Moederbord hulp

Status
Niet open voor verdere reacties.

Revan

Gebruiker
Lid geworden
10 nov 2007
Berichten
40
Ik wil graag een nieuw moederbord kopen en weet iemand of mijn processor:

Intel Pentium 4
Socket 478 Processor
2.8GHZ (2800MHZ)
2.80\512\800
800FSB
SL6WJ

op dit moederbord past?:

Specificaties Asrock P4VM8 (bios versie 1.30):


Platform: Micro ATX Form Factor: 9.6-in x 8.0-in, 24.4 cm x 20.3 cm
CPU: Socket 478, supports Intel® Pentium® 4 (Prescott, Northwood,Willimate) / Celeron® processor
Chipsets: North Bridge: VIA PM800, FSB @ 800/533/400 MHz,
with Intel® Hyper-Threading Technology ready
South Bridge: VIA VT8237R, supports USB 2.0, ATA 133, SATA 1.5Gb/s
Memory: 2 DDR DIMM Slots: DDR1 and DDR2
1 DDR DIMM Slot Supports PC3200 (DDR400), Max. 1GB,
2 DDR DIMM Slots Supports PC2700 (DDR333) /
PC2100 (DDR266), Max. 2GB
IDE: IDE1: ATA 133 / Ultra DMA Mode 6
IDE2: ATA 133 / Ultra DMA Mode 6
Supports up to 4 IDE devices
Serial ATA: 2 SATA connectors
Support up to 1.5Gb/s data transfer rate
Floppy Port: Supports up to 2 floppy disk drives
Audio: 5.1 channels AC’97 Audio
OnBoard VGA: S3 UnichronR PRO, supports DX7 H / W
LAN: Speed: 802.3u (10/100 Ethernet), supports Wake-On-LAN
Hardware Monitor: CPU temperature sensing
Chassis temperature sensing
CPU overheat shutdown to protect CPU life
(ASRock U-COP)(see CAUTION 2)
CPU fan tachometer
Chassis fan tachometer
Voltage monitoring: +12V, +5V, +3.3V, Vcore
PCI slots: 3 slots with PCI Specification 2.2, PCI3 slot shared with AMR
AGP slot: 1 AGP slot, supports 1.5V, 8X/4X AGP card (see CAUTION 3)
AMR slot: 1 slot, supports ASRock MR card
USB 2.0: 8 USB 2.0 ports:
include 6 ready-to-use USB 2.0 ports on the rear panel,
plus two on-board headers supporting 2 extra USB 2.0 ports
ASRock I/O PlusTM: 1 PS/2 mouse port, 1 PS/2 keyboard port,
1 VGA port,
1 parallel port: ECP/EPP support,
6 ready-to-use USB 2.0 ports,
1 RJ 45 port,
Audio Jack: Line In / Line Out / Microphone
BIOS: AMI BIOS
Supports “Plug and Play”
ACPI 1.1 compliance wake up events
Supports jumperfree
SMBIOS 2.3.1 support
CPU frequency stepless control
 
die past daar gewoon op bus speeds zijn het zelfde 800 dus het gaat werken.
 
Nee, sorry
SD-ram past niet op het moederbord, je zal hiervoor DDR geheugen moeten aanschaffen.
 
Status
Niet open voor verdere reacties.
Terug
Bovenaan Onderaan