de oplossing
heb van logitech de oplossing gekregen.
Dit gaat alsvolgt:
Subject
driver problem
Discussion Thread
Response (Pradeep N.) 10/08/2005 02:05 AM
Dear Dieter,
Thank you for your recent inquiry about your Keyboards.
I understand that the hot keys of your Logitech EX100 Cordless keyboard are not doing the assigned task.
You may be able to reset the keyboard and resolve the problem by clearing the keyboard capacitors. To do this, remove the batteries from the keyboard and type continuously on as many keys as possible for one to two minutes. This action should simulate touch-typing; you should not press and hold only some keys down.
After you clear the capacitors replace the batteries and synchronize the keyboard using the following procedure:
1: Make sure the batteries are in correctly. A diagram on the device itself or in the Getting Started Guide should tell you the correct polarity for the batteries.
2: Press the connect button on the receiver.
3: Press the connect button on the bottom or right hand edge of the keyboard.
If you are using a Cordless Desktop System, you must do this procedure for both the mouse and the keyboard.
Please refer to the following URL to download the latest software for your Logitech Cordless Desktop EX100.
http://www.logitech.com/index.cfm/downloads/software/US/EN,CRID=1796,contentid=9698