "usbstor" #--Iomega
id = "USB\VID_055D&PID_2020", "usbstor" #--Samsung
id = "USB\VID_03EE&PID_6901", "usbstor" #--Mitsumi

[HardwareIds.scsi.iaAHCI_8MEM]
id = "PCI\VEN_8086&DEV_2829&CC_0106","iaStor"
#--The following lines give additional USB floppy support
id = "USB\VID_03F0&PID_2001", "usbstor" #--HP
id = "USB\VID_054C&PID_002C", "usbstor" #--Sony
id = "USB\VID_057B&PID_0001", "usbstor" #--Y-E Data
id = "USB\VID_0409&PID_0040", "usbstor" #--NEC
id = "USB\VID_0424&PID_0FDC", "usbstor" #--SMSC
id = "USB\VID_08BD&PID_1100", "usbstor" #--Iomega
id = "USB\VID_055D&PID_2020", "usbstor" #--Samsung
id = "USB\VID_03EE&PID_6901", "usbstor" #--Mitsumi

[HardwareIds.scsi.iaAHCI_9RDODH]
id = "PCI\VEN_8086&DEV_2922&CC_0106","iaStor"
#--The following lines give additional USB floppy support
id = "USB\VID_03F0&PID_2001", "usbstor" #--HP
id = "USB\VID_054C&PID_002C", "usbstor" #--Sony
id = "USB\VID_057B&PID_0001", "usbstor" #--Y-E Data
id = "USB\VID_0409&PID_0040", "usbstor" #--NEC
id = "USB\VID_0424&PID_0FDC", "usbstor" #--SMSC
id = "USB\VID_08BD&PID_1100", "usbstor" #--Iomega
id = "USB\VID_055D&PID_2020", "usbstor" #--Samsung
id = "USB\VID_03EE&PID_6901", "usbstor" #--Mitsumi

[HardwareIds.scsi.iaAHCI_9MEM]
id = "PCI\VEN_8086&DEV_2929&CC_0106","iaStor"
#--The following lines give additional USB floppy support
id = "USB\VID_03F0&PID_2001", "usbstor" #--HP
id = "USB\VID_054C&PID_002C", "usbstor" #--Sony
id = "USB\VID_057B&PID_0001", "usbstor" #--Y-E Data
id = "USB\VID_0409&PID_0040", "usbstor" #--NEC
id = "USB\VID_0424&PID_0FDC", "usbstor" #--SMSC
id = "USB\VID_08BD&PID_1100", "usbstor" #--Iomega
id = "USB\VID_055D&PID_2020", "usbstor" #--Samsung
id = "USB\VID_03EE&PID_6901", "usbstor" #--Mitsumi

[HardwareIds.scsi.iaAHCI_10DDO]
id = "PCI\VEN_8086&DEV_3A02&CC_0106","iaStor"
#--The following lines give additional USB floppy support
id = "USB\VID_03F0&PID_2001", "usbstor" #--HP
id = "USB\VID_054C&PID_002C", "usbstor" #--Sony
id = "USB\VID_057B&PID_0001", "usbstor" #--Y-E Data
id = "USB\VID_0409&PID_0040", "usbstor" #--NEC
id = "USB\VID_0424&PID_0FDC", "usbstor" #--SMSC
id = "USB\VID_08BD&PID_1100", "usbstor" #--Iomega
id = "USB\VID_055D&PID_2020", "usbstor" #--Samsung
id = "USB\VID_03EE&PID_6901", "usbstor" #--Mitsumi

[HardwareIds.scsi.iaAHCI_10R]
id = "PCI\VEN_8086&DEV_3A22&CC_0106","iaStor"
#--The following lines give additional USB floppy support
id = "USB\VID_03F0&PID_2001", "usbstor" #--HP
id = "USB\VID_054C&PID_002C", "usbstor" #--Sony
id = "USB\VID_057B&PID_0001", "usbstor" #--Y-E Data
id = "USB\VID_0409&PID_0040", "usbstor" #--NEC
id = "USB\VID_0424&PID_0FDC", "usbstor" #--SMSC
id = "USB\VID_08BD&PID_1100", "usbstor" #--Iomega
id = "USB\VID_055D&PID_2020", "usbstor" #--Samsung
id = "USB\VID_03EE&PID_6901", "usbstor" #--Mitsumi


