brander kapot?

Status
Niet open voor verdere reacties.
verstraeten

verstraeten

Gebruiker
Lid geworden
9 nov 2004
Berichten
243
hoi

ik wilde vandaag een cd kopieeren maar kreeg in nero 7 een schrijffout na ong 10%.
ik heb met andere cd's geprobeerd maar juist hetzelfde.
heb het nog eens met alcohol 120% geprobeerd maar daar kreeg ik een foutmelding na ong 90%.
waar zou dit aan kunnen liggen? of is mijn brander naar de haaien?

alvast bedankt
 
't zou wel handig zijn om te vermelden WELKE schrijffout Nero aangaf.
 
ik krijg bij nero gewoon een schrijffout meer geeft hij niet.
er wordt wel een logje gemaakt maar daar snap ik niet veel van.
 
Michael
thuis
5C80001080100000000832094618
*5C80001080100000000832094618

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32

NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2

Recorder: <BENQ DVD DD DW1620> Version: B7H9 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <BENQ DVD DD DW1620 >Version: B7H9 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y060L0 IdeChnDr Port 0 ID 0 DMA: On
DiskPeripheral : WDC AC310000R IdeChnDr Port 0 ID 1 DMA: Off
CdRomPeripheral : BENQ DVD DD DW1620 IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC CD-ROM CD-3002A IdeChnDr Port 1 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 2 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 3 DMA: Off

=== CDRom-Device-Map ===
_NEC CD-ROM CD-3002A F: CDRom1
BENQ DVD DD DW1620 G: CDRom0
Generic DVD-ROM H: CDRom2
Generic DVD-ROM I: CDRom3
Generic DVD-ROM J: CDRom4
Generic DVD-ROM K: CDRom5
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 1
BUFE : 0
Physical memory : 767MB (785888kB)
Free physical memory: 430MB (441128kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

4.3.2006
Cd-rom (ISO)
18:20:37 #1 SPTI -1033 File SCSIPassThrough.cpp, Line 323
G: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 12 00 00 00 00 04 01

18:21:37 #2 Text 0 File Isodoc.cpp, Line 6411
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

18:21:37 #3 Text 0 File Burncd.cpp, Line 3008
BENQ DVD DD DW1620
Seamless Link geactiveerd

18:21:37 #4 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory

18:21:37 #5 Text 0 File Reader.cpp, Line 124
Reader running

18:21:37 #6 Text 0 File Writer.cpp, Line 113
Writer G: BENQ DVD DD DW1620 running

18:21:37 #7 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

18:21:37 #8 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using CD-R/RW media

18:23:03 #9 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 332360 ( 73:53.35)

18:23:03 #10 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

18:23:04 #11 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: BENQ DVD DD DW1620

18:23:04 #12 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc not writeable. Insert writeable disc.
(Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)

18:23:04 #13 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 332361 (332361) = #332361/73:51.36
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_ULTRARAW96_MODE1, 2448, config 4, wanted index0 0 blocks, length 332361 blocks [G: BENQ DVD DD DW1620]
--------------------------------------------------------------

18:23:04 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [G: BENQ DVD DD DW1620] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_ULTRARAW96_MODE1, 2448/0x04, FilePos 0 367200 813986928, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
332361 | lead-out | 1 | 0x41 | 0x00

18:23:04 #15 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

18:23:04 #16 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started

18:23:04 #17 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.

18:23:04 #18 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed

18:23:04 #19 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 40x (6.000 kB/sec)

18:23:04 #20 SPTI -1189 File SCSIPassThrough.cpp, Line 323
G: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 30 02
Buffer x04d21000: Len x4000

18:23:04 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

18:23:04 #22 Text 0 File MMC.cpp, Line 16934
StartDAO : CD-Text - Off

18:23:04 #23 Text 0 File MMC.cpp, Line 21611
Set BUFE: Seamless Link -> ON

18:23:29 #24 SPTI -1135 File SCSIPassThrough.cpp, Line 323
G: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 FF FF F5 CD 00 00 1A 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 0C
Buffer x05da0000: Len xf8a0
0x00 FF FF FF FF FF FF FF FF FF FF 00 98 A7 14 61
0x00 28 00 1E 80 08 60 06 A8 02 FE 81 80 60 60 28
0x28 1E 9E 88 68 66 AE AA FC 7F 01 E0 00 48 00 36

18:23:29 #25 CDR -1135 File Writer.cpp, Line 302
Write error
G: BENQ DVD DD DW1620

18:23:29 #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

18:23:30 #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

18:23:34 #28 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 40x (6.000 kB/sec)


Existing drivers:
File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14/08/2002 0:00:00 (Adapter driver for rec)
File 'Drivers\IdeBusDr.sys': Ver=2.2.0.2126, 04/10/2002, size=13782 bytes, created 14/08/2002 0:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
 
Ik zie idd. weinig bijzonders aan het logje (voor zover ik dat als leek kan zien)
Zou het heel misschien aan dat ene schijfje kunnen liggen, m.a.w. probeer eens een willekeurig ander bestand op een RW'tje te branden.
 
En als je de CD eerst op Hardeschijf zet,en vandaar af brand al geprobeert?

Er zit een fout op de Cd die je wilt kopieeren
 
ik vrees dat mijn brander zijn beste tijd heeft gehad, want probeerde juist een cd te kopieren vanuit die brander maar de bastanden konden niet worden gelezen volgens nero.
en branden vanuit de harde schijf helpt ook niet en heb al meerdere cd's geprobeerd.
 
en dit logje krijg ik als ik met alcohol 120 brand
miss zien julie hier wat aan

########################### System Information ###########################
Windows XP Professional 5.1 (Build 2600)
Processor info: Pentium II (0.25 um) (202MHz)
Memory Available to Windows: 261.616 KB

############################ Program Information ###########################
File Name: C:\Program Files\Alcohol Soft\Alcohol 120\Alcohol.exe
Company Name: Alcohol Soft Development Team
Description: Alcohol 120%
Original: alcohol.exe
Product: Alcohol 120%
Trademarks: Alcohol Soft Development Team
Copyright: Copyright(C) 2002-2006 Alcohol Soft Development Team
Version: 1.9.5 ( Build 3823 )
Date: 2006/02/25
Size: 4208512 Bytes
Hash: 75b77869ed40340e4f4a5d1d4853fc90
File Name: C:\Program Files\Alcohol Soft\Alcohol 120\alcoholx.dll
Company Name: Alcohol Soft Co., Ltd.
Description: Alcohol virtual device control library
Original: alcoholx.dll
Product: Alcohol
Copyright: Copyright (C) 2000-2006
Version: 4.3.0 ( Build 0 )
Date: 2006/01/25
Size: 403352 Bytes
Hash: 8c1efe717203eed1b9f91da81083ba1c
File Name: C:\Program Files\Alcohol Soft\Alcohol 120\devsupp.dll
Company Name: Alcohol Soft Development Team
Description: Alcohol Software Device Capability Library
Original: devsupp.dll
Product: Alcohol Software Device Capability Library
Copyright: Copyright(C) 2002-2006 Alcohol Soft Development Team
Version: 2.5.0 ( Build 1421 )
Date: 2006/02/21
Size: 46080 Bytes
Hash: c38831c1e1f37d6e198cdd9fe8a9a926

########################### User Information ###########################
Licensed to: UN-REGISTERED ( 6/03/2006 )
Registered User ID: UN-REGISTERED

########################### Options Setting ###########################
Devices control interface: Default Driver Control Interface
CPU Priority Level: High
Memory Buffer Size (MB): 102
Examine the accuracy of data read from physical device: Yes
Turn off "Auto-Select best write speed" function if possible: No
Overburn disc(s): No
Fill memory buffer before recording discs: Yes
Ignore Media Type: Yes
RMPS (Recordable Media Physical Signature) Emulation: No
BAD Sectors Emulation: No
Sub-Channel Data Fixed & Emulation: No
Laserlock Emulation: No
Current Language: Dutch

