Hallo!
Ik werk met Windows XP en Nero 6.3.1.15 (nieuwste versie dus, net geupdate, logfile is nog 6.3.0.2, maar zelfde probleem). Bij het branden van data-cd's krijg ik sinds kort steeds een "Kon Endtrack niet uitvoeren". Wie weet hoe dit komt? Software probleem? Brander ter ziele? Ik zal de logfile bijvoegen:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 28-5-2003 18:53:46
ahead WinASPI: File 'D:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16-12-2003 19:18:06
Nero-versie: 6.3.0.2
Recorder: <HL-DT-ST DVDRAM GSA-4082B>Versie: A201 - HA 1 TA 1 - 6.3.0.2
Adapter-stuurprogramma:<atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <Generic DVD-ROM >Versie: 1.0 - HA 2 TA 0 - 6.3.0.2
Adapter-stuurprogramma:<d346prt> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JB-00EVA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ASUS DVD-E616P atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082B atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
ASUS DVD-E616P E: CDRom0
HL-DT-ST DVDRAM GSA-4082 F: CDRom1
Generic DVD-ROM G: CDRom4
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 479MB (491040kB)
Free physical memory: 107MB (109716kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
27.6.2004
CD-ROM (ISO)
20:37:10 #1 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
20:37:10 #2 Phase 90 File dlgbrnst.cpp, Line 1800
Bescherming tegen buffer-underrun geactiveerd
20:37:10 #3 Text 0 File Reader.cpp, Line 118
Reader running
20:37:10 #4 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRAM GSA-4082B running
20:37:10 #5 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)
20:37:11 #6 Text 0 File Burncd.cpp, Line 3101
Turn on Track-at-once, using CD-R/RW media
20:37:11 #7 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 80235 ( 17:51.60)
20:37:11 #8 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE
20:37:11 #9 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: HL-DT-ST DVDRAM GSA-4082B;
CDR code: 00 97 27 58; OSJ entry from: Mitsui Chemicals, Inc.
ATIP Data:
Special Info [hex] 1: C0 00 B0, 2: 61 1B 3A (LI 97:27.58), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
20:37:11 #10 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================
20:37:11 #11 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 80236 (80236) = #80236/17:49.61
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 80234 blocks [HL-DT-ST DVDRAM GSA-4082B]
--------------------------------------------------------------
20:37:11 #12 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [HL-DT-ST DVDRAM GSA-4082B] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 164630528, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
80236 | lead-out | 1 | 0x00 | 0x41
20:37:11 #13 Text 0 File ThreadedTransferInterface.cpp, Line 994
Removed 2 run-out blocks from end of track 1. Length: 80236 -> 80234.
20:37:11 #14 Phase 24 File dlgbrnst.cpp, Line 1800
Begin met cache-opslag van bestanden
20:37:12 #15 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.
20:37:12 #16 Phase 25 File dlgbrnst.cpp, Line 1800
Cache-opslag van bestanden voltooid
20:37:12 #17 Phase 32 File dlgbrnst.cpp, Line 1800
Begin simulatie met 24x (3.600 kB/sec)
20:37:12 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
20:37:12 #19 Text 0 File Mmc.cpp, Line 19451
Set BUFE: supported -> ON
20:38:44 #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
20:38:48 #21 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
20:38:48 #22 Phase 33 File dlgbrnst.cpp, Line 1800
Simulatie voltooid met 24x (3.600 kB/sec)
20:38:49 #23 Phase 36 File dlgbrnst.cpp, Line 1800
Begin brandproces met 24x (3.600 kB/sec)
20:38:49 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
20:38:49 #25 Text 0 File Mmc.cpp, Line 19451
Set BUFE: supported -> ON
20:38:55 #26 SCSI -1039 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03420000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x00 0x01 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x34 0x10 0x04 0x80 0x09 0x01
20:38:55 #27 CDR -1039 File Writer.cpp, Line 301
Focus- of trackingfout
20:38:55 #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
20:38:56 #29 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
20:38:56 #30 SCSI -1039 File Cdrdrv.cpp, Line 1171
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x34 0x10 0x04 0x80 0x09 0x01
20:38:56 #31 CDR -1039 File WriterStatus.cpp, Line 193
Focus- of trackingfout
20:38:56 #32 TRANSFER -18 File WriterStatus.cpp, Line 193
Kon EndTrack niet uitvoeren
20:38:56 #33 CDR -201 File WriterStatus.cpp, Line 196
Ongeldige schrijfstatus
HL-DT-ST DVDRAM GSA-4082B\H1 T1
20:38:56 #34 TRANSFER -18 File WriterStatus.cpp, Line 196
Kon EndTrack niet uitvoeren
20:38:56 #35 Text 0 File Mmc.cpp, Line 14287
<HL-DT-STDVDRAM GSA-4082B> start Close Session
20:38:56 #36 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
20:38:56 #37 Phase 38 File dlgbrnst.cpp, Line 1800
Brandproces mislukt met 24x (3.600 kB/sec)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 28-5-2003 18:53:46
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 8-4-2003 14:00:00 (Adapter driver for rec)
File 'Drivers\d346prt.sys': Ver=3.46.0.0 built by: WinDDK, size=5248 bytes, created 12-3-2004 22:41:42 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Ik hoop dat iemand mij kan helpen
