Mijn computer is een paar dagen geleden gecrasht door een virus. Dit virus had alle bestanden op de harde schijf verwijderd. Voordat het virus toesloeg werkte alles perfect. Ik werkte met Nero (exacte versie weet ik niet meer 6.x) en DVd shrink.
Ik heb een Dell dimension 8300 met een NEC DVD+RW ND-2100AD.
Na de format installeerde ik WINDOWS Unatendent met daarin Nero, versie 6.6.0.14 NL.
Na alles weer draaiende te hebben wilde ik een image.bestand branden met Nero via DVD shrink. Dit was in mijn voorgaande configuratie geen probleem. Nero werkte perfect samen met mijn DVD recorder.
Nu kreeg ik echter een foutmelding zodra het brandproces aanving. DVD-shrink en Nero herkennen wel beide de DVD recorder. Ik heb vervolgens andere schijfjes en een ander image file geprobeerd te branden. Ook dit mislukte en ik kreeg dezelfde foutmelding. Wat wel lukte was het kopieren van een muziekCD ?
De DVD recorder wordt herkend door Windows en volgens Windows zijn de drivers goed geinstalleerd en werkzaam...!!!
Als ik een film in de DVD brander doe, herkend die deze niet en blijft het venster van de brander leeg. Data van bijvoorbeeld een installatie CD herkend de brander wel. maf hé...!!!
kan iemand mij vertellen wat er aan de hand zou kunnen zijn. Ik weet het echt niet meer.
Moet ik nieuwe firmware (kan ik op de site van DELL niet vinden, kan a.s. maandag pas bellen) of een nieuwere versie van Nero
installeren, of is er iets anders aan de hand. Wie is bekend met dit probleem.
Voor de echte kenners heb ik hieronder de log van de foutmelding geplaatst (let op dit is nogal wat tekst)
alvast bedankt...!!!
1A23-0609-9030-2482-6953-8220
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10-9-1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26-10-2004 18:35:34
Nero API version: 6.6.0.14
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 14d
Recorder: <_NEC DVD+RW ND-2100AD> Version: 106F - HA 0 TA 1 - 6.6.0.14
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+RW ND-2100AD atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD1200JD-75GBB0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616T D: CDRom0
_NEC DVD+RW ND-2100AD E: CDRom1
Generic DVD-ROM F: CDRom2
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047548kB)
Free physical memory: 586MB (601072kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.9.2005
NeroAPI
15:54:57 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
15:54:57 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
15:54:57 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
15:54:57 #4 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0AE74E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
15:54:57 #5 Text 0 File Reader.cpp, Line 127
Reader running
15:54:57 #6 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD+RW ND-2100AD running
15:54:57 #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
15:54:57 #8 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)
15:54:57 #9 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)
15:54:57 #10 Text 0 File Burncd.cpp, Line 3230
Turn on Disc-At-Once, using DVD media
15:54:57 #11 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
15:54:57 #12 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO
15:54:57 #13 Text 0 File DlgWaitCD.cpp, Line 2433
Recorder: _NEC DVD+RW ND-2100AD, Media type: DVD+R
15:54:57 #14 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
15:54:57 #15 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [_NEC DVD+RW ND-2100AD]
--------------------------------------------------------------
15:54:57 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [_NEC DVD+RW ND-2100AD] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
15:54:57 #17 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
15:54:57 #18 Text 0 File Burncd.cpp, Line 4114
Cache writing successful.
15:54:57 #19 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
15:54:57 #20 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2.4x (3.324 KB/s)
15:54:57 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
15:54:57 #22 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0AE75600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
15:54:57 #23 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0AE74E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
15:54:57 #24 Text 0 File DVDPlusRW.cpp, Line 655
Start write address at LBA 0
DVD high compatibility mode: Yes
15:55:00 #25 SCSI -1015 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0CE10000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x02
15:55:00 #26 CDR -1015 File Writer.cpp, Line 311
Calibration area full
15:55:00 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
15:55:00 #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
15:55:01 #29 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders
15:55:01 #30 Phase 129 File APIProgress.cpp, Line 276
Generating DVD borders completed successfully
15:55:01 #31 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0AE74E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
15:55:01 #32 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 2.4x (3.324 KB/s)
15:55:01 #33 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
15:55:01 #34 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10-9-1999 12:06:00
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Ik heb een Dell dimension 8300 met een NEC DVD+RW ND-2100AD.
