matthijs27
Gebruiker
- Lid geworden
- 11 jan 2009
- Berichten
- 112
Hallo,
Vandaag wil mijn ASUS BW-16D1H-U Pro Blu Ray Brander opeens geen Dual Layer discs branden!
Eerder deze week was er totaal geen probleem, maar vandaag drama!
CD's, DVD's (met 1 laag) geen probleem, maar met een Dual Layer (dus meerdere lagen) gaat de brander even branden, ma na een paarseconden stopt het brand proces en krijg ik een foutmelding!
Dit gebeurd met verschillende merken discs, in verschillende programma's en snelheden. Ook de firmware is up-to-date, en met de "apparaat verwijder" functie van Windows blijft dit probleem bestaan!
Omdat dit geintje wel erg veel van mijn Dual Layer discs kost roep ik nu jullie hulp in!
Kunnen jullie mij verder helpen?
Hier een overzicht van de foutmelding van Nero
Foutmelding van tweede programma
Vandaag wil mijn ASUS BW-16D1H-U Pro Blu Ray Brander opeens geen Dual Layer discs branden!
Eerder deze week was er totaal geen probleem, maar vandaag drama!
CD's, DVD's (met 1 laag) geen probleem, maar met een Dual Layer (dus meerdere lagen) gaat de brander even branden, ma na een paarseconden stopt het brand proces en krijg ik een foutmelding!
Dit gebeurd met verschillende merken discs, in verschillende programma's en snelheden. Ook de firmware is up-to-date, en met de "apparaat verwijder" functie van Windows blijft dit probleem bestaan!
Omdat dit geintje wel erg veel van mijn Dual Layer discs kost roep ik nu jullie hulp in!
Kunnen jullie mij verder helpen?
Hier een overzicht van de foutmelding van Nero
Windows 8 6.2
AMD64
Wow64Process
Nero Version: 22.0.1.4
Internal Version: 22,0,1,4
(Nero Express)
Recorder : <ASUS BW-16D1H-U> FW version: E114 - HA 1 TA 1 - 22.0.1.4
Device bus : <> HA 1
Host system bus : <USB 2>
Drive buffer : 4000kB
Bus Type : via Inquiry data
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD/DVD-ROM : <ASUS BW-16D1H-U > FW version: E114 - HA 1 TA 1 - 22.0.1.4
Device bus : <> HA 1
Host system bus : <USB 2>
=== Scsi-Device-Map ===
: NVMe KINGSTON RBUSNS811.C stornvme Port 0 ID 0 DMA: Off
: HGST HTS721010A9E630 JB0O iaStorAC Port 1 ID 5 DMA: Off
=== CDRom-Device-Map ===
ASUS BW-16D1H-U E: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 24 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.5.2020
UDF-compilatie
00:28:45 #1 Text 0 File SCSIPTICommands.cpp, Line 617
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
00:28:47 #2 Text 0 File Isodoc.cpp, Line 7733
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
00:28:47 #3 PHASE 214 File dlgbrnst.cpp, Line 2108
Generation of disc structures started
00:28:47 #4 Text 0 File compose.cpp, Line 970
GenUDF2: 1 transfer items prepared.
00:28:47 #5 PHASE 215 File dlgbrnst.cpp, Line 2108
Generation of disc structures completed
00:28:47 #6 Text 0 File Burncd.cpp, Line 4232
Turn on Disc-At-Once, using DVD media
00:28:47 #7 Text 0 File DlgWaitCD.cpp, Line 336
[E: BW-16D1H-U ] Last possible write address on media: 4173823
Last address to be written: 27119
00:28:47 #8 Text 0 File DlgWaitCD.cpp, Line 348
[E: BW-16D1H-U ] Write in overburning mode: NO (enabled: CD)
00:28:47 #9 Text 0 File DlgWaitCD.cpp, Line 3152
Recorder: ASUS BW-16D1H-U, Media type: DVD+R DL
Disc Manufacturer ID: <MBIPG101>, Media Type ID: <R10>, Product revision number: 65
Disc Application Code: 0, Extended Information Indicators: 3
00:28:47 #10 Text 0 File DlgWaitCD.cpp, Line 538
[E: BW-16D1H-U ] >>> Protocol of DlgWaitCD activities: <<<
=========================================
00:28:47 #11 Text 0 File ThreadedTransferInterface.cpp, Line 879
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 27120 (27120) = #27120/6:1.45
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 27120 blocks [E: ASUS BW-16D1H-U]
--------------------------------------------------------------
00:28:47 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1095
Prepare [E: ASUS BW-16D1H-U] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 55541760, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 27120 | 0 | 0x00
27120 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
MediaType: DVD+R DL
00:28:47 #13 Text 0 File SCSIPTICommands.cpp, Line 404
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
00:28:47 #14 Text 0 File Burncd.cpp, Line 5130
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
00:28:47 #15 PHASE 24 File dlgbrnst.cpp, Line 2108
Caching of files started
00:28:47 #16 Text 0 File Burncd.cpp, Line 5252
Cache writing successful.
00:28:47 #17 PHASE 25 File dlgbrnst.cpp, Line 2108
Caching of files completed
00:28:47 #18 PHASE 36 File dlgbrnst.cpp, Line 2108
Burn process started at 4x (5.540 kB/sec)
00:28:48 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2926
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
00:28:48 #20 SPTI -1066 File SCSIPassThrough.cpp, Line 225
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x0e287640: Len x648
00:28:48 #21 Text 0 File DVDPlusDualLayer.cpp, Line 1945
GetDriveCaps: LAST LBA of layer 1 is 0
00:28:48 #22 Text 0 File DVDPlusDualLayer.cpp, Line 1464
SetDriveCaps: Set LAST LBA of layer 1 to 242447
00:28:48 #23 Text 0 File DVDPlusDualLayer.cpp, Line 1945
GetDriveCaps: LAST LBA of layer 1 is 242447
00:28:48 #24 Text 0 File DVDPlusDualLayer.cpp, Line 622
Disc finalized, LBA total Image size: 27120 (52MB), Last LBA L0: 242447 (473MB)
00:29:06 #25 SPTI -1066 File SCSIPassThrough.cpp, Line 225
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x0e23e9c0: Len x804
00:29:06 #26 Text 0 File DVDPlusDualLayer.cpp, Line 1464
SetDriveCaps: Set LAST LBA of layer 1 to 242447
00:29:06 #27 Text 0 File DVDPlusDualLayer.cpp, Line 1945
GetDriveCaps: LAST LBA of layer 1 is 242447
00:29:06 #28 Text 0 File DVDPlusDualLayer.cpp, Line 789
L0 Data Zone Capacity set to 242448 (3B310h, 473MB) -> OK, confirmed setting
00:29:06 #29 CDR -1205 File DVDPlusDualLayer.cpp, Line 816
Burning Layer 1
00:29:06 #30 Text 0 File DVDPlusDualLayer.cpp, Line 826
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
00:29:06 #31 Text 0 File Cdrdrv.cpp, Line 10845
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MBIPG101
Media type ID: R10
Product revision number: 65
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16..783]:
00 00 03 4D 42 49 50 47 - 31 30 31 52 31 30 41 40 ...MBIPG101R10A@
25 25 37 10 00 2C 6C 00 - 2C 6C 20 1F 0C 0C 14 14 %%7..,l.,l......
02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................
04 00 33 7B 5C 00 25 69 - 3A 26 1C 0A 0B 20 02 01 ..3{\.%i:&......
01 00 00 58 62 42 26 1C - 0A 0B 20 02 01 01 00 5F ...XbB&........_
84 00 00 43 66 3E 26 1C - 0A 0B 20 02 01 01 00 00 ...Cf>&.........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
E1 0F 32 10 00 03 00 00 - 00 FC FF FF 00 22 D7 FF ..2.........."..
00 00 03 4D 42 49 50 47 - 31 30 31 52 31 30 41 40 ...MBIPG101R10A@
25 25 37 15 00 2D 6D 00 - 2D 6D 19 19 0C 0B 0E 0E %%7..-m.-m......
00 00 00 10 00 19 19 0C - 0B 0E 0E 00 00 00 10 00 ................
04 00 33 7B 5C 00 2C 6D - 4B 19 10 05 04 10 00 00 ..3{\.,mK.......
00 00 00 55 65 3B 24 16 - 09 08 20 00 00 00 00 26 ...Ue;$........&
84 00 00 42 67 2F 24 16 - 09 08 20 00 00 00 00 00 ...Bg/$.........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00:29:06 #32 SPTI -1066 File SCSIPassThrough.cpp, Line 225
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x0e286140: Len x648
00:29:06 #33 Text 0 File DVDPlusRW.cpp, Line 639
Start write address at LBA 0
DVD high compatibility mode: Yes
00:29:06 #34 Text 0 File ThreadedTransfer.cpp, Line 275
Pipe memory size 83836800
00:29:06 #35 Text 0 File CUDFTransferItem2.cpp, Line 713
GenUDF2 FS Layout:
=-=-=-=-=-=-=-=-=-=-
Sectors to be written: 27120
Session Start: Sector 0
Volume Structure: Sector [0, 256] (257 Sectors)
Meta Data: Sector [257, 268] (12 Sectors)
Data: Sector [269, 26820] (26552 Sectors)
After Data: Sector [26821, 26831] (11 Sectors)
Trailer Track: Sector [26832, 27119] (288 Sectors)
GenUDF2 Parameters:
=-=-=-=-=-=-=-=-=-=-
PrepTime: 05-02-2020 00:28:47
UDF Revision: 1.02
UDF Partition Type: Physical
UDF Special Mode: None
Bytes per Sector: 2048
Session Start: 0
Physical Partition Start: -1
Total Capacity: 4173824
Multi Session Mode: None
Disc Type: DVD+R DL
OS Class: 0
Volume ID: test
Allow Unicode Labels: 0
Duplicate Meta Data: 1
MS Info File: 00000000
VMS Rollback File: 00000000
Create ISO bridge: 0
ECC Block Length: 16
Sparing Packet Length: 32
Allocation Unit Size: 32
Alignment Unit Size: 16
Make Writable: 0
Access Type: Read-only
00:29:16 #36 SPTI -1135 File SCSIPassThrough.cpp, Line 225
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
CDB Data: 0x2A 00 00 00 1B 80 00 00 20 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
Sense Area: 0x71 00 03 00 00 19 90 0E 00 00 00 00 0C
Buffer x18a39740: Len x10000
0x8D FF 93 8F 8E FF 92 8E 8D FF 93 8F 8E FF 95 91
0x8F FF 95 91 8F FF 95 91 8F FF 96 92 90 FF 96 92
0x91 FF 97 93 91 FF 96 92 90 FF 95 91 8E FF 96 92
00:29:16 #37 TRANSFER -20 File ThreadedTransfer.cpp, Line 1235
Could not perform Write
00:29:16 #38 CDR -1135 File Writer.cpp, Line 345
Write error
E: ASUS BW-16D1H-U
00:29:18 #39 SPTI -1176 File SCSIPassThrough.cpp, Line 225
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176)
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 72 04
00:29:18 #40 PHASE 127 File dlgbrnst.cpp, Line 2108
Generating DVD high compatibility borders
00:29:18 #41 Text 0 File DVDPlusRW.cpp, Line 903
EndDAO: Last written address 7040
00:29:18 #42 CDR -1176 File WriterStatus.cpp, Line 316
Session fixation error
E: ASUS BW-16D1H-U
00:29:18 #43 TRANSFER -24 File ThreadedTransfer.cpp, Line 1235
Could not perform end of Disc-at-once
00:29:18 #44 Text 0 File DVDPlusDualLayer.cpp, Line 1464
SetDriveCaps: Set LAST LBA of layer 1 to 0
00:29:18 #45 PHASE 38 File dlgbrnst.cpp, Line 2108
Burn process failed at 4x (5.540 kB/sec)
00:29:18 #46 Text 0 File SCSIPTICommands.cpp, Line 454
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
00:29:18 #47 Text 0 File Cdrdrv.cpp, Line 12297
DriveLocker: UnLockVolume completed
00:29:18 #48 Text 0 File SCSIPTICommands.cpp, Line 617
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Foutmelding van tweede programma
-------------------------- 2-5-2020 00:50:39 --------------------------
2-5-2020 00:50:39.224: DLLAV32.DLL loaded, all entry points available
2-5-2020 00:50:39.229: AVSDK MsgCbFunc registered
2-5-2020 00:50:39.232: AVSDK: StatCbFunc registered
2-5-2020 00:50:39.329: AVSDK Version 13.0.244
2-5-2020 00:50:39.332: ------------ Reading Device Info ----------------
2-5-2020 00:50:39.335: AVSDK: 1 device(s) found
2-5-2020 00:50:39.339: BurnSupport: 1 device(s) found
2-5-2020 00:50:39.342: Adapter=255 ID=2 LUN=0 E:ASUS BW-16D1H-U Revision:E114
2-5-2020 00:50:39.344: BurnSupport: 1 record device(s) available
2-5-2020 00:50:39.347: BurnSupport: E: ASUS BW-16D1H-U Rev. E114
2-5-2020 00:50:39.349: ------------ done ----------------
2-5-2020 00:50:39.548: setting no speed limit
2-5-2020 00:50:39.552: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
2-5-2020 00:50:39.613: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
2-5-2020 00:50:39.616: !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
2-5-2020 00:50:39.619: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
2-5-2020 00:51:39.275: WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
2-5-2020 00:51:39.278: DEVICE ARRIVED
2-5-2020 00:52:20.974: Open Project: ....................................................................................................
2-5-2020 00:52:20.978: VideoMode: PAL Temp Dir: C:\Users\...............................................................................................
2-5-2020 00:52:20.982: dll version 6.0.10.28
2-5-2020 00:52:20.985: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
2-5-2020 00:52:20.988: EstimateLayerSplitPoint()...
2-5-2020 00:52:20.991: Splitpunkt 4271833088 auf Disk mit Größe 8535375872
2-5-2020 00:52:20.993: Title an Stelle 0, Länge 8535375872, Typ 1
2-5-2020 00:52:20.996: Split berechnen...
2-5-2020 00:52:20.998: Title an Stelle 0, Länge 8535375872, Typ 1
2-5-2020 00:52:21.001: Split in HMOVIE 20afaf40, Position in Datei 4271833088
2-5-2020 00:52:23.231: Step 1 of 3, Encodeer film 1 ...
2-5-2020 00:52:23.235: Eintragen des Splitpunktes 4271833088 bei ConvertMovie(20afaf40)
2-5-2020 00:52:23.241: Step 1 done
2-5-2020 00:52:23.247: ConvertMovie() - encoded file: C:\Users\................................................................................................................................................................................................................................
2-5-2020 00:52:23.250: ConvertMovie() - encoded file: C:\Users\................................................................................................................................................................................................................................
2-5-2020 00:52:23.253: ConvertMovie() - encoded file: C:\Users\................................................................................................................................................................................................................................
2-5-2020 00:52:23.257: ConvertMovie() - encoded file: C:\Users\................................................................................................................................................................................................................................
2-5-2020 00:52:23.260: ConvertMovie() - encoded file: C:\Users\................................................................................................................................................................................................................................
2-5-2020 00:52:23.263: ConvertMovie() - encoded file: C:\Users\................................................................................................................................................................................................................................
2-5-2020 00:52:23.266: ConvertMovie() - encoded file: C:\Users\................................................................................................................................................................................................................................
2-5-2020 00:52:23.269: ConvertMovie() - encoded file: C:\Users\................................................................................................................................................................................................................................
2-5-2020 00:52:23.272: ConvertMovie() - encoded file: C:\Users\................................................................................................................................................................................................................................
2-5-2020 00:52:23.283: Step 2 of 3, Maak disk-image ...
2-5-2020 00:52:48.708: Step 2 done
2-5-2020 00:52:51.278: Step 3 of 3
2-5-2020 00:52:51.282: ---------------------------------------------------------------
2-5-2020 00:52:51.285: CheckForLayerSplit(size=4273995776, strat=2)
2-5-2020 00:52:51.288: Splitpunkt gesetzt auf 4268752896)
2-5-2020 00:52:51.291: Prüfen, ob gesplittet werden muss...
2-5-2020 00:52:51.294: ... Split notwendig
2-5-2020 00:52:51.296: Split genau auf Dateiende, -> keine Aktion
2-5-2020 00:52:51.299: Step 3 done
2-5-2020 00:52:51.305: requested recorder feature:
2-5-2020 00:52:51.308: cache size: 16,000000.1 MB
2-5-2020 00:52:51.311: write speed: 10820,312500.1 KB/s
2-5-2020 00:52:51.313: book type: 2
2-5-2020 00:52:51.317: burn over: no
2-5-2020 00:52:51.319: simulate: no
2-5-2020 00:52:51.322: disc at once: no
2-5-2020 00:52:51.325: burn proof: yes
2-5-2020 00:52:51.328: format disc: no
2-5-2020 00:52:51.331: short leadout: no
2-5-2020 00:52:51.333: no defect mgmt: no
2-5-2020 00:52:51.337: verify after burn:no
2-5-2020 00:52:51.339: ------------ OpenRecorderSetOptions Point ----------------
2-5-2020 00:52:51.517: setting PoINT cache size to 16777216l
2-5-2020 00:52:51.521: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
2-5-2020 00:52:51.524: Booktype: DVD-ROM
2-5-2020 00:52:51.554: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
2-5-2020 00:52:51.557: setting write speed to 11080000 bytes/sec
2-5-2020 00:52:51.560: this equals 8,000000x DVD / 62,811790x CD Speed
2-5-2020 00:52:51.563: ------------ done: succeeded ----------------
2-5-2020 00:52:51.565: ------------ CreateAPIProject ----------------
2-5-2020 00:52:51.569: Step 3 of 3
2-5-2020 00:52:51.573: creating DVD project in prepfile mode...
