Merel@helpmij
Gebruiker
- Lid geworden
- 16 jul 2004
- Berichten
- 104
Hopend dat men op deze Kerst mij wel zal vergeven voor het Engels. Vermoedelijk hebben nederlandstaligen er weinig moeite mee dat ik de overtaalde tekst gebruik, welke ik naar HP zal versturen. Dank U en prettige feesten nog. :love:
According instructions on webpage
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&lang=en&cc=us&product=57769&dlc=en&docname=bpu02550
printing from “Notepad” to an USB printer should be no problem on PSC 750 in all Windows versions. This test was successful on my multi-boot PC using Windows 98 SE .
However this webpage tells us also this :
Most HP all-in-one products do not support printing from a DOS program.
Determine if the software is a Windows based program or a DOS based program
by checking the system requirements of the program.
I have a very old but very nice Dos program performing very well. It runs in the Dos window of Win-98SE, and output documents can be printed on my Deskjet_ 500, which is however remote on my inhouse network. This printer is connected via the serial port of the remote PC.
The big dissapointment
:
Running Windows98SE (especially installed for the still good working Dos-window)
I can't print from this Dos application on my HP-PSC 750 (usb connected).
I have been reading about the existence of USB drivers for Dos. Would this be of any help ?
I would very much appreciate any turnaround for this problem. There must be some way to print directly to the local USB printer HP-PSC-750 ? I welcome any suggestion. Thank you.
According instructions on webpage
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&lang=en&cc=us&product=57769&dlc=en&docname=bpu02550
printing from “Notepad” to an USB printer should be no problem on PSC 750 in all Windows versions. This test was successful on my multi-boot PC using Windows 98 SE .
However this webpage tells us also this :
Most HP all-in-one products do not support printing from a DOS program.
Determine if the software is a Windows based program or a DOS based program
by checking the system requirements of the program.
I have a very old but very nice Dos program performing very well. It runs in the Dos window of Win-98SE, and output documents can be printed on my Deskjet_ 500, which is however remote on my inhouse network. This printer is connected via the serial port of the remote PC.
The big dissapointment
: Running Windows98SE (especially installed for the still good working Dos-window)
I can't print from this Dos application on my HP-PSC 750 (usb connected).
I have been reading about the existence of USB drivers for Dos. Would this be of any help ?
I would very much appreciate any turnaround for this problem. There must be some way to print directly to the local USB printer HP-PSC-750 ? I welcome any suggestion. Thank you.