Na de format installeerde ik WINDOWS Unatendent met daarin Nero, versie 6.6.0.14 NL.
Na alles weer draaiende te hebben wilde ik een image.bestand branden met Nero via DVD shrink. Dit was in mijn voorgaande configuratie geen probleem. Nero werkte perfect samen met mijn DVD recorder.
Nu kreeg ik echter een foutmelding zodra het brandproces aanving. DVD-shrink en Nero herkennen wel beide de DVD recorder. Ik heb vervolgens andere schijfjes en een ander image file geprobeerd te branden. Ook dit mislukte en ik kreeg dezelfde foutmelding. Wat wel lukte was het kopieren van een muziekCD ?
De DVD recorder wordt herkend door Windows en volgens Windows zijn de drivers goed geinstalleerd en werkzaam...!!!
Als ik een film in de DVD brander doe, herkend die deze niet en blijft het venster van de brander leeg. Data van bijvoorbeeld een installatie CD herkend de brander wel. maf hé...!!!
kan iemand mij vertellen wat er aan de hand zou kunnen zijn. Ik weet het echt niet meer.
Moet ik nieuwe firmware (kan ik op de site van DELL niet vinden, kan a.s. maandag pas bellen) of een nieuwere versie van Nero
installeren, of is er iets anders aan de hand. Wie is bekend met dit probleem.
Voor de echte kenners heb ik hieronder de log van de foutmelding geplaatst (let op dit is nogal wat tekst)
alvast bedankt...!!!
1A23-0609-9030-2482-6953-8220
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10-9-1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26-10-2004 18:35:34
Nero API version: 6.6.0.14
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 14d
Recorder: <_NEC DVD+RW ND-2100AD> Version: 106F - HA 0 TA 1 - 6.6.0.14
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+RW ND-2100AD atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD1200JD-75GBB0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616T D: CDRom0
_NEC DVD+RW ND-2100AD E: CDRom1
Generic DVD-ROM F: CDRom2
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047548kB)
Free physical memory: 586MB (601072kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.9.2005
NeroAPI
15:54:57 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
15:54:57 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
15:54:57 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
15:54:57 #4 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0AE74E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
15:54:57 #5 Text 0 File Reader.cpp, Line 127
Reader running
15:54:57 #6 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD+RW ND-2100AD running
15:54:57 #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
15:54:57 #8 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)
15:54:57 #9 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)
15:54:57 #10 Text 0 File Burncd.cpp, Line 3230
Turn on Disc-At-Once, using DVD media
15:54:57 #11 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
15:54:57 #12 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO
15:54:57 #13 Text 0 File DlgWaitCD.cpp, Line 2433
Recorder: _NEC DVD+RW ND-2100AD, Media type: DVD+R
15:54:57 #14 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
15:54:57 #15 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [_NEC DVD+RW ND-2100AD]
--------------------------------------------------------------
15:54:57 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [_NEC DVD+RW ND-2100AD] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
15:54:57 #17 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
15:54:57 #18 Text 0 File Burncd.cpp, Line 4114
Cache writing successful.
15:54:57 #19 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
15:54:57 #20 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2.4x (3.324 KB/s)
15:54:57 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
15:54:57 #22 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0AE75600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
15:54:57 #23 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0AE74E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
15:54:57 #24 Text 0 File DVDPlusRW.cpp, Line 655
Start write address at LBA 0
DVD high compatibility mode: Yes
15:55:00 #25 SCSI -1015 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0CE10000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x02
15:55:00 #26 CDR -1015 File Writer.cpp, Line 311
Calibration area full
15:55:00 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
15:55:00 #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
15:55:01 #29 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders
15:55:01 #30 Phase 129 File APIProgress.cpp, Line 276
Generating DVD borders completed successfully
15:55:01 #31 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0AE74E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
15:55:01 #32 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 2.4x (3.324 KB/s)
15:55:01 #33 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
15:55:01 #34 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10-9-1999 12:06:00
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Laatst bewerkt:
