Advies Intel
Hallo Updaisy
Dit kreeg ik van Intel
Thank you for contacting Intel(R) Technical Support.
Please follow the subsequent instructions to verify the driver version of your Intel(R) PRO/Wireless 2200BG Network Connection.
-Click on Start\Run and on the Open line type "C:\Windows\System32\Drivers" without the quotes.
-Right click on the file named W22N51.SYS and click on Properties.
-Click on the version tab and you should see the 'File Version'.
Please refer to the table below to make sure you are using PROSet with the correct driver version. In order to check the version of the Intel(R) PROSet software included in your system, it can be found under "Help and About". Using PROSet with a driver that does not match will cause problems to the adapter and PROSet.
The Intel(R) PRO/Wireless 2200BG Network Connection driver and software table is the one below:
PROSet Device Driver
8.0.0 8.0.12.9000
8.0.0 8.0.12.12000
8.0.0.167 8.0.12.20000
8.1.1.0 8.1.0.28
9.0.1.0 9.0.1.9
Please note: It is critical that you update the driver before you install the new version of PROSet. If you have an older version of PROSet installed and you have profiles, you should export your profiles first. Then uninstall the old version of PROSet. Update the drivers for the adapter, and then install the latest version of PROSet. Once the new version of PROSet is installed you can then import the profiles you had previously exported.
If you are using WEP and it is configured incorrectly then you can associate to an Access Point but not transfer data. Are you using encryption (WEP)? If so, how have you configured WEP and what type of encryption are you using? (64-bit or 128-bit)
The User's Guide for the Intel(R) PRO/Wireless 2200BG Network Connection can be found on the following link:
http://support.intel.com/support/wireless/wlan/pro2200bg/index.htm
Once on the Intel(R) PRO/Wireless 2200BG Network Connection website, please click on the User's Guide link located at the bottom of the page.
Please be aware that the latest drivers and software for the Intel(R) PRO/Wireless 2200BG Network Connection can be found in the URL below:
http://support.intel.com/support/wireless/wlan/sb/CS-010623.htm
We also recommend updating to the latest version of the BIOS for your laptop and the latest firmware for your Wireless Router/Access Point.
Nu heb ik zowel een bestand als hierboven wat de 8 versie staat en een BG 2015 waar de 9 versie in staat.
OK dus kan ik de 2200 BG driver 9 downloaden installeren.
Maar deadviezen met profiles e.d. snap ik niet.
Kan jij met dit nader uitleggen alvorens ik hier aan begin ?