Ik denk dat dit wel de goeie zijn.sinds ik met dxdiag okk ging controleren.
Bekijk bijlage DxDiag.txt
CPU-Z TXT Report
-------------------------------------------------------------------------
Binaries
-------------------------------------------------------------------------
CPU-Z version 1.56
Processors
-------------------------------------------------------------------------
Number of processors 1
Number of threads 4
APICs
-------------------------------------------------------------------------
Processor 0
-- Core 0
-- Thread 0 0
-- Core 1
-- Thread 0 1
-- Core 2
-- Thread 0 2
-- Core 3
-- Thread 0 3
Processors Information
-------------------------------------------------------------------------
Processor 1 ID = 0
Number of cores 4 (max 4)
Number of threads 4 (max 4)
Name Intel Core 2 Quad Q6600
Codename Kentsfield
Specification Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Package (platform ID) Socket 775 LGA (0x4)
CPUID 6.F.B
Extended CPUID 6.F
Core Stepping G0
Technology 65 nm
Core Speed 1593.5 MHz
Multiplier x FSB 6.0 x 265.6 MHz
Rated Bus speed 1062.3 MHz
Stock frequency 2400 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, EM64T, VT-x
L1 Data cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 2 x 4096 KBytes, 16-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 9.0x
Max VID 1.313 V
Thread dumps
-------------------------------------------------------------------------
CPU Thread 0
APIC ID 0
Topology Processor ID 0, Core ID 0, Thread ID 0
Type 01008005h
Max CPUID level 0000000Ah
Max CPUID ext. level 80000008h
Cache descriptor Level 1, D, 32 KB, 1 thread(s)
Cache descriptor Level 1, I, 32 KB, 1 thread(s)
Cache descriptor Level 2, U, 4 MB, 2 thread(s)
Chipset
-------------------------------------------------------------------------
Northbridge Intel Q45/Q43 rev. 03
Southbridge Intel 82801JB (ICH10) rev. 02
Memory Type DDR2
Memory Size 4096 MBytes
Channels Dual, (Symmetric)
Memory Frequency 332.0 MHz (4:5)
CAS# latency (CL) 5.0
RAS# to CAS# delay (tRCD) 5
RAS# Precharge (tRP) 5
Cycle Time (tRAS) 15
Row Refresh Cycle Time (tRFC) 44
Command Rate (CR) 2T
MCHBAR I/O Base address 0x0FED14000
MCHBAR I/O Size 4096
MCHBAR registers
Memory SPD
-------------------------------------------------------------------------
DIMM # 1
SMBus address 0x50
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) OCZ (7F7F7F7FB0000000)
Size 2048 MBytes
Max bandwidth PC2-5300 (333 MHz)
Part number OCZ2V6672G
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 3.0-3-3-9-12 @ 200 MHz
JEDEC #2 4.0-4-4-12-16 @ 266 MHz
JEDEC #3 5.0-5-5-15-20 @ 333 MHz
DIMM # 2
SMBus address 0x52
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) OCZ (7F7F7F7FB0000000)
Size 2048 MBytes
Max bandwidth PC2-5300 (333 MHz)
Part number OCZ2V6672G
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 3.0-3-3-9-12 @ 200 MHz
JEDEC #2 4.0-4-4-12-16 @ 266 MHz
JEDEC #3 5.0-5-5-15-20 @ 333 MHz
Hardware Monitors
-------------------------------------------------------------------------
Hardware monitor ITE IT87
