netwerkkaart installatie geeft ndis fout

Status
Niet open voor verdere reacties.

overmacht

Gebruiker
Lid geworden
4 aug 2002
Berichten
143
ik probeer een netwerkkaart te installeren op een win 98 machine. wat ik al heb gedaan:
- netwerkkaart in pc gedaan
- met floppy na boot kaart geinstalleerd
- daarna pc opnieuw opgestart
- tijdens opstarten: foutmelding: "tijdens de installatie van apparaat NDIS: beschermingsfout van windows. u dient d computer opniuw op te starten"
- nog een keer opgestart weer hetzelfde
- veilige modus apparaat verwijderd, reboot
- weer apparaat geinstalleeerd, nu wel in windows gekomen
- weer reboot
- nu krijg ik weer die foutmelding

wat kan ik doen om dit te verhelpen?
 
Dit schijnt een fix te zijn voor je probleem. Ben benieuwd of het werkt. http://home.planet.nl/~jimvandorp/download/ndis.zip Moet in de veilige modus gedaan worden

Groetjes, Tanja

ps dit is wat er stond:



"While initializing device NDIS: Windows protection error"

Click on the error message to see the accompanying reason. No >2.1GHz processors for Win98FE. (Microsoft-speak: "Windows Protection Error in NDIS with a CPU That Is Faster Than 2.1 GHz"
Well, as I wasn't prone to call the US for support, I asked in a Microsoft Usenet Newsgroup where I could obtain the fix. Within the hour I had an email address of someone who could help me, and after mailing him my question he responded within six hours (the next morning)! The fix worked like a charm.
Kudos to Clive, for providing me with the fix. It works both on the North-American as on my Dutch Win98 system ("tijdens initialisatie van apparaat NDIS: beschermingsfout van Windows. U dient uw computer opnieuw op te starten") . If you encountered the same problem, you can download the fix here. Start your freshly installed - but non-starting Windows in Safe Mode, and apply the patch. The problem is history.
official support 0 - unofficial support 2. Place your next bets!
 
Laatst bewerkt:
perfect! probleem is nu alleen dat las ik er nu een modem bij doe, hij bij de installatie daarvan crashed... het is een modem premier series 56 k modem.
 
als ik de driver wil installeren en de file aanwijs op de cdrom en darna ok druk sringt het scherm gelijk op zwart en daarna een van de bekende blauwe schermen met de melding uitzondering OE op 0028:C001539A waarna een reboot noodzakelijk is... wat is dit nou weer.....
 
hoe bedoel je crashed? Krijg je een foutmelding? of loopt hij vast? Heb je de juiste drivers?
Groetjes, Tanja

[edit] o, je hebt deze vragen hierboven al beantwoord, je was sneller dan ik:D [/edit]
 
als ik na de vorige melding op alt ctrl del druk staat er : uitzondering 0E is opgetreden op 0028:c000a980 in vxd ---. dit is aangeroepen vanaf 0028:c000c0a7 in vxd ---. u kunt mogelijk normaal doorgaan.

ik kan niet normaal doorgaan. na drukken van een toets gebeurt er nix
 
Kun je wel het stukje van Microsoft resolution in de veilige modus doen? F8 meen ik, anders F5 (net na het opstarten)

ps over die nieuwe meldingen kan ik niets vinden

Groetjes, Tanja
 
ook als ik de drivers niet installeer loopt hij vast met de zelfde meldingen.... als ik de kaart eruit haal loopt hij (logisch) niet meer vast...

mccafee staat niet op deze pc nee...
 
probeer hem eens in een ander slot te steken? Misschien geeft hij conflicten in dit slot
Groetjes, Tanja
 
die nieuwe kaart geeft hetzelfde probleem... mbt die link: het gaat niet om aol, lijkt mij niet het probleem...
 
Helaas, omdat bij punt 7 dial-up adapter stond hoopte ik dat het er iets mee te maken had.

Ik weet het nu helaas ook niet meer. Ik hoop dat iemand anders je verder kan helpen.

Succes!! Ik hoop dat je er nog uitkomt!

Groetjes, Tanja
 
Laatste poging. Heb je wel de juiste protocollen ingesteld? netbeui

Fatal Exception 0E error 0028:C001539A followed by 0246:013F47FB often when using the Internet Connection, or Explorer caused an invalid page fault in module Kernel32.dll at 0027:bff 715a9 or fatal exception 0E has occurred at 0028:C001539A

We currently do not have a solution for this problem. Some possible causes follow.

1) it could be a conflict with McAfee VirusShield, remove it and see if the problem goes away
2) right click your network neighborhood click properties, and check to see if you have the NetBIOS or NetBEUI protocols installed. Neither of these are needed for standard internet access and are only used by older networks to communicate with other local computers. if you have either you might try removing them to see if it helps
3) Run SFC to check for corrupt files
4) It might be caused by DirectX upgrades.
5) It might be caused by the video card just when it tries to switch to a higher resolution mode like 3D. Lowering the video acceleration might help in this case

6) another possible fix is installing the Microsoft Security patch MS00-017

Groetjes, Tanja
 
nee kan de oplossing er niet bij vinden... ik weet het nu ook echt niet meer...
 
Status
Niet open voor verdere reacties.
Terug
Bovenaan Onderaan