############################ Device(s) List ############################
(I:) Generic DVD-ROM (d347prt, Port 2, Bus 0, Target 3, Lun 0)
(G:) Generic DVD-ROM (d347prt, Port 2, Bus 0, Target 1, Lun 0)
(E:) BENQ DVD DD DW1620 (atapi, Port 1, Bus 0, Target 0, Lun 0)
(J:) UQ4004U XAH540X (vaxscsi, Port 3, Bus 0, Target 0, Lun 0)
(H:) Generic DVD-ROM (d347prt, Port 2, Bus 0, Target 2, Lun 0)
(F:) Generic DVD-ROM (d347prt, Port 2, Bus 0, Target 0, Lun 0)

##################### Installed Device Drivers List #####################
ACPI.sys afd.sys als4000.sys alsgame.sys audstub.sys
Beep.SYS BOOTVID.dll Cdfs.SYS cdrom.sys CLASSPNP.SYS
d347bus.sys d347prt.sys disk.sys dmio.sys dmload.sys
drmk.sys dump_atapi.sys dump_WMILIB.SYS dxg.sys dxgthk.sys
Fastfat.sys fdc.sys Fips.SYS flpydisk.sys Fs_Rec.SYS
ftdisk.sys hal.dll i8042prt.sys Imapi.SYS ipsec.sys
isapnp.sys kbdclass.sys KDCOM.DLL kmixer.sys ks.sys
KSecDD.sys mf.sys mnmdd.SYS mouclass.sys MountMgr.sys
mrxdav.sys mrxsmb.sys Msfs.SYS msgpc.sys Mup.sys
NDIS.sys ndistapi.sys ndisuio.sys ndiswan.sys NDProxy.SYS
netbios.sys netbt.sys Npfs.SYS ntdll.dll ntoskrnl.exe
Null.SYS parport.sys PartMgr.sys ParVdm.SYS pci.sys
PCIIDEX.SYS portcls.sys processr.sys psched.sys ptilink.sys
R8139n51.SYS rasacd.sys rasl2tp.sys raspppoe.sys raspptp.sys
raspti.sys rdbss.sys RDPCDD.sys rdpdr.sys redbook.sys
SCSIPORT.SYS secdrv.sys serenum.sys serial.sys SiSV.sys
SiSV256.dll sptd.sys SPTD2093.SYS sr.sys srv.sys
swenum.sys sysaudio.sys tcpip.sys TDI.SYS termdd.sys
TICalc.SYS update.sys vaxscsi.sys vga.sys viaagp.sys
viaide.sys VIDEOPRT.SYS VolSnap.sys wanarp.sys watchdog.sys
wdmaud.sys win32k.sys WMILIB.SYS

################## Detailed Information of Device(s) ##################

///////////////////////////////////////////////////////////////////////
(I:) Generic DVD-ROM(2:3) detail information.
///////////////////////////////////////////////////////////////////////
Vendor Identification: Generic
Product Identification: DVD-ROM
Production Revision Level: 1.0
Location: d347prt, Port 2, Bus 0, Target 3, Lun 0
-* Note: This information below is provided by the unit, it might be inaccurate. *-
-* This software does not use this information! *-
Removable media: Yes
Version: ANSI X3.131:1994 (SCSI-2)
Response Data Format: 02h
CD-R Read/Write: Yes/No
CD-RW Read/Write: Yes/No
Read CD-R Fixed Packet: Yes
Test Write: No
DVD-ROM Read: Yes
DVD-R Read/Write: Yes/No
DVD-RAM Read/Write: Yes/No
Audio Play: Yes
Composite Audio and Video Data Stream: No
Digital output (IEC958) on port 1 Supported: Yes
Digital output (IEC958) on port 2 Supported: No
Mode 1 Form 2: Yes
Mode 2 Form 2: Yes
Multi-Session: Yes
BUF: No
CD-DA Commands supported: Yes
CD-DA Stream is Accurate: Yes
R-W Supported: Yes
R-W De-interleaved and Corrected: Yes
C2 Pointers Support: Yes
ISRC Supported: Yes
UPC Supported: Yes
Read Bar Code: No
Lock media into the drive: Yes
Currently drive Lock state: Unlocked
Prevent Jumper: No
Eject Command: Yes
Separate volume levels: No
Separate channel mute: No
Changer Supports Disc Present: No
Software slot selection: No
Side change capable: No
P through W in Lead-In: No

///////////////////////////////////////////////////////////////////////
(G:) Generic DVD-ROM(2:1) detail information.
///////////////////////////////////////////////////////////////////////
Vendor Identification: Generic
Product Identification: DVD-ROM
Production Revision Level: 1.0
Location: d347prt, Port 2, Bus 0, Target 1, Lun 0
-* Note: This information below is provided by the unit, it might be inaccurate. *-
-* This software does not use this information! *-
Removable media: Yes
Version: ANSI X3.131:1994 (SCSI-2)
Response Data Format: 02h
CD-R Read/Write: Yes/No
CD-RW Read/Write: Yes/No
Read CD-R Fixed Packet: Yes
Test Write: No
DVD-ROM Read: Yes
DVD-R Read/Write: Yes/No
DVD-RAM Read/Write: Yes/No
Audio Play: Yes
Composite Audio and Video Data Stream: No
Digital output (IEC958) on port 1 Supported: Yes
Digital output (IEC958) on port 2 Supported: No
Mode 1 Form 2: Yes
Mode 2 Form 2: Yes
Multi-Session: Yes
BUF: No
CD-DA Commands supported: Yes
CD-DA Stream is Accurate: Yes
R-W Supported: Yes
R-W De-interleaved and Corrected: Yes
C2 Pointers Support: Yes
ISRC Supported: Yes
UPC Supported: Yes
Read Bar Code: No
Lock media into the drive: Yes
Currently drive Lock state: Unlocked
Prevent Jumper: No
Eject Command: Yes
Separate volume levels: No
Separate channel mute: No
Changer Supports Disc Present: No
Software slot selection: No
Side change capable: No
P through W in Lead-In: No

///////////////////////////////////////////////////////////////////////
(E:) BENQ DVD DD DW1620(1:0) detail information.
///////////////////////////////////////////////////////////////////////
Vendor Identification: BENQ
Product Identification: DVD DD DW1620
Production Revision Level: B7H9
Location: atapi, Port 1, Bus 0, Target 0, Lun 0
Support recording method: DAO, RAW SAO, RAW SAO+SUB, RAW DAO(96), TAO, DVD DAO
BURN-Free Technology: Seamless Link
Auto-Select best write speed: Not Supported
-* Note: This information below is provided by the unit, it might be inaccurate. *-
-* This software does not use this information! *-
Removable media: Yes
Version: ATAPI (INF-8090i/INF-8020i/INF-8028i)
Response Data Format: 02h
CD-R Read/Write: Yes/Yes
CD-RW Read/Write: Yes/Yes
Read CD-R Fixed Packet: Yes
Test Write: Yes
DVD-ROM Read: Yes
DVD-R Read/Write: Yes/Yes
DVD-RAM Read/Write: No/No
Audio Play: Yes
Composite Audio and Video Data Stream: No
Digital output (IEC958) on port 1 Supported: Yes
Digital output (IEC958) on port 2 Supported: No
Mode 1 Form 2: Yes
Mode 2 Form 2: Yes
Multi-Session: Yes
BUF: Yes
CD-DA Commands supported: Yes
CD-DA Stream is Accurate: Yes
R-W Supported: Yes
R-W De-interleaved and Corrected: No
C2 Pointers Support: No
ISRC Supported: Yes
UPC Supported: Yes
Read Bar Code: No
Lock media into the drive: Yes
Currently drive Lock state: Unlocked
Prevent Jumper: No
Eject Command: Yes
Separate volume levels: No
Separate channel mute: No
Changer Supports Disc Present: No
Software slot selection: No
Side change capable: No
P through W in Lead-In: Yes

///////////////////////////////////////////////////////////////////////
(H:) Generic DVD-ROM(2:2) detail information.
///////////////////////////////////////////////////////////////////////
Vendor Identification: Generic
Product Identification: DVD-ROM
Production Revision Level: 1.0
Location: d347prt, Port 2, Bus 0, Target 2, Lun 0
-* Note: This information below is provided by the unit, it might be inaccurate. *-
-* This software does not use this information! *-
Removable media: Yes
Version: ANSI X3.131:1994 (SCSI-2)
Response Data Format: 02h
CD-R Read/Write: Yes/No
CD-RW Read/Write: Yes/No
Read CD-R Fixed Packet: Yes
Test Write: No
DVD-ROM Read: Yes
DVD-R Read/Write: Yes/No
DVD-RAM Read/Write: Yes/No
Audio Play: Yes
Composite Audio and Video Data Stream: No
Digital output (IEC958) on port 1 Supported: Yes
Digital output (IEC958) on port 2 Supported: No
Mode 1 Form 2: Yes
Mode 2 Form 2: Yes
Multi-Session: Yes
BUF: No
CD-DA Commands supported: Yes
CD-DA Stream is Accurate: Yes
R-W Supported: Yes
R-W De-interleaved and Corrected: Yes
C2 Pointers Support: Yes
ISRC Supported: Yes
UPC Supported: Yes
Read Bar Code: No
Lock media into the drive: Yes
Currently drive Lock state: Unlocked
Prevent Jumper: No
Eject Command: Yes
Separate volume levels: No
Separate channel mute: No
Changer Supports Disc Present: No
Software slot selection: No
Side change capable: No
P through W in Lead-In: No

///////////////////////////////////////////////////////////////////////
(F:) Generic DVD-ROM(2:0) detail information.
///////////////////////////////////////////////////////////////////////
Vendor Identification: Generic
Product Identification: DVD-ROM
Production Revision Level: 1.0
Location: d347prt, Port 2, Bus 0, Target 0, Lun 0
-* Note: This information below is provided by the unit, it might be inaccurate. *-
-* This software does not use this information! *-
Removable media: Yes
Version: ANSI X3.131:1994 (SCSI-2)
Response Data Format: 02h
CD-R Read/Write: Yes/No
CD-RW Read/Write: Yes/No
Read CD-R Fixed Packet: Yes
Test Write: No
DVD-ROM Read: Yes
DVD-R Read/Write: Yes/No
DVD-RAM Read/Write: Yes/No
Audio Play: Yes
Composite Audio and Video Data Stream: No
Digital output (IEC958) on port 1 Supported: Yes
Digital output (IEC958) on port 2 Supported: No
Mode 1 Form 2: Yes
Mode 2 Form 2: Yes
Multi-Session: Yes
BUF: No
CD-DA Commands supported: Yes
CD-DA Stream is Accurate: Yes
R-W Supported: Yes
R-W De-interleaved and Corrected: Yes
C2 Pointers Support: Yes
ISRC Supported: Yes
UPC Supported: Yes
Read Bar Code: No
Lock media into the drive: Yes
Currently drive Lock state: Unlocked
Prevent Jumper: No
Eject Command: Yes
Separate volume levels: No
Separate channel mute: No
Changer Supports Disc Present: No
Software slot selection: No
Side change capable: No
P through W in Lead-In: No

#######################################################################

###################### Source Disc/Image Information ######################
Type: Media Descriptor image-bestand
Lokatie: D:\
Naam: Sims2EP1_1.mds
Sims2EP1_1.mdf
Grootte: 659.04 MB
Sessie: 1
Track: 1


Sessie 01:
Track 01: Mode 1, Lengte: 293815(573.9 MB), Adres: 000000
#############################################################################

####################### Dumping/Recording Progress Log #######################
********* Time stamp of this log file: 6/03/2006 17:04:08 *********
17:04:08 Processor info : Pentium II (0.25 um) (360MHz)
17:04:08 Hoeveelheid geheugen beschikbaar voor Windows: 261.616 KB
17:04:08 Geheugen Buffer gebruik: 102 MB
17:04:09 Image-bestand bezig met laden: D:\Sims2EP1_1.mds
17:04:09 Source Info : Sessie: 1, Track: 1, Lengte: 573.9 MB / 065:17:40
17:04:26 (E:) BENQ DVD DD DW1620(1:0): Brand methode/snelheid
17:04:26 Branden - DAO / SAO - 4X (600 KB/Sec)
17:04:26 (E:) BENQ DVD DD DW1620(1:0): BURN-Free geactiveerd
17:04:34 (E:) BENQ DVD DD DW1620(1:0) - [Write ERROR], LBA: 2176, Length: 16
S:KEY - 03/0C/00 - "Write Error"
17:04:34 (E:) BENQ DVD DD DW1620(1:0): Branden mislukt!
17:04:34 Fout bericht : [03/0C/00] - Write Error
17:04:34 (E:) BENQ DVD DD DW1620(1:0): Branden mislukt!
17:04:34 Image-bestand laden geannuleerd!
17:04:39 Er is iets mis met de brand-procedure!
Bekijk de log-bestand en vertel de Technical Support over de fouten die erin staan.
##############################################################################
 
Laatst bewerkt door een moderator:
nee heb al meerdere cd's geprobeerd en toen net nog geprobeerd een map van de harde schijf uit te branden maar dat ging ook niet.
heb de brander nu in mijn oude pc zitten en daar werkt hij ook niet dus ligt het al niet aan de software denk ik.
 
Hallo allemaal ;)

Zoiets heb ik ook wel eens gehad met nero. Achteraf bleek dat het type medium niet goed op weg kon met de beloofde snelheid! Het was van type Pla... Pla... Pla.., :) mocht met 48x beschreven worden (!) maar ik kon hem slechts met moeite met 8x volkrijgen!

Dus bij bepaalde (vooral minder bekende of goedkope) typen gas terug! (probeer bv. met 8x te schrijven i.p.v. 40x of 48x).

Om schijven te besparen kan men beter eerst een media-check uitvoeren met nero en ook naar de media-compatibiliteit kijken op de site van fabrikant van de brander.

Groeten.
 
Laatst bewerkt:
Als je de virtuele cdroms had uitgeschakeld, was de lijst niet zo lang.:evil:

Als ik het goed zie, staat je udma op de secudaire ide controller op beide kanalen uit, de meeste schrijvers werken alleen als deze op udma 2 staan en niet op io.
 
Lange Pier zei:
Als je de virtuele cdroms had uitgeschakeld, was de lijst niet zo lang.:evil:

Als ik het goed zie, staat je udma op de secudaire ide controller op beide kanalen uit, de meeste schrijvers werken alleen als deze op udma 2 staan en niet op io.
Klik om te vergroten...


ja heb een beetje te veel vituele cdroms:)

maar wat bedoel je met die udma en hoe kan ik die inschakelen want daar snap ik niet veel van.
 
:confused:

In apparaatbeheer de ata/atapi controller openen en bij de eigenschappen van de primaire en secundaire ide controller kijken of de eerste en/of tweede kanaal op udma staan, afhankelijk waar de brander op aangesloten zit.
 
Configuratiescherm, systeem, hardware, apparaatbeheer, ide ata/atapi controllers, primary IDE channel, en dan dubbelklik erop, bij de tweede tab, etc, etc.

Staat deze op pio of udma mode, dit ook voor de secundair IDE kanaal, en bij alletwee ook het tweede kanaal.
 
Status
Niet open voor verdere reacties.
                    Steun ons                    

Nieuwste berichten

Terug
Bovenaan Onderaan