Windows prestatie index probleem

Status
Niet open voor verdere reacties.

Windowsfaq

Terugkerende gebruiker
Lid geworden
1 jan 2010
Berichten
1.519
Ik heb een hp t3000 met intel p4 3,07ghz.

Hij werkt prima op w7.
Wanneer ik wpi uitvoer dan reageert de hdd heeel erg traag en hoor ik de hdd heel vreemd ratelen net of hij bijna stopt, het is ook dat pc voor 2sec compleet vast loopt en begint rustig verder met wpi uitvoeren.

Heb wel een score en blijkt dat de hdd de slechtste score heeft 2,7.
Terwijl het een NIEUWE hdd is!

Lijkt iets met de controler te zijn? Stond in event viewer.

Heb verschillende hdd probeert alle hdd het zelfde probleem

Wat kan dit zijn??
 
Wat voor harde schijf is het? Toevallig IDE? Kleine (in de zin van opslagruimte) harde schijf?
 
hij heeft het al weer goed gedaan maar krijg nu de melding ''windows experience index could not measure video playback performance error''

en dit is de log file:

Code:
\
038033 (0836) - winsat\logging.cpp:0815: --- START 2009\7\13 21:53:24 PM ---
038064 (0836) - winsat\main.cpp:4301: Command Line = "D:\Windows\system32\winsat.exe" moobe -cancelevent d8664637-bbd1-4343-8f97-96458fcd1015 -moobegoevent f6d21d93-fa3b-48ec-8c0b-2a438f4e6e9c
038079 (0836) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
038204 (0836) - winsat\main.cpp:4474: > IsFormal=TRUE  IsMoobe=TRUE.
038267 (0836) - winsat\main.cpp:4585: Watch dog system enabled
038267 (0836) - winsat\main.cpp:4592: Main watch dog timer set to 60.0 seconds
038610 (0836) - winsat\main.cpp:2505: > DWM not running.
039936 (0836) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
039951 (0836) - winsat\main.cpp:2793: > power policy saved.
040107 (0836) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
040123 (0836) - winsat\main.cpp:2814: > power policy set to maximum.
040591 (0836) - d3d\dx9misc.cpp:1030: HRESULT = 8876086a
040591 (0836) - d3d\dx9misc.cpp:1030: Error: Unable to create the D3D device
040607 (0836) - d3d\dx9misc.cpp:1030: Error: Unable to check the capabilities of the video card because a d3d device could not be created
040825 (0836) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
040841 (0836) - winsat\main.cpp:0948: > IsOfficial=TRUE  IsFormal=TRUE  IsMoobe=TRUE  RanOverTs=FALSE  RanOnbatteries=FALSE
040856 (0836) - winsat\main.cpp:1775: > Run Assessment features 
041761 (0836) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
041964 (0836) - d3d\graphicsop.cpp:0263: Driver is not WDDM; aborting assessment.
042385 (0836) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
042401 (0836) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
042494 (0836) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
042525 (0836) - winsat\processresults.cpp:1274: Limiting DWM Score to 1.0 - no DX9 capability
042525 (0836) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
042557 (0836) - winsat\main.cpp:0948: > IsOfficial=TRUE  IsFormal=TRUE  IsMoobe=TRUE  RanOverTs=FALSE  RanOnbatteries=FALSE
042728 (0836) - winsat\processresults.cpp:1274: Limiting DWM Score to 1.0 - no DX9 capability
042744 (0836) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
042759 (0836) - common\winsatutilities.cpp:1382: cannot access the winast API registry key; 2 The system cannot find the file specified.
042900 (0836) - winsat\main.cpp:2339: > Finalized MOOBE key
042947 (0836) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
042962 (0836) - winsat\main.cpp:2855: > Power state restored.
042978 (0836) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
043087 (0836) - winsat\main.cpp:2899: INFO: DwmpRestartComposition() did not return OK!
043103 (0836) - winsat\watchdog.cpp:0311: Watch dog system shutdown
043118 (0836) - winsat\main.cpp:4909: > exit value = 0.
022167 (0828) - winsat\logging.cpp:0815: --- START 2010\11\20 12:56:38 PM ---
022198 (0828) - winsat\main.cpp:4301: Command Line = "D:\Windows\system32\winsat.exe" moobe -cancelevent 31d684b3-171e-4765-bcaa-633f1cefd679 -moobegoevent 30375009-46cb-4a48-b004-38ff8dece083
022214 (0828) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
022323 (0828) - winsat\main.cpp:4474: > IsFormal=TRUE  IsMoobe=TRUE.
022370 (0828) - winsat\main.cpp:4585: Watch dog system enabled
022370 (0828) - winsat\main.cpp:4592: Main watch dog timer set to 60.0 seconds
022620 (0828) - winsat\main.cpp:2505: > DWM not running.
023556 (0828) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
023556 (0828) - winsat\main.cpp:2793: > power policy saved.
023696 (0828) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
023696 (0828) - winsat\main.cpp:2814: > power policy set to maximum.
024180 (0828) - d3d\dx9misc.cpp:1030: HRESULT = 8876086a
024195 (0828) - d3d\dx9misc.cpp:1030: Error: Unable to create the D3D device
024195 (0828) - d3d\dx9misc.cpp:1030: Error: Unable to check the capabilities of the video card because a d3d device could not be created
024398 (0828) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
024414 (0828) - winsat\main.cpp:0948: > IsOfficial=TRUE  IsFormal=TRUE  IsMoobe=TRUE  RanOverTs=FALSE  RanOnbatteries=FALSE
024429 (0828) - winsat\main.cpp:1775: > Run Assessment features 
024928 (0828) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
025131 (0828) - d3d\graphicsop.cpp:0263: Driver is not WDDM; aborting assessment.
025506 (0828) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
025521 (0828) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
025584 (0828) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
025584 (0828) - winsat\processresults.cpp:1274: Limiting DWM Score to 1.0 - no DX9 capability
025599 (0828) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
025615 (0828) - winsat\main.cpp:0948: > IsOfficial=TRUE  IsFormal=TRUE  IsMoobe=TRUE  RanOverTs=FALSE  RanOnbatteries=FALSE
025771 (0828) - winsat\processresults.cpp:1274: Limiting DWM Score to 1.0 - no DX9 capability
025786 (0828) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
025786 (0828) - common\winsatutilities.cpp:1388: The error count is zero becuase the TaskErrorCount value does not exist.
025896 (0828) - winsat\main.cpp:2339: > Finalized MOOBE key
025942 (0828) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
025942 (0828) - winsat\main.cpp:2855: > Power state restored.
025958 (0828) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
026067 (0828) - winsat\main.cpp:2899: INFO: DwmpRestartComposition() did not return OK!
026083 (0828) - winsat\watchdog.cpp:0311: Watch dog system shutdown
026083 (0828) - winsat\main.cpp:4909: > exit value = 0.
038484 (0760) - winsat\logging.cpp:0815: --- START 2013\7\13 20:11:09 ---
038515 (0760) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" moobe -cancelevent 1608608c-540d-43f2-bfe1-5e79aee92ffa -moobegoevent e424871f-2591-4338-a0ef-dceaf4bb8524
038515 (0760) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
038640 (0760) - winsat\main.cpp:4474: > IsFormal=TRUE  IsMoobe=TRUE.
038703 (0760) - winsat\main.cpp:4585: Watch dog system enabled
038703 (0760) - winsat\main.cpp:4592: Main watch dog timer set to 60.0 seconds
038937 (0760) - winsat\main.cpp:2505: > DWM not running.
041218 (0760) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
041218 (0760) - winsat\main.cpp:2793: > power policy saved.
041468 (0760) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
041468 (0760) - winsat\main.cpp:2814: > power policy set to maximum.
042078 (0760) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
042078 (0760) - winsat\main.cpp:0948: > IsOfficial=TRUE  IsFormal=TRUE  IsMoobe=TRUE  RanOverTs=FALSE  RanOnbatteries=FALSE
042093 (0760) - winsat\main.cpp:1775: > Run Assessment features 
043312 (0760) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
060031 (0760) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 2212350
060031 (0760) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
060125 (0760) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 2212350
060125 (0760) - winsat\processresults.cpp:1241: Skipping Graphics video playback time limit check.
060125 (0760) - winsat\processresults.cpp:1253: Skipping StdDefPlayback limit check.
060125 (0760) - winsat\processresults.cpp:1265: Skipping StdDefPlayback limit check.
060125 (0760) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
060140 (0760) - winsat\main.cpp:0948: > IsOfficial=TRUE  IsFormal=TRUE  IsMoobe=TRUE  RanOverTs=FALSE  RanOnbatteries=FALSE
060312 (0760) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
060312 (0760) - common\winsatutilities.cpp:1388: The error count is zero becuase the TaskErrorCount value does not exist.
060468 (0760) - winsat\main.cpp:2339: > Finalized MOOBE key
060531 (0760) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
060531 (0760) - winsat\main.cpp:2855: > Power state restored.
060531 (0760) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
060671 (0760) - winsat\main.cpp:2899: INFO: DwmpRestartComposition() did not return OK!
060687 (0760) - winsat\watchdog.cpp:0311: Watch dog system shutdown
060687 (0760) - winsat\main.cpp:4909: > exit value = 0.
265046 (3032) - winsat\logging.cpp:0815: --- START 2013\7\13 18:14:50 ---
265046 (3032) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent 68f141b5-9b24-49be-99b0-d732de4d7b03
265046 (3032) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
265500 (3032) - winsat\main.cpp:4474: > IsFormal=TRUE  IsMoobe=FALSE.
265562 (3032) - winsat\main.cpp:4585: Watch dog system enabled
265562 (3032) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
265812 (3032) - winsat\main.cpp:2490: > DWM Running.
266109 (3032) - winsat\main.cpp:2497: > turning off DWM.
266125 (3032) - winsat\main.cpp:2470: > EMD service will be restored on exit.
268687 (3032) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
268687 (3032) - winsat\main.cpp:2793: > power policy saved.
269421 (3032) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
269421 (3032) - winsat\main.cpp:2814: > power policy set to maximum.
270312 (3032) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
270328 (3032) - winsat\main.cpp:0948: > IsOfficial=TRUE  IsFormal=TRUE  IsMoobe=FALSE  RanOverTs=FALSE  RanOnbatteries=FALSE
270359 (3032) - winsat\main.cpp:1775: > Run Assessment features 
270812 (3032) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
279906 (3032) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
288796 (3032) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
298437 (3032) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
309265 (3032) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
309265 (3032) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
309265 (3032) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
309265 (3032) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
309265 (3032) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
309281 (3032) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
309281 (3032) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
309281 (3032) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
309281 (3032) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
309281 (3032) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
309281 (3032) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
309281 (3032) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
309296 (3032) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
309296 (3032) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
309296 (3032) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
313937 (3032) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
322937 (3032) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_VC1_15mbps.wmv -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
336578 (3032) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_480i_5sec_6mbps_new.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
345062 (3032) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_480p_5sec_6mbps_new.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
355375 (3032) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_10mbps_h264.mp4 -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
379937 (3032) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_480_5sec_6mbps_h264.mp4 -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
391281 (3032) - winsat\main.cpp:1775: > Run Assessment media -input C:\Windows\Performance\WinSAT\winsatencode.wmv -encode C:\Windows\Performance\WinSAT\winsat.prx
414812 (3032) - winsat\main.cpp:1775: > Run Assessment moobego 
414828 (3032) - winsat\main.cpp:1775: > Run Assessment cpu -encryption -up
425453 (3032) - winsat\main.cpp:1775: > Run Assessment cpu -compression -up
435890 (3032) - winsat\main.cpp:1775: > Run Assessment cpu -encryption2 -up
446171 (3032) - winsat\main.cpp:1775: > Run Assessment cpu -compression2 -up
456421 (3032) - winsat\main.cpp:1775: > Run Assessment cpu -encryption
466484 (3032) - winsat\main.cpp:1775: > Run Assessment cpu -compression
476671 (3032) - winsat\main.cpp:1775: > Run Assessment cpu -encryption2
487000 (3032) - winsat\main.cpp:1775: > Run Assessment cpu -compression2
497406 (3032) - winsat\main.cpp:1775: > Run Assessment mem 
499656 (3032) - winsat\main.cpp:1775: > Run Assessment disk -seq -read -n 0
529109 (3032) - winsat\main.cpp:1775: > Run Assessment disk -ran -read -n 0
548015 (3032) - winsat\main.cpp:1775: > Run Assessment disk -scen 2009 -drive C:
646468 (3032) - winsat\processresults.cpp:0962: > Wrote cpu expression compression score to the registry 130
646468 (3032) - winsat\processresults.cpp:1004: Total physical mem available to the OS : 1,49 GB (1.610.014.720 bytes)
646468 (3032) - winsat\processresults.cpp:1086: Physical memory available to the OS is less than or equal to 1.5GB : limit mem score to 4.5
646468 (3032) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 530
646468 (3032) - winsat\processresults.cpp:1498: > Wrote random read disk score to the registry 1402
646468 (3032) - winsat\processresults.cpp:4371: The Disk Responsiveness Metric is being capped
646500 (3032) - winsat\main.cpp:0948: > IsOfficial=TRUE  IsFormal=TRUE  IsMoobe=FALSE  RanOverTs=FALSE  RanOnbatteries=FALSE
647015 (3032) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 2212350
647046 (3032) - winsat\processresults.cpp:0962: > Wrote cpu expression compression score to the registry 130
647046 (3032) - winsat\processresults.cpp:1004: Total physical mem available to the OS : 1,49 GB (1.610.014.720 bytes)
647046 (3032) - winsat\processresults.cpp:1086: Physical memory available to the OS is less than or equal to 1.5GB : limit mem score to 4.5
647046 (3032) - winsat\processresults.cpp:1253: Skipping StdDefPlayback limit check.
647046 (3032) - winsat\processresults.cpp:1265: Skipping StdDefPlayback limit check.
647062 (3032) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 530
647062 (3032) - winsat\processresults.cpp:1498: > Wrote random read disk score to the registry 1402
647062 (3032) - winsat\processresults.cpp:4371: The Disk Responsiveness Metric is being capped
647437 (3032) - common\winsatutilities.cpp:1388: The error count is zero becuase the TaskErrorCount value does not exist.
647750 (3032) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
647750 (3032) - winsat\main.cpp:2855: > Power state restored.
647750 (3032) - winsat\main.cpp:2870: > Successfully reenabled EMD.
647921 (3032) - winsat\watchdog.cpp:0311: Watch dog system shutdown
647921 (3032) - winsat\main.cpp:4909: > exit value = 0.
1969796 (3052) - winsat\logging.cpp:0815: --- START 2013\7\13 18:43:14 ---
1969859 (3052) - winsat\main.cpp:4301: Command Line = C:\Windows\system32\winsat.exe formal -log -cancelevent 40f1ede7-5a05-4d69-8d03-ef5bbca3b757
1969875 (3052) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
1970203 (3052) - winsat\main.cpp:4474: > IsFormal=TRUE  IsMoobe=FALSE.
1970250 (3052) - winsat\main.cpp:4585: Watch dog system enabled
1970250 (3052) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
1970859 (3052) - winsat\main.cpp:2490: > DWM Running.
1971343 (3052) - winsat\main.cpp:2497: > turning off DWM.
1975484 (3052) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
1975515 (3052) - winsat\main.cpp:2793: > power policy saved.
1976203 (3052) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
1976234 (3052) - winsat\main.cpp:2814: > power policy set to maximum.
1976703 (3052) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
1976750 (3052) - winsat\main.cpp:0948: > IsOfficial=TRUE  IsFormal=TRUE  IsMoobe=FALSE  RanOverTs=FALSE  RanOnbatteries=FALSE
1976781 (3052) - winsat\main.cpp:1775: > Run Assessment features 
1977109 (3052) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
1994078 (3052) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 2260180
1994078 (3052) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
1994078 (3052) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
2001953 (3052) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
2009578 (3052) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
2018000 (3052) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
2027000 (3052) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
2027015 (3052) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
2027015 (3052) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
2027015 (3052) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
2027015 (3052) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
2027015 (3052) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
2027015 (3052) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
2027015 (3052) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
2027015 (3052) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
2027015 (3052) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
2027031 (3052) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
2027031 (3052) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
2027031 (3052) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
2027031 (3052) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
2027031 (3052) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
2030671 (3052) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
2038421 (3052) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_VC1_15mbps.wmv -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
3513296 (1728) - winsat\logging.cpp:0815: --- START 2013\7\13 19:47:12 ---
3513312 (1728) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent a454ce1f-3ada-47f2-9e38-052863b6817e
3513312 (1728) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
3513500 (1728) - winsat\main.cpp:4474: > IsFormal=TRUE  IsMoobe=FALSE.
3513546 (1728) - winsat\main.cpp:4585: Watch dog system enabled
3513546 (1728) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
3513968 (1728) - winsat\main.cpp:2490: > DWM Running.
3514484 (1728) - winsat\main.cpp:2497: > turning off DWM.
3515000 (1728) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
3515078 (1728) - winsat\main.cpp:2793: > power policy saved.
3515375 (1728) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
3515375 (1728) - winsat\main.cpp:2814: > power policy set to maximum.
3515718 (1728) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
3515718 (1728) - winsat\main.cpp:0948: > IsOfficial=TRUE  IsFormal=TRUE  IsMoobe=FALSE  RanOverTs=FALSE  RanOnbatteries=FALSE
3515718 (1728) - winsat\main.cpp:1775: > Run Assessment features 
3516093 (1728) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
3535703 (1728) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 2204250
3535703 (1728) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
3535703 (1728) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
3544328 (1728) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
3552765 (1728) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
3562390 (1728) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
3572640 (1728) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
3572640 (1728) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
3572640 (1728) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
3572640 (1728) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
3572640 (1728) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
3572640 (1728) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
3572687 (1728) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
3572687 (1728) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
3572687 (1728) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
3572687 (1728) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
3572687 (1728) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
3572687 (1728) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
3572718 (1728) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
3572718 (1728) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
3572718 (1728) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
3576734 (1728) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
3584171 (1728) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_VC1_15mbps.wmv -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog
3626078 (1728) - common\testoutputstreams.h:0072: ERROR: MEError event recieved; error encountered in MF pipeline.
3627218 (1728) - common\testoutputstreams.h:0072: ERROR: Win32 exception thrown: mfplayer.cpp @ 614 (Media Foundation: playback): MEError event recieved -- error in MF pipeline (code 0xc00d36b4)
3627218 (1728) - winsat\main.cpp:2056: > mediaex Assessment FAILED due to an error
3627218 (1728) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 2204250
3627250 (1728) - winsat\processresults.cpp:1253: Skipping StdDefPlayback limit check.
3627250 (1728) - winsat\processresults.cpp:1265: Skipping StdDefPlayback limit check.
3627250 (1728) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
3627359 (1728) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
3627359 (1728) - winsat\main.cpp:2855: > Power state restored.
3627390 (1728) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
3627546 (1728) - winsat\main.cpp:2896: > Composition restarted
3627546 (1728) - winsat\watchdog.cpp:0311: Watch dog system shutdown
3627546 (1728) - winsat\main.cpp:4909: > exit value = 1.
3783578 (3464) - winsat\logging.cpp:0815: --- START 2013\7\13 19:51:42 ---
3783578 (3464) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent 70ee0776-7c98-4ed5-9296-dd12a95be72f
3783578 (3464) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
3783750 (3464) - winsat\main.cpp:4474: > IsFormal=TRUE  IsMoobe=FALSE.
3783796 (3464) - winsat\main.cpp:4585: Watch dog system enabled
3783796 (3464) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
3784234 (3464) - winsat\main.cpp:2490: > DWM Running.
3784578 (3464) - winsat\main.cpp:2497: > turning off DWM.
3785484 (3464) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
3785484 (3464) - winsat\main.cpp:2793: > power policy saved.
3785718 (3464) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
3785734 (3464) - winsat\main.cpp:2814: > power policy set to maximum.
3790015 (3464) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
3790015 (3464) - winsat\main.cpp:0948: > IsOfficial=TRUE  IsFormal=TRUE  IsMoobe=FALSE  RanOverTs=FALSE  RanOnbatteries=FALSE
3790015 (3464) - winsat\main.cpp:1775: > Run Assessment features 
3790343 (3464) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
3836968 (3464) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
3836968 (3464) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
3836968 (3464) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
3837812 (3464) - d3d\dx9misc.cpp:1030: HRESULT = 8876086c
3837812 (3464) - d3d\dx9misc.cpp:1030: Error: Unable to create the D3D device
3837812 (3464) - d3d\dx9misc.cpp:1030: Error: Unable to check the capabilities of the video card because a d3d device could not be created
3838656 (3464) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
3839421 (3464) - d3d\dx9misc.cpp:1030: HRESULT = 8876086c
3839421 (3464) - d3d\dx9misc.cpp:1030: Error: Unable to create the D3D device
3839421 (3464) - d3d\dx9misc.cpp:1030: Error: Unable to check the capabilities of the video card because a d3d device could not be created
3840187 (3464) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
3840984 (3464) - d3d\dx9misc.cpp:1030: HRESULT = 8876086c
3840984 (3464) - d3d\dx9misc.cpp:1030: Error: Unable to create the D3D device
3840984 (3464) - d3d\dx9misc.cpp:1030: Error: Unable to check the capabilities of the video card because a d3d device could not be created
3841796 (3464) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
3842656 (3464) - d3d\dx9misc.cpp:1030: HRESULT = 8876086c
3842656 (3464) - d3d\dx9misc.cpp:1030: Error: Unable to create the D3D device
3842656 (3464) - d3d\dx9misc.cpp:1030: Error: Unable to check the capabilities of the video card because a d3d device could not be created
3843468 (3464) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
3843468 (3464) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
3843468 (3464) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
3843468 (3464) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
3843468 (3464) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
3843468 (3464) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
3843500 (3464) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
3843500 (3464) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
3843500 (3464) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
3843515 (3464) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
3843515 (3464) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
3843515 (3464) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
3843515 (3464) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
3843515 (3464) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.
3843515 (3464) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
3853593 (3464) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 1556: 0x800705b4 == ERROR_TIMEOUT
3853593 (3464) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 1280: 0x800705b4 == ERROR_TIMEOUT
3853593 (3464) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 389: 0x800705b4 == ERROR_TIMEOUT
3853593 (3464) - media\mediaerror.cpp:0095: Error: Could not build a topology to decode the input file.
3855718 (3464) - winsat\main.cpp:2056: > mfmedia Assessment FAILED due to an error
3855750 (3464) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
3855750 (3464) - winsat\processresults.cpp:1274: Limiting DWM Score to 1.0 - no DWM performance score
3855750 (3464) - winsat\processresults.cpp:1405: WDDM present, holding D3D score at 2.0
3855765 (3464) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
3855906 (3464) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
3855906 (3464) - winsat\main.cpp:2855: > Power state restored.
3855906 (3464) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.
3856046 (3464) - winsat\main.cpp:2896: > Composition restarted
3856046 (3464) - winsat\watchdog.cpp:0311: Watch dog system shutdown
3856046 (3464) - winsat\main.cpp:4909: > exit value = 1.

wat kan dit zijn??:confused:
 
Laatst bewerkt door een moderator:
Hij lijkt dus problemen te hebben met je videokaart. Heb je een externe videokaart, of gebruik je de onboard kaart? Heb je alle drivers geïnstalleerd, probeer ze (van je videokaart) eens te verwijderen en te herinstalleren.
 
Ik heb zelf hier ook een pc met videokaart zonder driver, maar je merkt duidelijk verschillen met dezelfde pc mét driver (om een of andere reden had ik de driver verwijderd...). Hetzelfde geldt voor een gebroken driver, daar kan je alleen ook nog Blue Sceens krijgen.
 
Driver is geinstalleerd, zelf alle laatste driver zijn geinstalleerd.

Maar vreemd genoeg deed wei het gisteravond wél. Vreemd :/
Maar goed.

videokaart is dus wel kapot.
 
Laatst bewerkt:
Status
Niet open voor verdere reacties.
Terug
Bovenaan Onderaan