[HardwareIds.scsi.iaAHCI_PCHM]
id = "PCI\VEN_8086&DEV_3B29&CC_0106","iaStor"
#--The following lines give additional USB floppy support
id = "USB\VID_03F0&PID_2001", "usbstor" #--HP
id = "USB\VID_054C&PID_002C", "usbstor" #--Sony
id = "USB\VID_057B&PID_0001", "usbstor" #--Y-E Data
id = "USB\VID_0409&PID_0040", "usbstor" #--NEC
id = "USB\VID_0424&PID_0FDC", "usbstor" #--SMSC
id = "USB\VID_08BD&PID_1100", "usbstor" #--Iomega
id = "USB\VID_055D&PID_2020", "usbstor" #--Samsung
id = "USB\VID_03EE&PID_6901", "usbstor" #--Mitsumi

[HardwareIds.scsi.iaAHCI_PCHM_1]
id = "PCI\VEN_8086&DEV_3B2F&CC_0106","iaStor"
#--The following lines give additional USB floppy support
id = "USB\VID_03F0&PID_2001", "usbstor" #--HP
id = "USB\VID_054C&PID_002C", "usbstor" #--Sony
id = "USB\VID_057B&PID_0001", "usbstor" #--Y-E Data
id = "USB\VID_0409&PID_0040", "usbstor" #--NEC
id = "USB\VID_0424&PID_0FDC", "usbstor" #--SMSC
id = "USB\VID_08BD&PID_1100", "usbstor" #--Iomega
id = "USB\VID_055D&PID_2020", "usbstor" #--Samsung
id = "USB\VID_03EE&PID_6901", "usbstor" #--Mitsumi

[HardwareIds.scsi.iaAHCI_PCH]
id = "PCI\VEN_8086&DEV_3B22&CC_0106","iaStor"
#--The following lines give additional USB floppy support
id = "USB\VID_03F0&PID_2001", "usbstor" #--HP
id = "USB\VID_054C&PID_002C", "usbstor" #--Sony
id = "USB\VID_057B&PID_0001", "usbstor" #--Y-E Data
id = "USB\VID_0409&PID_0040", "usbstor" #--NEC
id = "USB\VID_0424&PID_0FDC", "usbstor" #--SMSC
id = "USB\VID_08BD&PID_1100", "usbstor" #--Iomega
id = "USB\VID_055D&PID_2020", "usbstor" #--Samsung
id = "USB\VID_03EE&PID_6901", "usbstor" #--Mitsumi


; iaStor.inf
[HardwareIds.scsi.iaStor_ESB2]
id = "PCI\VEN_8086&DEV_2682&CC_0104","iaStor"
#--The following lines give additional USB floppy support
id = "USB\VID_03F0&PID_2001", "usbstor" #--HP
id = "USB\VID_054C&PID_002C", "usbstor" #--Sony
id = "USB\VID_057B&PID_0001", "usbstor" #--Y-E Data
id = "USB\VID_0409&PID_0040", "usbstor" #--NEC
id = "USB\VID_0424&PID_0FDC", "usbstor" #--SMSC
id = "USB\VID_08BD&PID_1100", "usbstor" #--Iomega
id = "USB\VID_055D&PID_2020", "usbstor" #--Samsung
id = "USB\VID_03EE&PID_6901", "usbstor" #--Mitsumi

[HardwareIds.scsi.iaStor_7RDH]
id = "PCI\VEN_8086&DEV_27C3&CC_0104","iaStor"
#--The following lines give additional USB floppy support
id = "USB\VID_03F0&PID_2001", "usbstor" #--HP
id = "USB\VID_054C&PID_002C", "usbstor" #--Sony
id = "USB\VID_057B&PID_0001", "usbstor" #--Y-E Data
id = "USB\VID_0409&PID_0040", "usbstor" #--NEC
id = "USB\VID_0424&PID_0FDC", "usbstor" #--SMSC
id = "USB\VID_08BD&PID_1100", "usbstor" #--Iomega
id = "USB\VID_055D&PID_2020", "usbstor" #--Samsung
id = "USB\VID_03EE&PID_6901", "usbstor" #--Mitsumi

