anthony68
Gebruiker
- Lid geworden
- 3 aug 2006
- Berichten
- 229
<notice>'/etc/init.d/rc5.d/S11xdm start' exits with status 0
Starting personal-firewall (final)<notice>/etc/init.d/rc5.d/S21personal-firewall.final start
[not active]
unused
Hier uit mijn log staat dat de firewall niet active is. Hoe zet ik hem active en hoe zet ik mijn netwerkadres op 10.0.0.151 ipv 10.0.0.150 want deze wordt al gebruikt door mijn windowsbak. geeft problemen...
heb yast gedraaid en die zegt firewall goed maar hoe kan ik dat testen en veriferen?? Ik kan shields up niet testen want dan kom ik steeds op de zelfde pagina uit ipv dat ie firewall test.
linux machine 500mhz PII 64mb ram
Dit is mijn startup log;
Inspecting /boot/System.map-2.4.18-4GB
Loaded 12771 symbols from /boot/System.map-2.4.18-4GB.
Symbols match kernel version 2.4.18.
Loaded 5 symbols from 1 module.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.4.18-4GB (root@Pentium.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 Wed Mar 27 13:57:05 UTC 2002
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 0000000003ffd940 (usable)
<4> BIOS-e820: 0000000003ffd940 - 0000000004000000 (ACPI data)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
<4>Scanning bios EBDA for MXT signature
<4>On node 0 totalpages: 16381
<4>zone(0): 4096 pages.
<4>zone(1): 12285 pages.
<4>zone(2): 0 pages.
<4>Building zonelist for node : 0
<4>Kernel command line: auto BOOT_IMAGE=linux ro root=302
<6>Initializing CPU#0
<4>Detected 398.273 MHz processor.
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 794.62 BogoMIPS
<4>Memory: 61240k/65524k available (1389k kernel code, 3896k reserved, 406k data, 120k init, 0k highmem)
<4>Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
<4>Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
<4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<4>Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
<4>Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
<7>CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0
<6>CPU: L1 I cache: 16K, L1 D cache: 16K
<6>CPU: L2 cache: 512K
<7>CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000
<7>CPU: Common caps: 0183f9ff 00000000 00000000 00000000
<4>CPU: Intel Pentium II (Deschutes) stepping 02
<6>Enabling fast FPU save and restore... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<4>PCI: PCI BIOS revision 2.10 entry at 0xfd85c, last bus=1
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<3>Unknown bridge resource 0: assuming transparent
<3>Unknown bridge resource 2: assuming transparent
<6>PCI: Using IRQ router PIIX [8086/7110] at 00:02.0
<6>Limiting direct PCI/PCI transfers.
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<6>IBM machine detected. Enabling interrupts during APM calls.
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
<4>mxt_scan_bios: enter
<4>Starting kswapd
<4>kinoded started
<5>VFS: Diskquotas version dquot_6.5.0 initialized
<5>ACPI: APM is already active, exiting
<6>vesafb: framebuffer at 0xf4000000, mapped to 0xc480d000, size 4096k
<6>vesafb: mode is 800x600x16, linelength=1600, pages=3
<6>vesafb: protected mode interface info at c000:5d5d
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>Looking for splash picture.... found (800x600, 30406 bytes).
<4>Console: switching to colour frame buffer device 82x26
<6>fb0: VESA VGA frame buffer device
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI SERIAL_ACPI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<6>Real Time Clock Driver v1.10e
<4>block: 128 slots per queue, batch=32
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>Uniform Multi-Platform E-IDE driver Revision: 6.31
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<4>PIIX4: IDE controller on PCI bus 00 dev 11
<4>PIIX4: chipset revision 1
<4>PIIX4: not 100%% native mode: will probe irqs later
<4> ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hda
MA, hdb
io
<4> ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdcio, hddio
<4>hda: FUJITSU MPE3064AT, ATA DISK drive
<4>hdc: CD-532E-B, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>blk: queue c031ece4, I/O limit 4095Mb (mask 0xffffffff)
<4>hda: safely enabled flush
<6>hda: 12672450 sectors (6488 MB) w/512KiB Cache, CHS=788/255/63, UDMA(33)
<4>hdc: no flushcache support
<4>hdc: ATAPI 32X CD-ROM drive, 128kB Cache
<6>Uniform CD-ROM driver Revision: 3.12
<4>ide-floppy driver 0.99
<6>Partition check:
<6> hda: hda1 hda2
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<6>loop: loaded (max 16 devices)
<6>Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
<6>Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
<4>ide-floppy driver 0.99
<6>SCSI subsystem driver Revision: 1.00
<3>request_module[scsi_hostadapter]: Root fs not mounted
<3>request_module[scsi_hostadapter]: Root fs not mounted
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<4>IP: routing cache hash table of 512 buckets, 4Kbytes
<4>TCP: Hash tables configured (established 4096 bind 4096)
<6>Linux IP multicast router 0.06 plus PIM-SM
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<5>RAMDISK: Compressed image found at block 0
<4>Uncompressing............done.
<4>Freeing initrd memory: 565k freed
<4>VFS: Mounted root (ext2 filesystem).
<4>reiserfs: checking transaction log (device 03:02) ...
<4>Warning, log replay starting on readonly filesystem
<4>reiserfs: replayed 7 transactions in 3 seconds
<4>Using r5 hash to sort names
<4>ReiserFS version 3.6.25
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<4>change_root: old root has d_count=2
<5>Trying to unmount old root ... okay
<4>Freeing unused kernel memory: 120k freed
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>Adding Swap: 200772k swap-space (priority 42)
<4>Removing [70403 100821 0x0 SD]..<4>done
<4>There were 1 uncompleted unlinks/truncates. Completed
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Wed Mar 14 07:05:47 2007
Activating swap-devices in /etc/fstab...
doneChecking file systems...
fsck 1.26 (3-Feb-2002)
Reiserfs super block in block 16 on 0x302 of format 3.6 with standard journal
Blocks (total/free): 1532199/1192199 by 4096 bytes
Filesystem is NOT cleanly umounted
doneMounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw)
nothing was mounted
doneRestore device permissions
done
Activating remaining swap-devices in /etc/fstab...
doneMounting shared memory FS on /dev/shm
done
Setting up the CMOS clock
done
Setting up linker cache (/etc/ld.so.cache) using ldconfig
done
Setting up timezone data
done
Setting up hostname 'linux'
done
Setting up loopback interface
done
Cleaning up using /sbin/modify_resolvconf:
restored /etc/resolv.conf from /etc/resolv.conf.saved.by.dhcpcd
done
Configuring serial ports...
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
doneCreating /var/log/boot.msg
doneEnabling syn flood protection
done
Disabling IP forwarding
done
<notice>killproc: kill(27,29)
Running /etc/init.d/boot.local
done<notice>killproc: kill(27,3)
INIT: Entering runlevel: 5
Boot logging started on /dev/tty1(/dev/console) at Wed Mar 14 07:05:58 2007
Master Resource Control: previous runlevel: N, switching to runlevel:
5
<notice>/etc/init.d/rc5.d/S01isdn start
<notice>'/etc/init.d/rc5.d/S01isdn start' exits with status 0
<notice>/etc/init.d/rc5.d/S01personal-firewall.initial start
Starting personal-firewall (initial) [not active]
unused
<notice>'/etc/init.d/rc5.d/S01personal-firewall.initial start' exits with status 6
<notice>/etc/init.d/rc5.d/S01random start
Initializing random number generator
done
<notice>'/etc/init.d/rc5.d/S01random start' exits with status 0
<notice>/etc/init.d/rc5.d/S05network start
Setting up network interfaces:
lo
done
eth0 (DHCP) <notice>startproc: execve (/sbin/dhcpcd) [ /sbin/dhcpcd -D -N -Y -t 999999 -h linux eth0 ], [ PWD=/etc/sysconfig/network HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux OLDPWD=/etc/sysconfig/network LINES=26 SHLVL=4 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/sbin/dhcpcd ]
<notice>pidofproc: dhcpcd 440
. IP address: 10.0.0.150
done
Starting syslog services<notice>'/etc/init.d/rc5.d/S05network start' exits with status 0
<notice>/etc/init.d/rc5.d/S06syslog start
<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=26 SHLVL=2 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=26 SHLVL=2 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
Starting hotplugging services [<notice>'/etc/init.d/rc5.d/S06syslog start' exits with status 0
<notice>/etc/init.d/rc5.d/S07hotplug start
net pci usb ]
done
<notice>'/etc/init.d/rc5.d/S07hotplug start' exits with status 0
<notice>/etc/init.d/rc5.d/S08hwscan start
Starting hardware scan on boot<notice>'/etc/init.d/rc5.d/S08hwscan start' exits with status 0
<notice>/etc/init.d/rc5.d/S08portmap start
Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=26 SHLVL=2 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/sbin/portmap ]
done
<notice>'/etc/init.d/rc5.d/S08portmap start' exits with status 0
<notice>/etc/init.d/rc5.d/S08splash_early start
<notice>'/etc/init.d/rc5.d/S08splash_early start' exits with status 0
<notice>/etc/init.d/rc5.d/S08sshd start
Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=26 SHLVL=2 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
done
<notice>'/etc/init.d/rc5.d/S08sshd start' exits with status 0
<notice>/etc/init.d/rc5.d/S09nfs start
<notice>'/etc/init.d/rc5.d/S09nfs start' exits with status 0
<notice>/etc/init.d/rc5.d/S10alsasound start
Starting sound driver: cs4236
done
Restoring the previous sound setting
done
<notice>'/etc/init.d/rc5.d/S10alsasound start' exits with status 0
<notice>/etc/init.d/rc5.d/S10atd start
Starting service at daemon<notice>startproc: execve (/usr/sbin/atd) [ /usr/sbin/atd ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=26 SHLVL=2 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/atd ]
done
<notice>'/etc/init.d/rc5.d/S10atd start' exits with status 0
<notice>/etc/init.d/rc5.d/S10fbset start
<notice>'/etc/init.d/rc5.d/S10fbset start' exits with status 0
<notice>/etc/init.d/rc5.d/S10sendmail start
Initializing SMTP port (sendmail)<notice>startproc: execve (/usr/sbin/sendmail) [ /usr/sbin/sendmail -O DaemonPortOptions=Addr=127.0.0.1 -L sendmail -Am -bd -q30m -om ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=26 SHLVL=2 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/sendmail ]
<notice>startproc: execve (/usr/sbin/sendmail) [ /usr/sbin/sendmail -L sendmail-client -Ac -q30m ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=26 SHLVL=2 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/sendmail ]
done
<notice>'/etc/init.d/rc5.d/S10sendmail start' exits with status 0
<notice>/etc/init.d/rc5.d/S10smbfs start
<notice>'/etc/init.d/rc5.d/S10smbfs start' exits with status 0
<notice>/etc/init.d/rc5.d/S11cron start
Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=26 SHLVL=2 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
done
<notice>'/etc/init.d/rc5.d/S11cron start' exits with status 0
<notice>/etc/init.d/rc5.d/S11kbd start
Loading keymap qwerty/us.map.gz
doneLoading compose table winkeys shiftctrl latin1.add
done
Loading console font lat9w-16.psfu
doneLoading screenmap trivial
doneSetting up console ttys
done<notice>'/etc/init.d/rc5.d/S11kbd start' exits with status 0
<notice>/etc/init.d/rc5.d/S11nscd start
Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=26 SHLVL=2 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
<notice>'/etc/init.d/rc5.d/S11nscd start' exits with status 0
<notice>/etc/init.d/rc5.d/S11splash start
<notice>'/etc/init.d/rc5.d/S11splash start' exits with status 0
<notice>/etc/init.d/rc5.d/S11xdm start
Starting service xdm<notice>startproc: execve (/usr/X11R6/bin/xdm) [ /usr/X11R6/bin/xdm ], [ PWD=/ LC_MESSAGES= HOSTNAME=linux CONSOLE=/dev/console RC_LANG=nl_NL@euro PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 QTDIR=/usr/lib/qt3 KDEROOTHOME=/root/.kdm LC_TIME= MACHTYPE=i386-suse-linux RC_LC_COLLATE=POSIX LC_ALL= LINES=26 LANG=nl_NL@euro LC_NUMERIC= SHLVL=2 COLUMNS=82 LC_CTYPE=nl_NL@euro BOOT_IMAGE=linux SHELL=/bin/bash PRINTER=lp HOSTTYPE=i386 OSTYPE=linux WINDOWMANAGER=/usr/X11R6/bin/kde HOME=/ TERM=linux no_proxy=localhost PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 LC_MONETARY= INIT_VERSION=sysvinit-2.82 LC_COLLATE=POSIX _=/sbin/startproc DAEMON=/usr/X11R6/bin/xdm ]
done
<notice>'/etc/init.d/rc5.d/S11xdm start' exits with status 0
Starting personal-firewall (final)<notice>/etc/init.d/rc5.d/S21personal-firewall.final start
[not active]
unused
<notice>'/etc/init.d/rc5.d/S21personal-firewall.final start' exits with status 6
<notice>/etc/init.d/rc5.d/S21splash_late start
Master Resource Control: runlevel 5 has been
reached
Skipped services in runlevel 5: personal-firewall.initial personal-firewall.final
<notice>'/etc/init.d/rc5.d/S21splash_late start' exits with status 0
<notice>killproc: kill(330,3)
Starting personal-firewall (final)<notice>/etc/init.d/rc5.d/S21personal-firewall.final start
[not active]
unused
Hier uit mijn log staat dat de firewall niet active is. Hoe zet ik hem active en hoe zet ik mijn netwerkadres op 10.0.0.151 ipv 10.0.0.150 want deze wordt al gebruikt door mijn windowsbak. geeft problemen...
heb yast gedraaid en die zegt firewall goed maar hoe kan ik dat testen en veriferen?? Ik kan shields up niet testen want dan kom ik steeds op de zelfde pagina uit ipv dat ie firewall test.
linux machine 500mhz PII 64mb ram
Dit is mijn startup log;
Inspecting /boot/System.map-2.4.18-4GB
Loaded 12771 symbols from /boot/System.map-2.4.18-4GB.
Symbols match kernel version 2.4.18.
Loaded 5 symbols from 1 module.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.4.18-4GB (root@Pentium.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 Wed Mar 27 13:57:05 UTC 2002
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 0000000003ffd940 (usable)
<4> BIOS-e820: 0000000003ffd940 - 0000000004000000 (ACPI data)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
<4>Scanning bios EBDA for MXT signature
<4>On node 0 totalpages: 16381
<4>zone(0): 4096 pages.
<4>zone(1): 12285 pages.
<4>zone(2): 0 pages.
<4>Building zonelist for node : 0
<4>Kernel command line: auto BOOT_IMAGE=linux ro root=302
<6>Initializing CPU#0
<4>Detected 398.273 MHz processor.
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 794.62 BogoMIPS
<4>Memory: 61240k/65524k available (1389k kernel code, 3896k reserved, 406k data, 120k init, 0k highmem)
<4>Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
<4>Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
<4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<4>Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
<4>Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
<7>CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0
<6>CPU: L1 I cache: 16K, L1 D cache: 16K
<6>CPU: L2 cache: 512K
<7>CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000
<7>CPU: Common caps: 0183f9ff 00000000 00000000 00000000
<4>CPU: Intel Pentium II (Deschutes) stepping 02
<6>Enabling fast FPU save and restore... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<4>PCI: PCI BIOS revision 2.10 entry at 0xfd85c, last bus=1
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<3>Unknown bridge resource 0: assuming transparent
<3>Unknown bridge resource 2: assuming transparent
<6>PCI: Using IRQ router PIIX [8086/7110] at 00:02.0
<6>Limiting direct PCI/PCI transfers.
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<6>IBM machine detected. Enabling interrupts during APM calls.
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
<4>mxt_scan_bios: enter
<4>Starting kswapd
<4>kinoded started
<5>VFS: Diskquotas version dquot_6.5.0 initialized
<5>ACPI: APM is already active, exiting
<6>vesafb: framebuffer at 0xf4000000, mapped to 0xc480d000, size 4096k
<6>vesafb: mode is 800x600x16, linelength=1600, pages=3
<6>vesafb: protected mode interface info at c000:5d5d
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>Looking for splash picture.... found (800x600, 30406 bytes).
<4>Console: switching to colour frame buffer device 82x26
<6>fb0: VESA VGA frame buffer device
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI SERIAL_ACPI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<6>Real Time Clock Driver v1.10e
<4>block: 128 slots per queue, batch=32
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>Uniform Multi-Platform E-IDE driver Revision: 6.31
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<4>PIIX4: IDE controller on PCI bus 00 dev 11
<4>PIIX4: chipset revision 1
<4>PIIX4: not 100%% native mode: will probe irqs later
<4> ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hda
MA, hdbio<4> ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdc
io, hddio<4>hda: FUJITSU MPE3064AT, ATA DISK drive
<4>hdc: CD-532E-B, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>blk: queue c031ece4, I/O limit 4095Mb (mask 0xffffffff)
<4>hda: safely enabled flush
<6>hda: 12672450 sectors (6488 MB) w/512KiB Cache, CHS=788/255/63, UDMA(33)
<4>hdc: no flushcache support
<4>hdc: ATAPI 32X CD-ROM drive, 128kB Cache
<6>Uniform CD-ROM driver Revision: 3.12
<4>ide-floppy driver 0.99
<6>Partition check:
<6> hda: hda1 hda2
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<6>loop: loaded (max 16 devices)
<6>Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
<6>Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
<4>ide-floppy driver 0.99
<6>SCSI subsystem driver Revision: 1.00
<3>request_module[scsi_hostadapter]: Root fs not mounted
<3>request_module[scsi_hostadapter]: Root fs not mounted
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<4>IP: routing cache hash table of 512 buckets, 4Kbytes
<4>TCP: Hash tables configured (established 4096 bind 4096)
<6>Linux IP multicast router 0.06 plus PIM-SM
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<5>RAMDISK: Compressed image found at block 0
<4>Uncompressing............done.
<4>Freeing initrd memory: 565k freed
<4>VFS: Mounted root (ext2 filesystem).
<4>reiserfs: checking transaction log (device 03:02) ...
<4>Warning, log replay starting on readonly filesystem
<4>reiserfs: replayed 7 transactions in 3 seconds
<4>Using r5 hash to sort names
<4>ReiserFS version 3.6.25
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<4>change_root: old root has d_count=2
<5>Trying to unmount old root ... okay
<4>Freeing unused kernel memory: 120k freed
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>Adding Swap: 200772k swap-space (priority 42)
<4>Removing [70403 100821 0x0 SD]..<4>done
<4>There were 1 uncompleted unlinks/truncates. Completed
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Wed Mar 14 07:05:47 2007
Activating swap-devices in /etc/fstab...
doneChecking file systems...
fsck 1.26 (3-Feb-2002)
Reiserfs super block in block 16 on 0x302 of format 3.6 with standard journal
Blocks (total/free): 1532199/1192199 by 4096 bytes
Filesystem is NOT cleanly umounted
doneMounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw)
nothing was mounted
doneRestore device permissions
done
Activating remaining swap-devices in /etc/fstab...
doneMounting shared memory FS on /dev/shm
done
Setting up the CMOS clock
done
Setting up linker cache (/etc/ld.so.cache) using ldconfig
done
Setting up timezone data
done
Setting up hostname 'linux'
done
Setting up loopback interface
done
Cleaning up using /sbin/modify_resolvconf:
restored /etc/resolv.conf from /etc/resolv.conf.saved.by.dhcpcd
done
Configuring serial ports...
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
doneCreating /var/log/boot.msg
doneEnabling syn flood protection
done
Disabling IP forwarding
done
<notice>killproc: kill(27,29)
Running /etc/init.d/boot.local
done<notice>killproc: kill(27,3)
INIT: Entering runlevel: 5
Boot logging started on /dev/tty1(/dev/console) at Wed Mar 14 07:05:58 2007
Master Resource Control: previous runlevel: N, switching to runlevel:
5
<notice>/etc/init.d/rc5.d/S01isdn start
<notice>'/etc/init.d/rc5.d/S01isdn start' exits with status 0
<notice>/etc/init.d/rc5.d/S01personal-firewall.initial start
Starting personal-firewall (initial) [not active]
unused
<notice>'/etc/init.d/rc5.d/S01personal-firewall.initial start' exits with status 6
<notice>/etc/init.d/rc5.d/S01random start
Initializing random number generator
done
<notice>'/etc/init.d/rc5.d/S01random start' exits with status 0
<notice>/etc/init.d/rc5.d/S05network start
Setting up network interfaces:
lo
done
eth0 (DHCP) <notice>startproc: execve (/sbin/dhcpcd) [ /sbin/dhcpcd -D -N -Y -t 999999 -h linux eth0 ], [ PWD=/etc/sysconfig/network HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux OLDPWD=/etc/sysconfig/network LINES=26 SHLVL=4 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/sbin/dhcpcd ]
<notice>pidofproc: dhcpcd 440
. IP address: 10.0.0.150
done
Starting syslog services<notice>'/etc/init.d/rc5.d/S05network start' exits with status 0
<notice>/etc/init.d/rc5.d/S06syslog start
<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=26 SHLVL=2 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=26 SHLVL=2 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
Starting hotplugging services [<notice>'/etc/init.d/rc5.d/S06syslog start' exits with status 0
<notice>/etc/init.d/rc5.d/S07hotplug start
net pci usb ]
done
<notice>'/etc/init.d/rc5.d/S07hotplug start' exits with status 0
<notice>/etc/init.d/rc5.d/S08hwscan start
Starting hardware scan on boot<notice>'/etc/init.d/rc5.d/S08hwscan start' exits with status 0
<notice>/etc/init.d/rc5.d/S08portmap start
Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=26 SHLVL=2 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/sbin/portmap ]
done
<notice>'/etc/init.d/rc5.d/S08portmap start' exits with status 0
<notice>/etc/init.d/rc5.d/S08splash_early start
<notice>'/etc/init.d/rc5.d/S08splash_early start' exits with status 0
<notice>/etc/init.d/rc5.d/S08sshd start
Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=26 SHLVL=2 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
done
<notice>'/etc/init.d/rc5.d/S08sshd start' exits with status 0
<notice>/etc/init.d/rc5.d/S09nfs start
<notice>'/etc/init.d/rc5.d/S09nfs start' exits with status 0
<notice>/etc/init.d/rc5.d/S10alsasound start
Starting sound driver: cs4236
done
Restoring the previous sound setting
done
<notice>'/etc/init.d/rc5.d/S10alsasound start' exits with status 0
<notice>/etc/init.d/rc5.d/S10atd start
Starting service at daemon<notice>startproc: execve (/usr/sbin/atd) [ /usr/sbin/atd ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=26 SHLVL=2 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/atd ]
done
<notice>'/etc/init.d/rc5.d/S10atd start' exits with status 0
<notice>/etc/init.d/rc5.d/S10fbset start
<notice>'/etc/init.d/rc5.d/S10fbset start' exits with status 0
<notice>/etc/init.d/rc5.d/S10sendmail start
Initializing SMTP port (sendmail)<notice>startproc: execve (/usr/sbin/sendmail) [ /usr/sbin/sendmail -O DaemonPortOptions=Addr=127.0.0.1 -L sendmail -Am -bd -q30m -om ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=26 SHLVL=2 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/sendmail ]
<notice>startproc: execve (/usr/sbin/sendmail) [ /usr/sbin/sendmail -L sendmail-client -Ac -q30m ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=26 SHLVL=2 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/sendmail ]
done
<notice>'/etc/init.d/rc5.d/S10sendmail start' exits with status 0
<notice>/etc/init.d/rc5.d/S10smbfs start
<notice>'/etc/init.d/rc5.d/S10smbfs start' exits with status 0
<notice>/etc/init.d/rc5.d/S11cron start
Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=26 SHLVL=2 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
done
<notice>'/etc/init.d/rc5.d/S11cron start' exits with status 0
<notice>/etc/init.d/rc5.d/S11kbd start
Loading keymap qwerty/us.map.gz
doneLoading compose table winkeys shiftctrl latin1.add
done
Loading console font lat9w-16.psfu
doneLoading screenmap trivial
doneSetting up console ttys
done<notice>'/etc/init.d/rc5.d/S11kbd start' exits with status 0
<notice>/etc/init.d/rc5.d/S11nscd start
Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=26 SHLVL=2 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
<notice>'/etc/init.d/rc5.d/S11nscd start' exits with status 0
<notice>/etc/init.d/rc5.d/S11splash start
<notice>'/etc/init.d/rc5.d/S11splash start' exits with status 0
<notice>/etc/init.d/rc5.d/S11xdm start
Starting service xdm<notice>startproc: execve (/usr/X11R6/bin/xdm) [ /usr/X11R6/bin/xdm ], [ PWD=/ LC_MESSAGES= HOSTNAME=linux CONSOLE=/dev/console RC_LANG=nl_NL@euro PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 QTDIR=/usr/lib/qt3 KDEROOTHOME=/root/.kdm LC_TIME= MACHTYPE=i386-suse-linux RC_LC_COLLATE=POSIX LC_ALL= LINES=26 LANG=nl_NL@euro LC_NUMERIC= SHLVL=2 COLUMNS=82 LC_CTYPE=nl_NL@euro BOOT_IMAGE=linux SHELL=/bin/bash PRINTER=lp HOSTTYPE=i386 OSTYPE=linux WINDOWMANAGER=/usr/X11R6/bin/kde HOME=/ TERM=linux no_proxy=localhost PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 LC_MONETARY= INIT_VERSION=sysvinit-2.82 LC_COLLATE=POSIX _=/sbin/startproc DAEMON=/usr/X11R6/bin/xdm ]
done
<notice>'/etc/init.d/rc5.d/S11xdm start' exits with status 0
Starting personal-firewall (final)<notice>/etc/init.d/rc5.d/S21personal-firewall.final start
[not active]
unused
<notice>'/etc/init.d/rc5.d/S21personal-firewall.final start' exits with status 6
<notice>/etc/init.d/rc5.d/S21splash_late start
Master Resource Control: runlevel 5 has been
reached
Skipped services in runlevel 5: personal-firewall.initial personal-firewall.final
<notice>'/etc/init.d/rc5.d/S21splash_late start' exits with status 0
<notice>killproc: kill(330,3)
Laatst bewerkt:
