Bluray brander brand wel BD-re maar geen BD-r schijven

Status
Niet open voor verdere reacties.
H

hijack966

Gebruiker
Lid geworden
24 mei 2006
Berichten
69
Hallo,

Vandaag voor het eerst geprobeert om een bluray schijf BD-R te branden.
Hoervoor al meerdere malen bluray BD-RE (rewritables) met succes gebrand.

Maar bij het branden van een BD-R schijf (van PHILLIPS) krijg ik bij Nero de volgende fout:

"kon disc-at-once niet uitvoeren"

Blu-raybrander is een LG BH08LS20 firmware 2.0
Nero versie 10.6

Code: 
log van Nero:
8X01-208E-1M3K-A22T-6270-TW7H-****-****

Windows 7 6.1
AMD64
Wow64Process
Nero Version: 10.6.4.100
Internal Version: 10,6,4,100

Recorder:             <HL-DT-ST BD-RE  BH08LS20>Version: 2.00 - HA 1 TA 3 - 10.6.4.100
 Adapter driver:      <Serial ATA>              HA 1
 Drive buffer  :      4096kB
 Bus Type      :      via Inquiry data
CD-ROM:               <TYRMHSJ  VSHAFG9         >Version: 1.03 - HA 1 TA 1 - 10.6.4.100
 Adapter driver:      <IDE>                     HA 1

=== Scsi-Device-Map ===
CdRomPeripheral      : TYRMHSJ VSHAFG9         1.03  a3cimv3n Port 6 ID 0  DMA: Off

=== CDRom-Device-Map ===
TYRMHSJ VSHAFG9            L:   CdRom1
HL-DT-ST BD-RE  BH08LS20   G:   CdRom3
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 4095MB (4194303kB)
Free physical memory: 4095MB (4194303kB)
Memory in use       : 32 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0) 

7.10.2011
UDF-compilatie
14:52:17	#1 Text 0 File SCSIPTICommands.cpp, Line 464
	LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
14:52:17	#2 Text 0 File Isodoc.cpp, Line 7060
	UDF document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : TRUE
	Multisession type:      : Start multisession
	Burning mode            : DAO
	Mode                    : 1
	UDF Mode                : pure
	UDF Options             : automatic
	UDF Revision            : 1.02
	UDF Partition Type      : physical
	
14:52:17	#3 SPTI -1196 File SCSIPassThrough.cpp, Line 224
	CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1196)
	CDB Data:   0x52 01 00 00 00 FF 00 00 20 00 00 00 
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x02
	Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02 
	Buffer x0812d800: Len x20
	
14:52:17	#4 SPTI -1196 File SCSIPassThrough.cpp, Line 224
	CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1196)
	CDB Data:   0x51 00 00 00 00 00 00 00 20 00 00 00 
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x02
	Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02 
	Buffer x0812d800: Len x20
	
14:52:17	#5 SPTI -1196 File SCSIPassThrough.cpp, Line 224
	CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1196)
	CDB Data:   0x25 00 00 00 00 00 00 00 00 00 00 00 
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x02
	Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02 
	Buffer x081328c0: Len x8
	
14:52:17	#6 Text 0 File compose.cpp, Line 935
	GenUDF2: 1 transfer items prepared.
	
14:52:17	#7 SPTI -1196 File SCSIPassThrough.cpp, Line 224
	CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1196)
	CDB Data:   0x52 01 00 00 00 FF 00 00 20 00 00 00 
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x02
	Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02 
	Buffer x08282400: Len x20
	
14:52:17	#8 SPTI -1196 File SCSIPassThrough.cpp, Line 224
	CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1196)
	CDB Data:   0x51 00 00 00 00 00 00 00 20 00 00 00 
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x02
	Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02 
	Buffer x08282400: Len x20
	
14:52:17	#9 SPTI -1196 File SCSIPassThrough.cpp, Line 224
	CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1196)
	CDB Data:   0x25 00 00 00 00 00 00 00 00 00 00 00 
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x02
	Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02 
	Buffer x081328c0: Len x8
	
14:52:17	#10 Text 0 File compose.cpp, Line 935
	GenUDF2: 1 transfer items prepared.
	