Ik werk met Windows XP en Nero 6.3.1.15 (nieuwste versie dus, net geupdate, logfile is nog 6.3.0.2, maar zelfde probleem). Bij het branden van data-cd's krijg ik sinds kort steeds een "Kon Endtrack niet uitvoeren". Wie weet hoe dit komt? Software probleem? Brander ter ziele? Ik zal de logfile bijvoegen:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 28-5-2003 18:53:46
ahead WinASPI: File 'D:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16-12-2003 19:18:06
Nero-versie: 6.3.0.2
Recorder: <HL-DT-ST DVDRAM GSA-4082B>Versie: A201 - HA 1 TA 1 - 6.3.0.2
Adapter-stuurprogramma:<atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <Generic DVD-ROM >Versie: 1.0 - HA 2 TA 0 - 6.3.0.2
Adapter-stuurprogramma:<d346prt> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JB-00EVA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ASUS DVD-E616P atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082B atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
ASUS DVD-E616P E: CDRom0
HL-DT-ST DVDRAM GSA-4082 F: CDRom1
Generic DVD-ROM G: CDRom4
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 479MB (491040kB)
Free physical memory: 107MB (109716kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
27.6.2004
CD-ROM (ISO)
20:37:10 #1 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
20:37:10 #2 Phase 90 File dlgbrnst.cpp, Line 1800
Bescherming tegen buffer-underrun geactiveerd
20:37:10 #3 Text 0 File Reader.cpp, Line 118
Reader running
20:37:10 #4 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRAM GSA-4082B running
20:37:10 #5 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)
20:37:11 #6 Text 0 File Burncd.cpp, Line 3101
Turn on Track-at-once, using CD-R/RW media
20:37:11 #7 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 80235 ( 17:51.60)
20:37:11 #8 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE
20:37:11 #9 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: HL-DT-ST DVDRAM GSA-4082B;
CDR code: 00 97 27 58; OSJ entry from: Mitsui Chemicals, Inc.
ATIP Data:
Special Info [hex] 1: C0 00 B0, 2: 61 1B 3A (LI 97:27.58), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
20:37:11 #10 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================
20:37:11 #11 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 80236 (80236) = #80236/17:49.61
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 80234 blocks [HL-DT-ST DVDRAM GSA-4082B]
--------------------------------------------------------------
20:37:11 #12 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [HL-DT-ST DVDRAM GSA-4082B] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 164630528, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
80236 | lead-out | 1 | 0x00 | 0x41
20:37:11 #13 Text 0 File ThreadedTransferInterface.cpp, Line 994
Removed 2 run-out blocks from end of track 1. Length: 80236 -> 80234.
20:37:11 #14 Phase 24 File dlgbrnst.cpp, Line 1800
Begin met cache-opslag van bestanden
20:37:12 #15 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.
20:37:12 #16 Phase 25 File dlgbrnst.cpp, Line 1800
Cache-opslag van bestanden voltooid
20:37:12 #17 Phase 32 File dlgbrnst.cpp, Line 1800
Begin simulatie met 24x (3.600 kB/sec)
20:37:12 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
20:37:12 #19 Text 0 File Mmc.cpp, Line 19451
Set BUFE: supported -> ON
20:38:44 #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
20:38:48 #21 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
20:38:48 #22 Phase 33 File dlgbrnst.cpp, Line 1800
Simulatie voltooid met 24x (3.600 kB/sec)
20:38:49 #23 Phase 36 File dlgbrnst.cpp, Line 1800
Begin brandproces met 24x (3.600 kB/sec)
20:38:49 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
20:38:49 #25 Text 0 File Mmc.cpp, Line 19451
Set BUFE: supported -> ON
20:38:55 #26 SCSI -1039 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03420000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x00 0x01 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x34 0x10 0x04 0x80 0x09 0x01
20:38:55 #27 CDR -1039 File Writer.cpp, Line 301
Focus- of trackingfout
20:38:55 #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
20:38:56 #29 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
20:38:56 #30 SCSI -1039 File Cdrdrv.cpp, Line 1171
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x34 0x10 0x04 0x80 0x09 0x01
20:38:56 #31 CDR -1039 File WriterStatus.cpp, Line 193
Focus- of trackingfout
20:38:56 #32 TRANSFER -18 File WriterStatus.cpp, Line 193
Kon EndTrack niet uitvoeren
20:38:56 #33 CDR -201 File WriterStatus.cpp, Line 196
Ongeldige schrijfstatus
HL-DT-ST DVDRAM GSA-4082B\H1 T1
20:38:56 #34 TRANSFER -18 File WriterStatus.cpp, Line 196
Kon EndTrack niet uitvoeren
20:38:56 #35 Text 0 File Mmc.cpp, Line 14287
<HL-DT-STDVDRAM GSA-4082B> start Close Session
20:38:56 #36 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
20:38:56 #37 Phase 38 File dlgbrnst.cpp, Line 1800
Brandproces mislukt met 24x (3.600 kB/sec)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 28-5-2003 18:53:46
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 8-4-2003 14:00:00 (Adapter driver for rec)
File 'Drivers\d346prt.sys': Ver=3.46.0.0 built by: WinDDK, size=5248 bytes, created 12-3-2004 22:41:42 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Ik hoop dat iemand mij kan helpen
