Site to site transfer failed

[Eagle Creek]

[R] PASV
[R] 227 Entering Passive Mode (195,85,134,27,186,152).
[L] PORT 195,85,134,27,186,152
[L] 500 Illegal PORT command
Site to Site Transfer Failed!
[R] Transfer Failed!
[L] PASV
[L] 227 Entering Passive Mode (195,121,6,132,130,238).
[R] PORT 195,121,6,132,130,238
[R] 500 Illegal PORT command
57 Files failed to transfer
User Aborted

Wanneer ik met FlashFXP van site naar site wil verplaatsen.

Enig idee?

De mappen gingen overigens wel goed

 

[upsidaisy]

Kan dit van invloed zijn:

Quote
I've tried everything but I can't get a site to site transfer to work, what is wrong?
A: Site to site transfers are not supported by some software/hardware configurations. Often, this is due to an incompatibility with NAT (Network Address Translation). NAT is not aware of site to site transfers and when it detects you are attempting to transfer a file, it modifies the FTP protocol to match your local "inside" IP. Several users have reported that Microsoft Internet Sharing is not compatible.
Unquote

 

[Eagle Creek]

Hmm... Niet ondersteund.

Waar heb je dit gevonden? Is dit te omzeilen?

 

[upsidaisy]

Door de warmte iets later:

Hier staan meerdere zaken


http://www.flashfxp.com/support.php?s=faq

 

[Eagle Creek]

Like a n00b .. De FAQ.

Q: When trying to transfer files from one site to another I keep getting this error 500 illegal port command.
A: The FTP Server is set up to not allow or doesn't support FXP. Located in the Site Manager on the Advanced tab, you will find the option "alternative fxp method". By enabling upload/download (depending on the direction of the transfer), you may be able to get the server to allow FXP. Note: It is common for some sites to only allow FXP in one direction and not the other. By enabling alternative fxp method, this problem is sometimes solved

Ga ik proberen, thx.