14:52:17	#11 SPTI -1196 File SCSIPassThrough.cpp, Line 224
	CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1196)
	CDB Data:   0x51 00 00 00 00 00 00 00 20 00 00 00 
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x02
	Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02 
	Buffer x08282400: Len x20
	
14:52:17	#12 SPTI -1196 File SCSIPassThrough.cpp, Line 224
	CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1196)
	CDB Data:   0x52 01 00 00 00 FF 00 00 20 00 00 00 
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x02
	Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02 
	Buffer x08282400: Len x20
	
14:52:17	#13 SPTI -1196 File SCSIPassThrough.cpp, Line 224
	CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1196)
	CDB Data:   0x52 01 00 00 00 FF 00 00 20 00 00 00 
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x02
	Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02 
	Buffer x08282400: Len x20
	
14:52:17	#14 Text 0 File Burncd.cpp, Line 3591
	Turn on Disc-At-Once, using Blu-ray Disc media
	
14:52:17	#15 SPTI -1196 File SCSIPassThrough.cpp, Line 224
	CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1196)
	CDB Data:   0x51 00 00 00 00 00 00 00 20 00 00 00 
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x02
	Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02 
	Buffer x08282400: Len x20
	
14:52:17	#16 SPTI -1196 File SCSIPassThrough.cpp, Line 224
	CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1196)
	CDB Data:   0x52 01 00 00 00 FF 00 00 20 00 00 00 
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x02
	Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02 
	Buffer x08282400: Len x20
	
14:52:17	#17 SPTI -1196 File SCSIPassThrough.cpp, Line 224
	CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1196)
	CDB Data:   0x52 01 00 00 00 FF 00 00 20 00 00 00 
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x02
	Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02 
	Buffer x08282400: Len x20
	
14:52:45	#18 Text 0 File DlgWaitCD.cpp, Line 314
	[G: BD-RE  BH08LS20 ] Total disc capacity:     12219392    23866MB
	User data to be written:  8195872    16007MB
	Free space on disc:		 12219392    23866MB
	
14:52:45	#19 Text 0 File DlgWaitCD.cpp, Line 326
	[G: BD-RE  BH08LS20 ] Write in overburning mode: NO (enabled: CD)
	
14:52:45	#20 Text 0 File DlgWaitCD.cpp, Line 2917
	Recorder: HL-DT-ST BD-RE  BH08LS20, Media type: BD-R (seq)
	
14:52:45	#21 Text 0 File DlgWaitCD.cpp, Line 499
	[G: BD-RE  BH08LS20 ] >>> Protocol of DlgWaitCD activities: <<<
	=========================================
	Insert the disc to write to.
		(Medium in drive: Onbekend. Medium required by compilation: BD-R/RE, BD DL.)
	
14:52:45	#22 Text 0 File ThreadedTransferInterface.cpp, Line 861
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 8195872 (8195872) = #8195872/1821:18.22
	    relocatable, disc pos for caching/writing not required/ required
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 8195872 blocks [G: HL-DT-ST BD-RE  BH08LS20]
	--------------------------------------------------------------
	
14:52:45	#23 Text 0 File ThreadedTransferInterface.cpp, Line 1077
	Prepare [G: HL-DT-ST BD-RE  BH08LS20] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0   16785145856, ISRC ""
	DAO layout:
	===========
	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
	        0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   1 |    0x41 |  8195872 |        0 | 0x00
	  8195872 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
	MediaType: BD-R
	
14:52:45	#24 Text 0 File SCSIPTICommands.cpp, Line 251
	SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
	
14:52:45	#25 Text 0 File Burncd.cpp, Line 4428
	Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
	
14:52:45	#26 PHASE 24 File dlgbrnst.cpp, Line 1857
	Caching of files started
	
14:52:45	#27 Text 0 File Burncd.cpp, Line 4550
	Cache writing successful.
	
14:52:45	#28 PHASE 25 File dlgbrnst.cpp, Line 1857
	Caching of files completed
	
14:52:45	#29 PHASE 36 File dlgbrnst.cpp, Line 1857
	Burn process started at 2x (8,990 kB/sec)
	
14:52:45	#30 Text 0 File ThreadedTransferInterface.cpp, Line 2850
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
14:52:45	#31 Text 0 File Cdrdrv.cpp, Line 10507
	---- Disc Structure (BD): Disc Information on BD (00h) ----
	Media Type: 1, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 --- Header ---
	  Disc Information Identifier: <DI>
	  Disc Information Format: 01 h
	  Number of DI Units/Aux Frames in each DI block: 4
	  Number of (recording) layer to which this DI Unit applies: 0
	  DI unit Sequence Number in DI Block: 0
	  Continuation flag: Next DI Unit is the start of a new set of parameters (0)
	  Number of DI bytes in use in this DI unit: 98
	 --- Body ---
	  Disc Type Identifier: <BDR>
	  Disc Size/Class/Version: 1
	  DI Unit Format dependent contents:
	   BD Structure: 18 (12 h):
	    1 recording layer (SL), BD-R
	   Hybrid Disc identifier/Channel bit length: 1 (1 h):
	    no DVD layer present, no CD layer present
	    channel bit length of 74,5 nm (25.0 GB max. per layer)
	   Push-Pull polarity flag bits: 00 h
	   Recorded mark polarity flag bits: 00 h
	   BCA descriptor: BCA-code present (1)
	   Maximum transfer rate needed by the application: 0 Mbit/s
	   Data zone allocation:
	    First Physical ADIP Address of the Data Zone of the related layer (FAA): 00020000 h (131072)
	    Last Physical ADIP Address of the Data Zone of the related layer (LAA):  00194E7E h (1658494)
	   Recording velocities:
	    Nominal Recording Velocity: 4.92 m/s (1EC h)
	    Maximum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1
	    Minimum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1
	   ...
	   12 01 00 00 01 00 00 00 - 00 00 00 00 00 02 00 00
	   00 19 4E 7E 01 EC 64 64 - 28 28 28 28 1E 1E 1E 1E
	   00 00 00 00 5E 60 6F 08 - 08 4C 1A 87 90 20 20 20
	   20 20 20 20 20 30 30 30 - 30 70 00 70 00 70 00 70
	   00 68 00 68 00 68 00 68 - 00 68 00 68 00 68 00 68
	   00 90 90 C0 C0 C0 00 00
	 --- Trailer ---
	  Disc Manufacturer ID: 49 4E 46 4F 4D 45 h <INFOME>
	  Media Type ID: 52 33 30 <R30>
	  Time Stamp [m:y]: 0 : 0000 (00 00 h)
	  Product Revision Number: 0
	
14:52:45	#32 Text 0 File BD.cpp, Line 414
	Allocated spare area size on disc 4a0000h
	BD: Start write address at LBA 0, Recording mode: unknown Recording Mode (0),
	    spare area allocation: default (no action) (0), Stream recording: NO (0); return code 0
	
14:52:45	#33 Text 0 File ThreadedTransfer.cpp, Line 273
	Pipe memory size 83836800
	
14:52:45	#34 Text 0 File CUDFTransferItem2.cpp, Line 712
	 
	GenUDF2 FS Layout:
	=-=-=-=-=-=-=-=-=-=-
	    Sectors to be written: 8195872
	            Session Start: Sector 0
	         Volume Structure: Sector [0, 256] (257 Sectors)
	                Meta Data: Sector [257, 261] (5 Sectors)
	                     Data: Sector [262, 8195523] (8195262 Sectors)
	               After Data: Sector [8195524, 8195551] (28 Sectors)
	            Trailer Track: Sector [8195552, 8195871] (320 Sectors)
	 
