Ik kan volgende kopen ,wel tweedehands, maar dicht in m'n geburen :
Capaciteit: 60 GB -3,5 inch -DMA/ATA Maxtor RPM:7200
Verkoper geeft ook het volgende aan maar daar wordt ik niets wijzer van !
Iemand die hier wat info en commentaar uit kan halen ?
Met dank
----------------------------------------------------------------------
smartctl -a /dev/hdc
smartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is
http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: MAXTOR 6L060J3
Serial Number: 663221016851
Firmware Version: A93.0500
User Capacity: 60,040,544,256 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 5
ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1
Local Time is: Sun Dec 18 12:44:00 2005 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 35) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 30) minutes.
SMART Attributes Data Structure revision number: 11
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0029 100 253 020 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 075 065 020 Pre-fail Always - 3248
4 Start_Stop_Count 0x0032 100 100 008 Old_age Always - 42
5 Reallocated_Sector_Ct 0x0033 100 100 020 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 070 023 Pre-fail Always - 0
9 Power_On_Hours 0x0012 059 059 001 Old_age Always - 27075
10 Spin_Retry_Count 0x0026 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 008 Old_age Always - 41
13 Read_Soft_Error_Rate 0x000b 100 100 023 Pre-fail Always - 0
194 Temperature_Celsius 0x0022 089 080 042 Old_age Always - 30
195 Hardware_ECC_Recovered 0x001a 100 005 000 Old_age Always - 21105419
196 Reallocated_Event_Count 0x0010 100 100 020 Old_age Offline - 0
197 Current_Pending_Sector 0x0032 100 100 020 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x001a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 27074 -
# 2 Short offline Completed without error 00% 15752 -
Device does not support Selective Self Tests/Logging
hdparm -i /dev/hdc
/dev/hdc:
Model=MAXTOR 6L060J3, FwRev=A93.0500, SerialNo=663221016851
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=32256, SectSize=21298, ECCbytes=4
BuffType=DualPortCache, BuffSize=1819kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=117266688
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1:
* signifies the current active mode