2-5-2020 00:52:51.578: create volume... OK
2-5-2020 00:52:51.581: verify option OFF
2-5-2020 00:52:51.584: set project options... OK
2-5-2020 00:52:51.587: adding file "C:\Users\................................................................................................................................................................................................................................"
2-5-2020 00:52:51.592: adding file "C:\Users\................................................................................................................................................................................................................................"
2-5-2020 00:52:51.597: adding file "C:\Users\................................................................................................................................................................................................................................"
2-5-2020 00:52:51.601: adding file "C:\Users\................................................................................................................................................................................................................................"
2-5-2020 00:52:51.605: adding file "C:\Users\................................................................................................................................................................................................................................"
2-5-2020 00:52:51.609: adding file "C:\Users\................................................................................................................................................................................................................................"
2-5-2020 00:52:51.613: adding file "C:\Users\................................................................................................................................................................................................................................"
2-5-2020 00:52:51.617: adding file "C:\Users\................................................................................................................................................................................................................................"
2-5-2020 00:52:51.621: adding file "C:\Users\................................................................................................................................................................................................................................"
2-5-2020 00:52:51.625: adding file "C:\Users\................................................................................................................................................................................................................................"
2-5-2020 00:52:51.629: adding file "C:\Users\................................................................................................................................................................................................................................"
2-5-2020 00:52:51.632: Step 3 done
2-5-2020 00:52:51.636: ------------ done ----------------
2-5-2020 00:52:51.639: Step 3 of 3
2-5-2020 00:52:51.643: ------------ BurnToDisc ----------------
2-5-2020 00:52:51.648: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
2-5-2020 00:52:51.652: Booktype: DVD-ROM
2-5-2020 00:52:51.655: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
2-5-2020 00:52:51.658: setting write speed to 11080000 bytes/sec
2-5-2020 00:52:51.660: this equals 8,000000x DVD / 62,811790x CD Speed
2-5-2020 00:52:51.663: mounting volume on device...OK
2-5-2020 00:52:51.666: Check on previously direct recorded session...OK
2-5-2020 00:52:51.669: -- Volume mounted --
2-5-2020 00:52:51.671: -- Recording on "E: ASUS BW-16D1H-U" --
2-5-2020 00:52:51.674: -- Medium is "dvd+r9DL" --
2-5-2020 00:52:51.677: -- Manufacturer "MBIPG101" --
2-5-2020 00:52:51.750: AVSDK Message - INFO: :Recording volume ...
2-5-2020 00:52:51.753: AVSDK Message - INFO: :Recording -> setting layer boundary address for DVD+R DL ...
2-5-2020 00:53:49.850: AVSDK Status - Begin operation Recording 3937024 sectors/frames
2-5-2020 00:53:49.856: AVSDK Message - INFO: :Recording -> writing data ...
2-5-2020 00:53:49.998: wrote LeadIn, start DataCopy
2-5-2020 00:53:59.465: AVSDK Message - ERROR: :Cannot write to disc -> Write error (SK/ASC/ASCQ 03/0C/00)
2-5-2020 00:54:21.286: AVSDK Message - ERROR: :Cannot write or close track -> Session fixation error, possibly caused by write error or by an incomplete track (SK/ASC/ASCQ 04/72/FF)
2-5-2020 00:54:21.996: AVSDK Status - End operation Recording 3937024 sectors/frames
2-5-2020 00:54:21.999: AVSDK Message - INFO: :Recording failed due to write error on disc
2-5-2020 00:54:22.002: !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 206 - write error occurred on disc !!!
2-5-2020 00:54:22.005: !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 224 - write error occurred on disc !!!
2-5-2020 00:54:22.009: ------------ done ----------------
2-5-2020 00:54:22.012: Step 3 done
2-5-2020 00:54:22.015: project burning failed
2-5-2020 00:54:22.048: !!! DBK error in CBurnDevSupport::BurnProject(): 224 - write error occurred on disc !!!
2-5-2020 00:54:22.052: !!! DBK error in BurnProject: 224 - write error occurred on disc !!!