	GenUDF2 Parameters:
	=-=-=-=-=-=-=-=-=-=-
	                 PrepTime: 10-07-2011 14:52:17
	             UDF Revision: 1.02
	       UDF Partition Type: Physical
	         UDF Special Mode: None
	         Bytes per Sector: 2048
	            Session Start: 0
	 Physical Partition Start: -1
	           Total Capacity: -1
	       Multi Session Mode: Begin
	                Disc Type: CD-R|CD-RW
	                 OS Class: 0
	                Volume ID: Bruiloft2010_D3
	     Allow Unicode Labels: 0
	      Duplicate Meta Data: 1
	             MS Info File: 033DCBF8
	        VMS Rollback File: 00000000
	        Create ISO bridge: 0
	         ECC Block Length: 32
	    Sparing Packet Length: 32
	     Allocation Unit Size: 32
	      Alignment Unit Size: 32
	            Make Writable: 0
	              Access Type: Read-only
	
14:52:46	#35 SPTI -1106 File SCSIPassThrough.cpp, Line 224
	CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1106)
	CDB Data:   0x2A 00 00 00 00 00 00 00 20 00 00 00 
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x73
	Sense Qual: 0x03
	Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 B4 73 03 
	Buffer x11470040: Len x10000
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
14:52:46	#36 TRANSFER -60 File ThreadedTransfer.cpp, Line 1222
	
14:52:46	#37 CDR -1106 File Writer.cpp, Line 335
	Power calibration error
	G: HL-DT-ST BD-RE  BH08LS20
	
14:52:46	#38 SPTI -1046 File SCSIPassThrough.cpp, Line 224
	CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1046)
	CDB Data:   0x5B 01 06 00 00 00 00 00 00 00 00 00 
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x30
	Sense Qual: 0x05
	Sense Area: 0x70 00 05 00 00 00 00 0A 5B 00 00 B4 30 05 
	
14:52:46	#39 CDR -1046 File WriterStatus.cpp, Line 291
	Illegal disc
	G: HL-DT-ST BD-RE  BH08LS20
	
14:52:46	#40 TRANSFER -24 File ThreadedTransfer.cpp, Line 1222
	Could not perform end of Disc-at-once
	
14:52:46	#41 Text 0 File DVDPlusDualLayer.cpp, Line 1462
	SetDriveCaps: Set LAST LBA of layer 1 to 0
	
14:52:46	#42 PHASE 38 File dlgbrnst.cpp, Line 1857
	Burn process failed at 2x (8,990 kB/sec)
	
14:52:46	#43 Text 0 File SCSIPTICommands.cpp, Line 301
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
14:52:46	#44 Text 0 File Cdrdrv.cpp, Line 11877
	DriveLocker: UnLockVolume completed
	
14:52:46	#45 Text 0 File SCSIPTICommands.cpp, Line 464
	UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
 
Laatst bewerkt door een moderator:
is de BD beschadigd?
En kan je eens een foto uploaden van je Disc drive??
 
Mijn blu-ray brander is niet kapot en ziet er nog 100% goed uit.
Hij is misschien nog net geen jaar oud.

image002.jpg
 
Update:

Nog een keer geprobeerd om een bluray BD-R te branden en hij geeft ook aan in Nero dat er een power calibration error is.

Vandaag nog met succes een dvd gebrand, dus het branden van een DVD-R doet hij wel met succes???
 
power calibration error is vaak het gevolg van slechte media
kun je die schijven nog ruilen ?
Probeer Verbatim en geen goedkope rommel zoals platinum philips ed.
De sony schijven schijnen ook goed te zijn
 
phillips maakt geen optische media
Er zijn maar enkele fabrieken die deze schijven produceren
Fabrikanten zoals Philips platinum sony jvc tdk kopen daar hun schijven met hun merk er op geprint
Het kan zijn dat de ene doos philips dvd's of blu-ray's van fabriek X komt en de volgende doos van fabriek Y
 
Status
Niet open voor verdere reacties.
                    Steun ons                    

Nieuwste berichten

Terug
Bovenaan Onderaan