[HardwareIds.scsi.iaStor_7MDH]
id = "PCI\VEN_8086&DEV_27C6&CC_0104","iaStor"
#--The following lines give additional USB floppy support
id = "USB\VID_03F0&PID_2001", "usbstor" #--HP
id = "USB\VID_054C&PID_002C", "usbstor" #--Sony
id = "USB\VID_057B&PID_0001", "usbstor" #--Y-E Data
id = "USB\VID_0409&PID_0040", "usbstor" #--NEC
id = "USB\VID_0424&PID_0FDC", "usbstor" #--SMSC
id = "USB\VID_08BD&PID_1100", "usbstor" #--Iomega
id = "USB\VID_055D&PID_2020", "usbstor" #--Samsung
id = "USB\VID_03EE&PID_6901", "usbstor" #--Mitsumi

[HardwareIds.scsi.iaStor_8R9R10RDOPCH]
id = "PCI\VEN_8086&DEV_2822&CC_0104","iaStor"
#--The following lines give additional USB floppy support
id = "USB\VID_03F0&PID_2001", "usbstor" #--HP
id = "USB\VID_054C&PID_002C", "usbstor" #--Sony
id = "USB\VID_057B&PID_0001", "usbstor" #--Y-E Data
id = "USB\VID_0409&PID_0040", "usbstor" #--NEC
id = "USB\VID_0424&PID_0FDC", "usbstor" #--SMSC
id = "USB\VID_08BD&PID_1100", "usbstor" #--Iomega
id = "USB\VID_055D&PID_2020", "usbstor" #--Samsung
id = "USB\VID_03EE&PID_6901", "usbstor" #--Mitsumi

[HardwareIds.scsi.iaStor_8ME9MEPCHM]
id = "PCI\VEN_8086&DEV_282A&CC_0104","iaStor"
#--The following lines give additional USB floppy support
id = "USB\VID_03F0&PID_2001", "usbstor" #--HP
id = "USB\VID_054C&PID_002C", "usbstor" #--Sony
id = "USB\VID_057B&PID_0001", "usbstor" #--Y-E Data
id = "USB\VID_0409&PID_0040", "usbstor" #--NEC
id = "USB\VID_0424&PID_0FDC", "usbstor" #--SMSC
id = "USB\VID_08BD&PID_1100", "usbstor" #--Iomega
id = "USB\VID_055D&PID_2020", "usbstor" #--Samsung
id = "USB\VID_03EE&PID_6901", "usbstor" #--Mitsumi

 

[helghast001]

Hmm wat ik hier eruit kan halen is dat het om een harde schijf gaat. Zijn er andere dingen die je hebt geïnstalleerd soms? Als je misschien andere driver updates installeert kan het ook het probleem verhelpen, want naar mijn idee heeft het hier niet mee te maken. Verbeter me als ik het four heb maar download wel de andere updates.

Hoe kwam ik erachter> Google> TXTSETUP.OEM zip ingetypt en ik kwam er al gauw achter dat het om HDD's ging wat gaf jouw programma aan? Ging het om een HDD, processor of een grafische intel chip?

 

[reduceme]

Ik heb de Intel(R) ICH9 SATA AHCI Controller nodig , enig idee waar ik die vinden kan ?
heb het gedaan met Driver Detective en vond er één maar toen moest ik eerste betalen...
met Device Doctor vond hij er ook een en dat is een zipfile,heb foto hier boven al gezet ,zie ook kladbok,dus ik zit vast nu.....

Dit gaf hij aan Filename: Intel_RAIDAHCI_XPVistaWin7.zip

 

[reduceme]

Ik heb Driver Checker geïnstalleerd en zo de drivers geinstaleerd , alles werkt nu ,allemaal bedankt voor de hulp :thumb: