ik heb een cd-brander en een dvd brander. en gebruik nero burning rom 6.
Ik kan makkelijk cd'tjes branden. De computer noemt de cd brander ook gewoon bij naam, het is een samsung.
Maar de dvd-brander doet het niet meer. Via het progje ''everest'' krijg ik de volgende gegevens erover:
[ DVDRW IDE1004 ]
Apparaateigenschappen:
Soort Besturingssoftware DVDRW IDE1004
Datum Besturingssoftware 1-7-2001
Versie Besturingssoftware 5.1.2535.0
Provider Besturingssoftware Microsoft
INF-Bestand cdrom.inf
nu ik verder lees staat er:
Eigenschappen Optische Stations:
Fabrikant BTC
Apparaattype DVD+RW/DVD-RW
Snelheid DVD+RW:4x/4x, DVD-RW:4x/2x, DVD-ROM:12x, CD:40x/24x/40x
Apparaatfabrikant:
Firmanaam Behavior Tech Computer Corp.
Als ik ga branden, zegt Nero altijd "could not start disk at once".
Het is alsof de brander stuk is.
de log van Nero staat hieronder...
wie weet raad?
alvast dank,
Jochanan
Jochanan Westra
jochanan
1A23-0609-9130-2320-8927-0959
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10-9-1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22-7-2004 17:33:44
Nero version: 6.3.1.25
Recorder: <DVDRW IDE1004> Version: 0040 - HA 0 TA 2 - 6.3.1.25
Adapter driver: <nvatabus> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <DVDRW IDE1004 >Version: 0040 - HA 0 TA 2 - 6.3.1.25
Adapter driver: <nvatabus> HA 0
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JB-00DUA3 nvatabus Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6E040L0 nvatabus Port 0 ID 1 DMA: Off
CdRomPeripheral : DVDRW IDE1004 nvatabus Port 0 ID 2 DMA: Off
CdRomPeripheral : SAMSUNG CD-R/RW SW-240B nvatabus Port 0 ID 3 DMA: Off
=== CDRom-Device-Map ===
DVDRW IDE1004 D: CDRom0
SAMSUNG CD-R/RW SW-240B E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 201MB (206268kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.8.2006
UDF compilation
12:00:18 #1 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:00:21 #2 Text 0 File Reader.cpp, Line 126
Reader running
12:00:26 #3 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media
12:00:27 #4 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2291743 (509:16.43, 4476MB)
12:00:27 #5 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
12:00:27 #6 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: DVDRW IDE1004, Media type: DVD+R
Disc Manufacturer ID: DAXON, Media Type ID: AZ2, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
12:00:27 #7 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:00:27 #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2291744 (2291744) = #2291744/509:16.44
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2291744 blocks [DVDRW IDE1004 ]
--------------------------------------------------------------
12:00:37 #9 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [DVDRW IDE1004 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4693491712, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2291744 | lead-out | 1 | 0x00 | 0x41
12:00:38 #10 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started
12:01:40 #11 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
12:01:40 #12 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed
12:01:40 #13 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 1x (1.385 KB/s)
12:01:41 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:01:41 #15 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: DAXON...
Media type ID: AZ2
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 44 41 58 4F 4E - 00 00 00 41 5A 32 00 38 ...DAXON...AZ2.8
23 54 37 11 00 56 71 00 - BE 6B 15 15 0B 0B 08 08 #T7..Vq..k......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
12:02:17 #16 CDR -1207 File DVDR.cpp, Line 4509
Book Type automatically set to: DVD-ROM
12:02:17 #17 SCSI -1196 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 0, TA 2, LUN 0, buffer 0x03547000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x3A 0x02
12:02:17 #18 SCSI -1196 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 0, TA 2, LUN 0, buffer 0x03547000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
CDB Data: 0x52 0x01 0x00 0x00 0x00 0xFF 0x00 0x00 0x1C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x3A 0x02
12:02:17 #19 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 57:03,801 (3423801ms) -> OK
12:02:17 #20 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes
12:02:17 #21 CDR -1196 File ThreadedTransferInterface.cpp, Line 1614
Disc not present - tray open
12:02:17 #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614
Could not perform start of Disc-at-once
12:02:17 #23 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
12:02:17 #24 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 1x (1.385 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10-9-1999 12:06:00
File 'Drivers\InCDfs.SYS': Ver=5, 1, 0, 9, size=102656 bytes, created 30-5-2006 15:18:18 (InCD4 driver for win NT/2K/XP)
File 'Drivers\nvatabus.sys': Ver=5.10.2600.0552 built by: WinDDK, size=93568 bytes, created 18-8-2005 17:52:06 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Ik kan makkelijk cd'tjes branden. De computer noemt de cd brander ook gewoon bij naam, het is een samsung.
Maar de dvd-brander doet het niet meer. Via het progje ''everest'' krijg ik de volgende gegevens erover:
[ DVDRW IDE1004 ]
Apparaateigenschappen:
Soort Besturingssoftware DVDRW IDE1004
Datum Besturingssoftware 1-7-2001
Versie Besturingssoftware 5.1.2535.0
Provider Besturingssoftware Microsoft
INF-Bestand cdrom.inf
nu ik verder lees staat er:
Eigenschappen Optische Stations:
Fabrikant BTC
Apparaattype DVD+RW/DVD-RW
Snelheid DVD+RW:4x/4x, DVD-RW:4x/2x, DVD-ROM:12x, CD:40x/24x/40x
Apparaatfabrikant:
Firmanaam Behavior Tech Computer Corp.
Als ik ga branden, zegt Nero altijd "could not start disk at once".
Het is alsof de brander stuk is.
de log van Nero staat hieronder...
wie weet raad?
alvast dank,
Jochanan
Jochanan Westra
jochanan
1A23-0609-9130-2320-8927-0959
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10-9-1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22-7-2004 17:33:44
Nero version: 6.3.1.25
Recorder: <DVDRW IDE1004> Version: 0040 - HA 0 TA 2 - 6.3.1.25
Adapter driver: <nvatabus> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <DVDRW IDE1004 >Version: 0040 - HA 0 TA 2 - 6.3.1.25
Adapter driver: <nvatabus> HA 0
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JB-00DUA3 nvatabus Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6E040L0 nvatabus Port 0 ID 1 DMA: Off
CdRomPeripheral : DVDRW IDE1004 nvatabus Port 0 ID 2 DMA: Off
CdRomPeripheral : SAMSUNG CD-R/RW SW-240B nvatabus Port 0 ID 3 DMA: Off
=== CDRom-Device-Map ===
DVDRW IDE1004 D: CDRom0
SAMSUNG CD-R/RW SW-240B E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 201MB (206268kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.8.2006
UDF compilation
12:00:18 #1 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:00:21 #2 Text 0 File Reader.cpp, Line 126
Reader running
12:00:26 #3 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media
12:00:27 #4 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2291743 (509:16.43, 4476MB)
12:00:27 #5 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
12:00:27 #6 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: DVDRW IDE1004, Media type: DVD+R
Disc Manufacturer ID: DAXON, Media Type ID: AZ2, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
12:00:27 #7 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:00:27 #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2291744 (2291744) = #2291744/509:16.44
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2291744 blocks [DVDRW IDE1004 ]
--------------------------------------------------------------
12:00:37 #9 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [DVDRW IDE1004 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4693491712, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2291744 | lead-out | 1 | 0x00 | 0x41
12:00:38 #10 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started
12:01:40 #11 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
12:01:40 #12 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed
12:01:40 #13 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 1x (1.385 KB/s)
12:01:41 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:01:41 #15 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: DAXON...
Media type ID: AZ2
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 44 41 58 4F 4E - 00 00 00 41 5A 32 00 38 ...DAXON...AZ2.8
23 54 37 11 00 56 71 00 - BE 6B 15 15 0B 0B 08 08 #T7..Vq..k......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
12:02:17 #16 CDR -1207 File DVDR.cpp, Line 4509
Book Type automatically set to: DVD-ROM
12:02:17 #17 SCSI -1196 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 0, TA 2, LUN 0, buffer 0x03547000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x3A 0x02
12:02:17 #18 SCSI -1196 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 0, TA 2, LUN 0, buffer 0x03547000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
CDB Data: 0x52 0x01 0x00 0x00 0x00 0xFF 0x00 0x00 0x1C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x3A 0x02
12:02:17 #19 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 57:03,801 (3423801ms) -> OK
12:02:17 #20 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes
12:02:17 #21 CDR -1196 File ThreadedTransferInterface.cpp, Line 1614
Disc not present - tray open
12:02:17 #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614
Could not perform start of Disc-at-once
12:02:17 #23 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
12:02:17 #24 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 1x (1.385 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10-9-1999 12:06:00
File 'Drivers\InCDfs.SYS': Ver=5, 1, 0, 9, size=102656 bytes, created 30-5-2006 15:18:18 (InCD4 driver for win NT/2K/XP)
File 'Drivers\nvatabus.sys': Ver=5.10.2600.0552 built by: WinDDK, size=93568 bytes, created 18-8-2005 17:52:06 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
