kan geen contact maken met WHS

Status
Niet open voor verdere reacties.

Jorn1975

Gebruiker
Lid geworden
14 feb 2008
Berichten
35


Hallo ik heb een windows home server geinstalleerd maar helaas krijg ik geen verbinding via de connector.

Ik heb de connector software gehaald van http://server:55000 dit ging wel maar zodra ik hem start kan hij geen verbinding maken.

In WHS geeft hij dit aan dus lijkt allemaal oke.


Checking if Remote Desktop Connection is enabled on your home server......
PASS: Remote Desktop connection is enabled on your Home Server.
---------------------------------------------------------
Checking if Remote Desktop Connection is allowed by Group Policy......
PASS: Remote Desktop connection is allowed by Group Policy.
---------------------------------------------------------
Checking Windows Firewall settings on your Home Server......
PASS: Windows Firewall is enabled on your Home Server.
---------------------------------------------------------
Checking if Exception is allowed by Windows Firewall......
PASS: Exception is allowed by Windows Firewall.
---------------------------------------------------------
Checking if Remote Desktop proxy port is allowed by Windows Firewall......
PASS: Remote Desktop proxy port is allowed
---------------------------------------------------------
Checking if Remote Desktop is allowed by Windows Firewall......
PASS: Remote Desktop is allowed by Windows Firewall.
---------------------------------------------------------
Checking Website: "RemoteAccess"
Checking path: "c:\inetpub\remote"
PASS: Website RemoteAccess files are ok.
---------------------------------------------------------
Checking Website: "PublicLanding"
Checking path: "c:\inetpub\home"
PASS: Website PublicLanding files are ok.
---------------------------------------------------------
Checking Website: "Welcome"
Checking path: "c:\inetpub\upnp"
PASS: Website Welcome files are ok.
---------------------------------------------------------
PASS: End checking Windows Home Server website files......
---------------------------------------------------------
Checking IIS service status...
PASS: IIS service status: Running
---------------------------------------------------------
Checking Windows Home Server App Pool Status......
PASS: Windows Home Server AppPool is on.
---------------------------------------------------------
Checking default IIS site on your Windows Home Server......
PASS: Default website is Windows Home Server Site






In mijn livebox staan de poorten open dus lijkt me ook oke.

Naam Geactiveerd Protocol Van poort Tot poort Lokaal IP-adres Actie
remote desktop Ja TCP 3389 3389 192.168.1.70

remote desktop Ja UDP 3389 3389 192.168.1.70

WHS_4125 Ja TCP 4125 4125 192.168.1.70

whs 80 Ja TCP 80 80 192.168.1.70

whs 443 Ja TCP 443 443 192.168.1.70

Verder hebben al mijn pc's static ip adressen buiten de DHCP om.

De trouble shooter geeft het volgende aan:

The Windows Home Server Connector Troubleshooter tests are now complete.
Potential issues are displayed below. It is important to follow the recommendations to resolve potential Windows Home Server issues.

The version of the Connector software does not match the version of Windows Home Server
Get help with this issue

Cannot connect to the server secure internal Web site
Cannot connect to the server internal Web site (password hint page)
Cannot connect to the server internal Web site (ASPX page)
Cannot connect to the server internal Web site over IP address (password hint page)
Cannot connect to the server internal Web site over IP address (ASPX page)
No DHCP server, or DHCP server is not reachable


Wie weet wat ik verkeerd doe?
oh ja ik heb een pc met windows 7 en één met XP allebij geen contact.
 
een andere pc al geprobeert ? je router een keer uit en aan gezet ?

en dan via whs software (op de server zelf) even alles opnieuw instellen...
 
een andere pc al geprobeert ? je router een keer uit en aan gezet ?

en dan via whs software (op de server zelf) even alles opnieuw instellen...

Andere pc geprobeerd en router aan en uit gezet. Maar wat bedoel je met via de whs software op de server zelf. ik heb de software van de server gehaald via 55000 als je dat bedoelt.

wat zou ik zoal opnieuw in kunnen stellen?

Groetjes Jorn
 
Dcom

Ik zie iets in de eventlogger wat het probleem zou kunnen zijn:

DCOM got error "The service did not respond to the start or control request in a timely fashion. " attempting to start the service WSearch with arguments "" in order to run the server:

event 10005

is dit het probleem? zo ja hoe los ik dit op?
 
Dcom

Ik zie iets in de eventlogger wat het probleem zou kunnen zijn:

DCOM got error "The service did not respond to the start or control request in a timely fashion. " attempting to start the service WSearch with arguments "" in order to run the server:

event 10005

is dit het probleem? zo ja hoe los ik dit op?
 
Status
Niet open voor verdere reacties.
Terug
Bovenaan Onderaan